[Sun Sep 25 05:26:28 2011] Detection parameters:
  Position = (661.5, 1237.5) = 12 30 47.89 12 21 43.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 10.8 +/- 11.8
  Background counts = 128.2
  Rate = 7e-05 +/- 8e-05

[Sun Sep 25 05:26:53 2011] Off-axis axis estimate = 1.23'
[Sun Sep 25 05:51:27 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:27 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 05:51:27 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.919
[Sun Sep 25 05:51:27 2011] Giving source the simple spatial ID 79 for pass 0, mean size = 0.38"
[Sun Sep 25 05:51:41 2011] fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src79.ximg exists
[Sun Sep 25 05:51:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src79.csv
[Sun Sep 25 05:51:41 2011] fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src79_1.ximg exists
[Sun Sep 25 05:51:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src79.csv
[Sun Sep 25 05:51:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:44 2011] fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src79.ximg exists
[Sun Sep 25 05:51:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src79.csv
[Sun Sep 25 05:51:44 2011] fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src79_1.ximg exists
[Sun Sep 25 05:51:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src79.csv
[Sun Sep 25 05:51:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:52:34 2011] Source 65 is offset by -3.197398 and 0.306750 pixels which is larger than
2 X fitted extent = 1.843878 x 1.843878, not incorporating fit results
[Sun Sep 25 05:52:34 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:52:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:52:34 2011] Assessing source extent using major
[Sun Sep 25 05:52:34 2011] Source does appear to be extended
[Sun Sep 25 05:52:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:52:34 2011] Deleting source due to low Poisson probability 0.6