[Sat Oct 22 14:04:41 2011] Detection parameters:
  Position = (553.9, 867.2) = 1 59 16.62 -34 8 45.7
  Extent = 1.5" x 0.7", rotation angle = 63 degrees
  Source counts = 34.0 +/- 5.9
  Background counts = 1.0
  Rate = 0.004 +/- 0.0006

[Sat Oct 22 14:04:43 2011] Off-axis axis estimate = 6.63'
[Sat Oct 22 14:05:18 2011] Using EEF radius (= 1.97 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:05:18 2011] Initial guess for spatial extent in simple fitting = 1.97"
[Sat Oct 22 14:05:18 2011] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.002
[Sat Oct 22 14:05:18 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.97"
[Sat Oct 22 14:05:18 2011] fullrun_ccd3_acisf05818_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 22 14:05:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05818_pi14-548_cl_pass0_src2.csv
[Sat Oct 22 14:05:18 2011] fullrun_ccd3_acisf05818_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 22 14:05:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05818_pi14-548_cl_pass0_src2.csv
[Sat Oct 22 14:05:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05818_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05818_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:05:18 2011] fullrun_ccd3_acisf05818_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 22 14:05:18 2011] fullrun_ccd3_acisf05818_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 22 14:05:18 2011] Fit fullrun_ccd3_acisf05818_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 22 14:05:26 2011] Spatial fit model total counts = 36.125900, observed total counts = 36.000000
[Sat Oct 22 14:05:26 2011] Offset between fit and detection position for source 4 = 0.775303 pixels
[Sat Oct 22 14:05:26 2011] 36.462960 total counts/ 8.017060 bgd. counts: snr = 10.046438
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.775303 pixels
  Position = (554.2, 867.9) = 1 59 16.63 -34 8 45.6
  Extent = 1.2 (0.9-1.5)", rotation angle = 0
  Source counts = 28.4 +/- 6.0
  Background counts = 8.0
  Rate = 0.003 +/- 0.0006
[Sat Oct 22 14:05:26 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:05:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:05:26 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:05:26 2011] Source does appear to be extended
[Sat Oct 22 14:05:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:05:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:05:41 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Sat Oct 22 14:05:41 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.099
[Sat Oct 22 14:05:41 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.16"
[Sat Oct 22 14:05:41 2011] fullrun_ccd3_acisf05818_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 22 14:05:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05818_pi14-548_cl_pass1_src2.csv
[Sat Oct 22 14:05:41 2011] fullrun_ccd3_acisf05818_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 22 14:05:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05818_pi14-548_cl_pass1_src2.csv
[Sat Oct 22 14:05:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05818_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05818_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:05:41 2011] fullrun_ccd3_acisf05818_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 22 14:05:41 2011] fullrun_ccd3_acisf05818_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 22 14:05:41 2011] Fit fullrun_ccd3_acisf05818_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 22 14:05:49 2011] Spatial fit model total counts = 32.968700, observed total counts = 33.000000
[Sat Oct 22 14:05:49 2011] Offset between fit and detection position for source 4 = 0.289040 pixels
[Sat Oct 22 14:05:49 2011] 33.395120 total counts/ 8.572020 bgd. counts: snr = 8.478410
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.289040 pixels
  Position = (554.3, 868.2) = 1 59 16.63 -34 8 45.5
  Extent = 1.0 (0.8-1.6)", rotation angle = 0
  Source counts = 24.8 +/- 5.8
  Background counts = 8.6
  Rate = 0.003 +/- 0.0006
[Sat Oct 22 14:05:49 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:05:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:05:49 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:05:49 2011] Source does appear to be extended
[Sat Oct 22 14:05:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:07:06 2011] Not overwriting source region fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_src.reg
[Sat Oct 22 14:07:06 2011] Extracting stamp from image fullrun_ccd3_acisf05818_pi14-548_cl_sm2.00.img.gz, (509, 823) - (599, 913)
[Sat Oct 22 14:07:06 2011] Writing fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4.gif
[Sat Oct 22 14:07:09 2011] ../../acisf05818/products/events/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_src.evt and ../../acisf05818/products/events/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sat Oct 22 14:07:09 2011] Size of ../../acisf05818/products/events/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_src.evt.gz[events] = 33 counts
[Sat Oct 22 14:07:09 2011] Mean chipx,y = (545.55, 231.52)
[Sat Oct 22 14:07:09 2011] Mean tdetx,y = (4900.48, 3606.55)
[Sat Oct 22 14:07:09 2011] chipx,y range = (527.00-561.00, 215.00-255.00)
[Sat Oct 22 14:07:09 2011] Size of ../../acisf05818/products/events/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 4 counts
[Sat Oct 22 14:07:09 2011] ../../acisf05818/products/images/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_src.img and ../../acisf05818/products/images/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sat Oct 22 14:07:09 2011] ../../acisf05818/products/spectra/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_src.pi and ../../acisf05818/products/spectra/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sat Oct 22 14:07:09 2011] Not generating rmf since there are only 24 counts
[Sat Oct 22 14:07:12 2011] ../../acisf05818/products/lightcurves/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_src.lc and ../../acisf05818/products/lightcurves/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sat Oct 22 14:07:44 2011] 176.308
[Sat Oct 22 14:07:53 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:07:53 2011] Error reading totcts from fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Oct 22 14:07:53 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:07:53 2011] Using photon index=1.80, rate=0.00264, arf fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4.arf
[Sat Oct 22 14:07:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:07:53 2011] Updating source flux to 3.5e-14
[Sat Oct 22 14:07:58 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 14:07:59 2011] acisf05818/analysis//spectral/fullrun_ccd3_acisf05818_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete