[Sun Sep 25 05:26:44 2011] Detection parameters:
  Position = (748.7, 1119.6) = 12 30 44.96 12 20 45.9
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 21.4 +/- 9.8
  Background counts = 75.6
  Rate = 0.0001 +/- 6e-05

[Sun Sep 25 05:26:53 2011] Off-axis axis estimate = 2.25'
[Sun Sep 25 05:51:27 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:27 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sun Sep 25 05:51:27 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.098
[Sun Sep 25 05:51:27 2011] Giving source the simple spatial ID 61 for pass 0, mean size = 0.46"
[Sun Sep 25 05:51:40 2011] fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src61.ximg exists
[Sun Sep 25 05:51:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src61.csv
[Sun Sep 25 05:51:40 2011] fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src61_1.ximg exists
[Sun Sep 25 05:51:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src61.csv
[Sun Sep 25 05:51:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05827_pi14-548_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:42 2011] fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Sun Sep 25 05:51:42 2011] fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Sep 25 05:51:42 2011] Fit fullrun_ccd2_acisf05827_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Sep 25 05:52:34 2011] Spatial fit model total counts = 795.218000, observed total counts = 771.000000
[Sun Sep 25 05:52:34 2011] Offset between fit and detection position for source 133 = 1.242440 pixels
[Sun Sep 25 05:52:34 2011] 802.949900 total counts/ 783.917000 bgd. counts: snr = 0.679782
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 1.242440 pixels
  Position = (749.9, 1119.7) = 12 30 44.94 12 20 45.7
  Extent = 0.5 (0.1-1.5)", rotation angle = 0
  Source counts = 19.0 +/- 28.3
  Background counts = 783.9
  Rate = 0.0001 +/- 0.0002
  Deleting source due to low Poisson probability