[Sun Sep 25 05:27:10 2011] Detection parameters: Position = (1268.4, 575.5) = 12 30 49.03 12 22 58.2 Extent = 0.5" x 0.5", rotation angle = 153 degrees Source counts = 272.1 +/- 43.6 Background counts = 1632.9 Rate = 0.002 +/- 0.0003 [Sun Sep 25 05:28:39 2011] Off-axis axis estimate = 0.45' [Sun Sep 25 05:51:45 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting [Sun Sep 25 05:51:45 2011] Initial guess for spatial extent in simple fitting = 0.40" [Sun Sep 25 05:51:45 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.325 [Sun Sep 25 05:51:45 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 0.40" [Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src45.ximg exists [Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src45.csv [Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src45_1.ximg exists [Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src45.csv [Sun Sep 25 05:51:51 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src45_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Sep 25 05:51:55 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src45.ximg exists [Sun Sep 25 05:51:55 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src45_1.ximg exists [Sun Sep 25 05:51:55 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src45 appears to have run properly [Sun Sep 25 05:52:48 2011] Spatial fit model total counts = 4658.210000, observed total counts = 4655.000000 [Sun Sep 25 05:52:48 2011] Offset between fit and detection position for source 42 = 0.801030 pixels [Sun Sep 25 05:52:48 2011] 4721.583000 total counts/ 4620.210000 bgd. counts: snr = 1.491391 Spatial fit parameters: Offset between fit and detection position for source 42 = 0.801030 pixels Position = (1268.9, 576.2) = 12 30 49.03 12 22 58.3 Extent = 0.4 (0.3-0.5)", rotation angle = 0 Source counts = 101.4 +/- 68.7 Background counts = 4620.2 Rate = 0.0006 +/- 0.0004 Deleting source due to low Poisson probability