[Sun Sep 25 05:27:01 2011] Detection parameters:
  Position = (1231.6, 607.7) = 12 30 50.27 12 23 14.0
  Extent = 0.7" x 0.7", rotation angle = 56 degrees
  Source counts = 528.6 +/- 61.6
  Background counts = 3271.4
  Rate = 0.003 +/- 0.0004

[Sun Sep 25 05:28:39 2011] Off-axis axis estimate = 0.80'
[Sun Sep 25 05:51:45 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:45 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 05:51:45 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.381
[Sun Sep 25 05:51:45 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.38"
[Sun Sep 25 05:51:50 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src23.ximg exists
[Sun Sep 25 05:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src23.csv
[Sun Sep 25 05:51:50 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src23_1.ximg exists
[Sun Sep 25 05:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src23.csv
[Sun Sep 25 05:51:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:54 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Sun Sep 25 05:51:54 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Sep 25 05:51:54 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Sep 25 05:52:48 2011] Spatial fit model total counts = 6222.730000, observed total counts = 6223.000000
[Sun Sep 25 05:52:48 2011] Offset between fit and detection position for source 20 = 2.896522 pixels
[Sun Sep 25 05:52:48 2011] 6259.075000 total counts/ 5800.380000 bgd. counts: snr = 6.022763
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.896522 pixels
  Position = (1231.8, 610.6) = 12 30 50.28 12 23 15.2
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 458.7 +/- 79.1
  Background counts = 5800.4
  Rate = 0.003 +/- 0.0005
[Sun Sep 25 05:52:48 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:52:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:52:48 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:52:48 2011] Source does appear to be extended
[Sun Sep 25 05:52:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:53:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:53:34 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Sun Sep 25 05:53:34 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Sun Sep 25 05:53:34 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 1.50"
[Sun Sep 25 05:53:36 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src22.ximg exists
[Sun Sep 25 05:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src22.csv
[Sun Sep 25 05:53:36 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src22_1.ximg exists
[Sun Sep 25 05:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src22.csv
[Sun Sep 25 05:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:53:42 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Sun Sep 25 05:53:42 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Sep 25 05:53:42 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Sun Sep 25 05:54:24 2011] Spatial fit model total counts = 7919.100000, observed total counts = 7921.000000
[Sun Sep 25 05:54:24 2011] Offset between fit and detection position for source 20 = 4.439982 pixels
[Sun Sep 25 05:54:24 2011] 7749.250000 total counts/ 6270.540000 bgd. counts: snr = 18.673707
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 4.439982 pixels
  Position = (1232.6, 614.9) = 12 30 50.25 12 23 17.3
  Extent = 3.0 (3.0-3.0)", rotation angle = 0
  Source counts = 1478.7 +/- 88.0
  Background counts = 6270.5
  Rate = 0.009 +/- 0.0006
[Sun Sep 25 05:54:24 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:54:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:54:24 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:54:24 2011] Source does appear to be extended
[Sun Sep 25 05:54:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:54:24 2011] Source is confused with source 8
[Sun Sep 25 06:02:25 2011] Not overwriting source region fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_src.reg
[Sun Sep 25 06:02:25 2011] Extracting stamp from image fullrun_ccd3_acisf05827_pi14-548_cl_sm2.00.img.gz, (1096, 478) - (1369, 752)
[Sun Sep 25 06:02:25 2011] Writing fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20.gif
[Sun Sep 25 06:03:56 2011] ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_src.evt and ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sun Sep 25 06:03:56 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_src.evt.gz[events] = 48889 counts
[Sun Sep 25 06:03:56 2011] Mean chipx,y = (838.19, 922.52)
[Sun Sep 25 06:03:56 2011] Mean tdetx,y = (4209.48, 3899.19)
[Sun Sep 25 06:03:56 2011] chipx,y range = (795.00-876.00, 881.00-962.00)
[Sun Sep 25 06:03:57 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 242709 counts
[Sun Sep 25 06:03:57 2011] ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_src.img and ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sun Sep 25 06:03:57 2011] ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_src.pi and ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sun Sep 25 06:04:00 2011] ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_src.lc and ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sun Sep 25 06:09:01 2011] Keeping rmf generated by specextract
[Sun Sep 25 06:09:01 2011] 202.87
[Sun Sep 25 06:09:20 2011] Updating aperture counts using extracted products
[Sun Sep 25 06:09:20 2011] Error reading totcts from fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20_src.pi.gz
[Sun Sep 25 06:09:25 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 06:09:25 2011] Using photon index=1.80, rate=0.00947, arf fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src20.arf
[Sun Sep 25 06:09:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 06:09:25 2011] Updating source flux to 1.1e-13
[Sun Sep 25 06:13:13 2011] Flag c found in src. 20 procflags, skipping spectral fitting