[Sun Sep 25 05:27:35 2011] Detection parameters:
  Position = (1245.4, 705.6) = 12 30 49.81 12 24 2.2
  Extent = 0.5" x 0.5", rotation angle = 136 degrees
  Source counts = 356.9 +/- 38.9
  Background counts = 1159.1
  Rate = 0.002 +/- 0.0002

[Sun Sep 25 05:28:39 2011] Off-axis axis estimate = 1.26'
[Sun Sep 25 05:51:45 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:45 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 05:51:45 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.375
[Sun Sep 25 05:51:45 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 0.38"
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src36.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src36.csv
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src36_1.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src36.csv
[Sun Sep 25 05:51:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:54 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Sun Sep 25 05:51:54 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Sep 25 05:51:54 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Sun Sep 25 05:52:48 2011] Source 68 is offset by 3.468209 and 2.694527 pixels which is larger than
2 X fitted extent = 2.301362 x 2.301362, not incorporating fit results
[Sun Sep 25 05:52:48 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:52:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:52:48 2011] Assessing source extent using major
[Sun Sep 25 05:52:48 2011] Source does appear to be extended
[Sun Sep 25 05:52:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:53:34 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:53:34 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 05:53:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.375
[Sun Sep 25 05:53:34 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 0.38"
[Sun Sep 25 05:53:36 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src32.ximg exists
[Sun Sep 25 05:53:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src32.csv
[Sun Sep 25 05:53:36 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src32_1.ximg exists
[Sun Sep 25 05:53:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src32.csv
[Sun Sep 25 05:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:53:42 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Sun Sep 25 05:53:43 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Sep 25 05:53:43 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src32 appears to have run properly
[Sun Sep 25 05:54:24 2011] Spatial fit model total counts = 6082.290000, observed total counts = 6074.000000
[Sun Sep 25 05:54:24 2011] Offset between fit and detection position for source 68 = 0.815614 pixels
[Sun Sep 25 05:54:24 2011] 5943.908000 total counts/ 5686.750000 bgd. counts: snr = 3.410107
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.815614 pixels
  Position = (1245.5, 706.4) = 12 30 49.82 12 24 2.3
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 257.2 +/- 77.1
  Background counts = 5686.8
  Rate = 0.002 +/- 0.0005
[Sun Sep 25 05:54:24 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:54:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:54:24 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:54:24 2011] Source does appear to be extended
[Sun Sep 25 05:54:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:02:25 2011] Not overwriting source region fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_src.reg
[Sun Sep 25 06:02:25 2011] Extracting stamp from image fullrun_ccd3_acisf05827_pi14-548_cl_sm2.00.img.gz, (1229, 690) - (1262, 723)
[Sun Sep 25 06:02:25 2011] Writing fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68.gif
[Sun Sep 25 06:04:36 2011] ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_src.evt and ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_bgd.evt exist, delete to re-create
[Sun Sep 25 06:04:36 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_src.evt.gz[events] = 819 counts
[Sun Sep 25 06:04:36 2011] Mean chipx,y = (902.32, 858.53)
[Sun Sep 25 06:04:36 2011] Mean tdetx,y = (4273.47, 3963.32)
[Sun Sep 25 06:04:36 2011] chipx,y range = (883.00-921.00, 839.00-876.00)
[Sun Sep 25 06:04:36 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_bgd.evt.gz[events] = 5589 counts
[Sun Sep 25 06:04:36 2011] ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_src.img and ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_bgd.img exist, delete to re-create
[Sun Sep 25 06:04:36 2011] ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_src.pi and ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_bgd.pi exist, delete to re-create
[Sun Sep 25 06:04:40 2011] ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_src.lc and ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_bgd.lc exist, delete to re-create
[Sun Sep 25 06:09:01 2011] Keeping rmf generated by specextract
[Sun Sep 25 06:09:01 2011] 202.828
[Sun Sep 25 06:09:21 2011] Updating aperture counts using extracted products
[Sun Sep 25 06:09:21 2011] Error reading totcts from fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68_src.pi.gz
[Sun Sep 25 06:09:25 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 06:09:25 2011] Using photon index=1.80, rate=0.00165, arf fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src68.arf
[Sun Sep 25 06:09:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 06:09:25 2011] Updating source flux to 1.8e-14
[Sun Sep 25 06:13:13 2011] Flag b found in src. 68 procflags, skipping spectral fitting