[Thu Jan 19 04:41:11 2012] Detection parameters:
  Position = (387.2, 431.9) = 3 32 11.44 -27 52 13.9
  Extent = 1.2" x 0.7", rotation angle = 13 degrees
  Source counts = 64.7 +/- 8.4
  Background counts = 5.3
  Rate = 0.0005 +/- 6e-05

[Thu Jan 19 04:41:15 2012] Off-axis axis estimate = 5.21'
[Thu Jan 19 06:04:32 2012] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 06:04:32 2012] Initial guess for spatial extent in simple fitting = 1.27"
[Thu Jan 19 06:04:32 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.950
[Thu Jan 19 06:04:32 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 1.27"
[Thu Jan 19 06:47:15 2012] fullrun_ccd2_acisf00582_pi14-548_cl_pass0_src5.ximg exists
[Thu Jan 19 06:47:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00582_pi14-548_cl_pass0_src5.csv
[Thu Jan 19 06:47:15 2012] fullrun_ccd2_acisf00582_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Jan 19 06:47:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00582_pi14-548_cl_pass0_src5.csv
[Thu Jan 19 06:47:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00582_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00582_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 06:47:16 2012] fullrun_ccd2_acisf00582_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Jan 19 06:47:16 2012] fullrun_ccd2_acisf00582_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jan 19 06:47:16 2012] Fit fullrun_ccd2_acisf00582_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jan 19 07:56:52 2012] Spatial fit model total counts = 72.354500, observed total counts = 72.000000
[Thu Jan 19 07:56:52 2012] Offset between fit and detection position for source 3 = 1.498659 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.498659 pixels
  Position = (388.5, 432.7) = 3 32 11.41 -27 52 13.8
  Extent = 1.3 (0.9-1.5)", rotation angle = 0
  Source counts = 70.4 +/- 8.4
  Background counts = 0.0
  Rate = 0.0005 +/- 6e-05
[Thu Jan 19 07:56:52 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 07:56:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 07:56:52 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 07:56:52 2012] Source does appear to be extended
[Thu Jan 19 07:56:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 09:13:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 09:13:25 2012] Initial guess for spatial extent in simple fitting = 1.28"
[Thu Jan 19 09:13:25 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.095
[Thu Jan 19 09:13:25 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 1.28"
[Thu Jan 19 09:56:57 2012] fullrun_ccd2_acisf00582_pi14-548_cl_pass1_src5.ximg exists
[Thu Jan 19 09:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00582_pi14-548_cl_pass1_src5.csv
[Thu Jan 19 09:56:57 2012] fullrun_ccd2_acisf00582_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Jan 19 09:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00582_pi14-548_cl_pass1_src5.csv
[Thu Jan 19 09:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00582_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00582_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 09:56:57 2012] fullrun_ccd2_acisf00582_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan 19 09:56:57 2012] fullrun_ccd2_acisf00582_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan 19 09:56:57 2012] Fit fullrun_ccd2_acisf00582_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jan 19 10:56:45 2012] Spatial fit model total counts = 72.857300, observed total counts = 72.000000
[Thu Jan 19 10:56:45 2012] Offset between fit and detection position for source 3 = 0.340159 pixels
[Thu Jan 19 10:56:45 2012] 72.472300 total counts/ 12.230600 bgd. counts: snr = 17.225560
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.340159 pixels
  Position = (388.1, 432.7) = 3 32 11.42 -27 52 13.8
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 60.2 +/- 8.5
  Background counts = 12.2
  Rate = 0.0005 +/- 7e-05
[Thu Jan 19 10:56:45 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 10:56:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 10:56:45 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 10:56:45 2012] Source does appear to be extended
[Thu Jan 19 10:56:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 11:31:48 2012] Writing source region out to fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3_src.reg
[Thu Jan 19 11:31:48 2012] Extracting stamp from image fullrun_ccd2_acisf00582_pi14-548_cl_sm2.00.img.gz, (338, 382) - (439, 483)
[Thu Jan 19 11:31:48 2012] Writing fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3.gif
[Thu Jan 19 11:34:06 2012] Size of ../../acisf00582/products/events/fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3_src.evt.gz[events] = 71 counts
[Thu Jan 19 11:34:06 2012] Mean chipx,y = (636.11, 810.44)
[Thu Jan 19 11:34:06 2012] Mean tdetx,y = (3871.44, 3449.89)
[Thu Jan 19 11:34:06 2012] chipx,y range = (616.00-652.00, 793.00-835.00)
[Thu Jan 19 11:34:06 2012] Size of ../../acisf00582/products/events/fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 85 counts
[Thu Jan 19 11:34:07 2012] Not generating rmf since there are only 60 counts
[Thu Jan 19 11:34:07 2012] arf not found, will run specextract
[Thu Jan 19 11:34:35 2012] ../../acisf00582/products/spectra/fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3.warf not found
[Thu Jan 19 11:34:35 2012] ../../acisf00582/products/spectra/fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3.wrmf not found
[Thu Jan 19 11:34:35 2012] Removal of ../../acisf00582/products/spectra/fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3.soff failed
[Thu Jan 19 12:00:42 2012] Spectrum 3 has only 60 counts, deleting rmf
[Thu Jan 19 12:00:42 2012] 183.221
[Thu Jan 19 12:22:50 2012] Updating aperture counts using extracted products
[Thu Jan 19 12:22:50 2012] Error reading totcts from fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Jan 19 12:22:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 12:22:51 2012] Using photon index=1.80, rate=0.000461, arf fullrun_ccd2_acisf00582_pi14-548_pass1_cl_src3.arf
[Thu Jan 19 12:22:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 12:22:51 2012] Updating source flux to 5.2e-15
[Thu Jan 19 12:23:27 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting