[Mon Sep 26 11:25:38 2011] Detection parameters:
  Position = (525.6, 354.3) = 12 58 52.79 -1 41 43.2
  Extent = 0.5" x 0.5", rotation angle = 127 degrees
  Source counts = 44.6 +/- 6.9
  Background counts = 2.4
  Rate = 0.001 +/- 0.0002

[Mon Sep 26 11:25:42 2011] Off-axis axis estimate = 2.67'
[Mon Sep 26 11:26:49 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:26:49 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Mon Sep 26 11:26:49 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.930
[Mon Sep 26 11:26:49 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.52"
[Mon Sep 26 11:26:49 2011] fullrun_ccd2_acisf05823_pi14-548_cl_pass0_src6.ximg exists
[Mon Sep 26 11:26:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05823_pi14-548_cl_pass0_src6.csv
[Mon Sep 26 11:26:49 2011] fullrun_ccd2_acisf05823_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Sep 26 11:26:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05823_pi14-548_cl_pass0_src6.csv
[Mon Sep 26 11:26:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05823_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05823_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:26:50 2011] fullrun_ccd2_acisf05823_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Sep 26 11:26:50 2011] fullrun_ccd2_acisf05823_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Sep 26 11:26:50 2011] Fit fullrun_ccd2_acisf05823_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Sep 26 11:27:00 2011] Spatial fit model total counts = 48.411800, observed total counts = 50.000000
[Mon Sep 26 11:27:00 2011] Offset between fit and detection position for source 4 = 0.585652 pixels
[Mon Sep 26 11:27:00 2011] 49.134350 total counts/ 4.707150 bgd. counts: snr = 20.477169
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.585652 pixels
  Position = (526.0, 354.7) = 12 58 52.80 -1 41 43.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 44.4 +/- 7.0
  Background counts = 4.7
  Rate = 0.001 +/- 0.0002
[Mon Sep 26 11:27:00 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:27:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:27:00 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 11:27:00 2011] Source does appear to be extended
[Mon Sep 26 11:27:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 11:27:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:27:23 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Mon Sep 26 11:27:23 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.199
[Mon Sep 26 11:27:23 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.53"
[Mon Sep 26 11:27:23 2011] fullrun_ccd2_acisf05823_pi14-548_cl_pass1_src6.ximg exists
[Mon Sep 26 11:27:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05823_pi14-548_cl_pass1_src6.csv
[Mon Sep 26 11:27:23 2011] fullrun_ccd2_acisf05823_pi14-548_cl_pass1_src6_1.ximg exists
[Mon Sep 26 11:27:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05823_pi14-548_cl_pass1_src6.csv
[Mon Sep 26 11:27:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05823_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05823_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:27:24 2011] fullrun_ccd2_acisf05823_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon Sep 26 11:27:24 2011] fullrun_ccd2_acisf05823_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Sep 26 11:27:24 2011] Fit fullrun_ccd2_acisf05823_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Sep 26 11:27:33 2011] Spatial fit model total counts = 49.192700, observed total counts = 52.000000
[Mon Sep 26 11:27:33 2011] Offset between fit and detection position for source 4 = 0.015425 pixels
[Mon Sep 26 11:27:33 2011] 50.601250 total counts/ 6.564450 bgd. counts: snr = 17.187653
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.015425 pixels
  Position = (526.0, 354.7) = 12 58 52.80 -1 41 43.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 44.0 +/- 7.1
  Background counts = 6.6
  Rate = 0.001 +/- 0.0002
[Mon Sep 26 11:27:33 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:27:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:27:33 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 11:27:33 2011] Source does appear to be extended
[Mon Sep 26 11:27:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 11:29:05 2011] Not overwriting source region fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_src.reg
[Mon Sep 26 11:29:05 2011] Extracting stamp from image fullrun_ccd2_acisf05823_pi14-548_cl_sm2.00.img.gz, (502, 331) - (550, 379)
[Mon Sep 26 11:29:05 2011] Writing fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4.gif
[Mon Sep 26 11:29:35 2011] ../../acisf05823/products/events/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_src.evt and ../../acisf05823/products/events/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon Sep 26 11:29:35 2011] Size of ../../acisf05823/products/events/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_src.evt.gz[events] = 45 counts
[Mon Sep 26 11:29:35 2011] Mean chipx,y = (228.60, 746.02)
[Mon Sep 26 11:29:35 2011] Mean tdetx,y = (3807.02, 3857.40)
[Mon Sep 26 11:29:35 2011] chipx,y range = (210.00-246.00, 732.00-766.00)
[Mon Sep 26 11:29:35 2011] Size of ../../acisf05823/products/events/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 20 counts
[Mon Sep 26 11:29:35 2011] ../../acisf05823/products/images/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_src.img and ../../acisf05823/products/images/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon Sep 26 11:29:35 2011] ../../acisf05823/products/spectra/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_src.pi and ../../acisf05823/products/spectra/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon Sep 26 11:29:35 2011] Not generating rmf since there are only 44 counts
[Mon Sep 26 11:29:38 2011] ../../acisf05823/products/lightcurves/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_src.lc and ../../acisf05823/products/lightcurves/fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon Sep 26 11:30:48 2011] 201.721
[Mon Sep 26 11:31:59 2011] Updating aperture counts using extracted products
[Mon Sep 26 11:31:59 2011] Error reading totcts from fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Sep 26 11:32:00 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 11:32:00 2011] Using photon index=1.80, rate=0.00111, arf fullrun_ccd2_acisf05823_pi14-548_pass1_cl_src4.arf
[Mon Sep 26 11:32:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 11:32:00 2011] Updating source flux to 1.3e-14
[Mon Sep 26 11:32:14 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting