[Sun Sep 25 05:25:48 2011] Detection parameters:
  Position = (216.8, 659.2) = 12 30 35.39 12 22 22.1
  Extent = 0.5" x 0.5", rotation angle = 152 degrees
  Source counts = 11.4 +/- 6.7
  Background counts = 33.6
  Rate = 7e-05 +/- 4e-05

[Sun Sep 25 05:26:01 2011] Off-axis axis estimate = 2.94'
[Sun Sep 25 05:51:15 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:51:15 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Sun Sep 25 05:51:15 2011] source mask rpix=1.2, npix_max = 10, mask sum = 6, frac = 0.547
[Sun Sep 25 05:51:15 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.57"
[Sun Sep 25 05:51:18 2011] fullrun_ccd0_acisf05827_pi14-548_cl_pass0_src20.ximg exists
[Sun Sep 25 05:51:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05827_pi14-548_cl_pass0_src20.csv
[Sun Sep 25 05:51:18 2011] fullrun_ccd0_acisf05827_pi14-548_cl_pass0_src20_1.ximg exists
[Sun Sep 25 05:51:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05827_pi14-548_cl_pass0_src20.csv
[Sun Sep 25 05:51:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05827_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05827_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:51:19 2011] fullrun_ccd0_acisf05827_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sun Sep 25 05:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05827_pi14-548_cl_pass0_tfrozen_src20.csv
[Sun Sep 25 05:51:19 2011] fullrun_ccd0_acisf05827_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Sep 25 05:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05827_pi14-548_cl_pass0_tfrozen_src20.csv
[Sun Sep 25 05:51:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05827_pi14-548_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05827_pi14-548_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:52:13 2011] Source 22 is offset by 2.248801 and 2.139370 pixels which is larger than
2 X fitted extent = 0.582902 x 0.582902, not incorporating fit results
[Sun Sep 25 05:52:13 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:52:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:52:13 2011] Assessing source extent using major
[Sun Sep 25 05:52:13 2011] Source does appear to be extended
[Sun Sep 25 05:52:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:52:13 2011] Deleting source due to low Poisson probability 0.7