[Sun Sep 25 05:28:01 2011] Detection parameters:
  Position = (733.3, 1294.4) = 12 31 7.01 12 28 51.9
  Extent = 0.8" x 0.5", rotation angle = 129 degrees
  Source counts = 178.9 +/- 17.7
  Background counts = 134.1
  Rate = 0.001 +/- 0.0001

[Sun Sep 25 05:28:39 2011] Off-axis axis estimate = 7.64'
[Sun Sep 25 05:51:45 2011] Using EEF radius (= 2.58 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:45 2011] Initial guess for spatial extent in simple fitting = 2.58"
[Sun Sep 25 05:51:45 2011] source mask rpix=5.3, npix_max = 132, mask sum = 121, frac = 0.914
[Sun Sep 25 05:51:45 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 2.58"
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src65.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src65.csv
[Sun Sep 25 05:51:51 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src65_1.ximg exists
[Sun Sep 25 05:51:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src65.csv
[Sun Sep 25 05:51:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05827_pi14-548_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:56 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Sun Sep 25 05:51:56 2011] fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Sun Sep 25 05:51:56 2011] Fit fullrun_ccd3_acisf05827_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Sun Sep 25 05:52:48 2011] Warning, spatial fit 65 centroid is now closest to src. 163
[Sun Sep 25 05:52:48 2011] Spatial fit model total counts = 1466.940000, observed total counts = 1466.000000
[Sun Sep 25 05:52:48 2011] Offset between fit and detection position for source 164 = 2.646880 pixels
[Sun Sep 25 05:52:48 2011] Warning, changing simple spatial fit ID from 65 to 83
[Sun Sep 25 05:52:48 2011] 1477.427700 total counts/ 1465.920000 bgd. counts: snr = 0.300562
Spatial fit parameters:
  Offset between fit and detection position for source 164 = 2.646880 pixels
  Position = (730.6, 1294.3) = 12 31 7.12 12 28 51.5
  Extent = 0.7" x 0.7", rotation angle = 0
  Source counts = 11.5 +/- 38.4
  Background counts = 1465.9
  Rate = 7e-05 +/- 0.0002
  Deleting source due to low Poisson probability