[Sun Sep 25 05:26:54 2011] Detection parameters:
  Position = (1280.5, 645.4) = 12 30 48.63 12 23 32.6
  Extent = 0.7" x 0.5", rotation angle = 23 degrees
  Source counts = 17583.0 +/- 154.0
  Background counts = 6145.0
  Rate = 0.1 +/- 0.001

[Sun Sep 25 05:28:39 2011] Off-axis axis estimate = 0.69'
[Sun Sep 25 05:51:45 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:45 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 05:51:45 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.369
[Sun Sep 25 05:51:45 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.38"
[Sun Sep 25 05:51:50 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src3.ximg exists
[Sun Sep 25 05:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 05:51:50 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Sep 25 05:51:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 05:51:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:54 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Sep 25 05:51:54 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Sep 25 05:51:54 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Sep 25 05:52:47 2011] Spatial fit model total counts = 28382.300000, observed total counts = 28380.000000
[Sun Sep 25 05:52:47 2011] Offset between fit and detection position for source 2 = 0.513866 pixels
[Sun Sep 25 05:52:47 2011] 28278.600000 total counts/ 14866.300000 bgd. counts: snr = 110.002312
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.513866 pixels
  Position = (1280.8, 645.9) = 12 30 48.63 12 23 32.6
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 13412.3 +/- 168.2
  Background counts = 14866.3
  Rate = 0.09 +/- 0.001
[Sun Sep 25 05:52:48 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:52:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:52:48 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:52:48 2011] Source does appear to be extended
[Sun Sep 25 05:52:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:53:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:53:34 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Sun Sep 25 05:53:34 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.955
[Sun Sep 25 05:53:34 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.51"
[Sun Sep 25 05:53:36 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src3.ximg exists
[Sun Sep 25 05:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 05:53:36 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Sep 25 05:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 05:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:53:42 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Sep 25 05:53:42 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Sep 25 05:53:42 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Sep 25 05:54:24 2011] Spatial fit model total counts = 28338.500000, observed total counts = 28380.000000
[Sun Sep 25 05:54:24 2011] Offset between fit and detection position for source 2 = 0.006967 pixels
[Sun Sep 25 05:54:24 2011] 28228.800000 total counts/ 14742.200000 bgd. counts: snr = 111.076280
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.006967 pixels
  Position = (1280.8, 645.9) = 12 30 48.63 12 23 32.6
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 13486.6 +/- 168.0
  Background counts = 14742.2
  Rate = 0.09 +/- 0.001
[Sun Sep 25 05:54:24 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:54:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:54:24 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:54:24 2011] Source does appear to be extended
[Sun Sep 25 05:54:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:02:23 2011] Not overwriting source region fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_src.reg
[Sun Sep 25 06:02:23 2011] Extracting stamp from image fullrun_ccd3_acisf05827_pi14-548_cl_sm2.00.img.gz, (1257, 622) - (1305, 670)
[Sun Sep 25 06:02:23 2011] Writing fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2.gif
[Sun Sep 25 06:02:35 2011] ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_src.evt and ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Sep 25 06:02:35 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_src.evt.gz[events] = 17467 counts
[Sun Sep 25 06:02:35 2011] Mean chipx,y = (892.34, 927.58)
[Sun Sep 25 06:02:35 2011] Mean tdetx,y = (4204.42, 3953.34)
[Sun Sep 25 06:02:35 2011] chipx,y range = (872.00-913.00, 907.00-948.00)
[Sun Sep 25 06:02:35 2011] Size of ../../acisf05827/products/events/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 10731 counts
[Sun Sep 25 06:02:35 2011] ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_src.img and ../../acisf05827/products/images/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Sep 25 06:02:35 2011] ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_src.pi and ../../acisf05827/products/spectra/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Sep 25 06:02:40 2011] ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_src.lc and ../../acisf05827/products/lightcurves/fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Sep 25 06:09:00 2011] Keeping rmf generated by specextract
[Sun Sep 25 06:09:00 2011] 203.681
[Sun Sep 25 06:09:20 2011] Updating aperture counts using extracted products
[Sun Sep 25 06:09:20 2011] Error reading totcts from fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Sep 25 06:09:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 06:09:24 2011] Using photon index=1.80, rate=0.0863, arf fullrun_ccd3_acisf05827_pi14-548_pass1_cl_src2.arf
[Sun Sep 25 06:09:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 06:09:24 2011] Updating source flux to 9.6e-13