[Sun Sep 25 05:27:20 2011] Detection parameters:
  Position = (1352.7, 637.5) = 12 30 46.20 12 23 28.7
  Extent = 0.5" x 0.5", rotation angle = 39 degrees
  Source counts = 192.0 +/- 26.1
  Background counts = 487.0
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 05:28:39 2011] Off-axis axis estimate = 0.58'
[Sun Sep 25 05:51:45 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:45 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Sep 25 05:51:45 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.352
[Sun Sep 25 05:51:45 2011] Giving source the simple spatial ID 61 for pass 0, mean size = 0.39"
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src61.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src61.csv
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src61_1.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src61.csv
[Sun Sep 25 05:51:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:56 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Sun Sep 25 05:51:56 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Sep 25 05:51:56 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Sep 25 05:52:48 2011] Spatial fit model total counts = 3014.000000, observed total counts = 3014.000000
[Sun Sep 25 05:52:48 2011] Offset between fit and detection position for source 56 = 0.960715 pixels
[Sun Sep 25 05:52:48 2011] 2974.650000 total counts/ 2770.250000 bgd. counts: snr = 3.883483
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.960715 pixels
  Position = (1353.4, 638.1) = 12 30 46.20 12 23 28.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 204.4 +/- 54.5
  Background counts = 2770.2
  Rate = 0.001 +/- 0.0003
[Sun Sep 25 05:52:48 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:52:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:52:48 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:52:48 2011] Source does appear to be extended
[Sun Sep 25 05:52:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:53:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:53:34 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Sep 25 05:53:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.899
[Sun Sep 25 05:53:34 2011] Giving source the simple spatial ID 56 for pass 1, mean size = 0.39"
[Sun Sep 25 05:53:37 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src56.ximg exists
[Sun Sep 25 05:53:37 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src56.csv
[Sun Sep 25 05:53:37 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src56_1.ximg exists
[Sun Sep 25 05:53:37 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src56.csv
[Sun Sep 25 05:53:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:53:44 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src56.ximg exists
[Sun Sep 25 05:53:44 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src56_1.ximg exists
[Sun Sep 25 05:53:44 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src56 appears to have run properly
[Sun Sep 25 05:54:24 2011] Spatial fit model total counts = 2992.000000, observed total counts = 2992.000000
[Sun Sep 25 05:54:24 2011] Offset between fit and detection position for source 56 = 0.002943 pixels
[Sun Sep 25 05:54:24 2011] 2957.792000 total counts/ 2751.250000 bgd. counts: snr = 3.937707
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.002943 pixels
  Position = (1353.4, 638.1) = 12 30 46.20 12 23 28.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 206.5 +/- 54.4
  Background counts = 2751.2
  Rate = 0.001 +/- 0.0003
[Sun Sep 25 05:54:24 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:54:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:54:24 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:54:24 2011] Source does appear to be extended
[Sun Sep 25 05:54:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:02:26 2011] Not overwriting source region fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_src.reg
[Sun Sep 25 06:02:26 2011] Extracting stamp from image fullrun_ccd3_acisf05827_pi14-548_cl_sm2.00.img.gz, (1335, 620) - (1371, 656)
[Sun Sep 25 06:02:26 2011] Writing fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56.gif
[Sun Sep 25 06:05:55 2011] ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_src.evt and ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_bgd.evt exist, delete to re-create
[Sun Sep 25 06:05:55 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_src.evt.gz[events] = 566 counts
[Sun Sep 25 06:05:55 2011] Mean chipx,y = (943.93, 979.02)
[Sun Sep 25 06:05:55 2011] Mean tdetx,y = (4152.98, 4004.93)
[Sun Sep 25 06:05:55 2011] chipx,y range = (925.00-964.00, 960.00-998.00)
[Sun Sep 25 06:05:55 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_bgd.evt.gz[events] = 2767 counts
[Sun Sep 25 06:05:55 2011] ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_src.img and ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_bgd.img exist, delete to re-create
[Sun Sep 25 06:05:55 2011] ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_src.pi and ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_bgd.pi exist, delete to re-create
[Sun Sep 25 06:05:58 2011] ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_src.lc and ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_bgd.lc exist, delete to re-create
[Sun Sep 25 06:09:02 2011] Keeping rmf generated by specextract
[Sun Sep 25 06:09:03 2011] 204.386
[Sun Sep 25 06:09:22 2011] Updating aperture counts using extracted products
[Sun Sep 25 06:09:22 2011] Error reading totcts from fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56_src.pi.gz
[Sun Sep 25 06:09:26 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 06:09:26 2011] Using photon index=1.80, rate=0.00132, arf fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src56.arf
[Sun Sep 25 06:09:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 06:09:26 2011] Updating source flux to 1.5e-14