[Wed Jan 18 19:53:00 2012] Detection parameters:
  Position = (814.8, 946.2) = 3 32 1.53 -27 46 47.2
  Extent = 1.4" x 0.9", rotation angle = 54 degrees
  Source counts = 20.6 +/- 5.1
  Background counts = 5.4
  Rate = 0.0005 +/- 0.0001

[Wed Jan 18 19:53:00 2012] Off-axis axis estimate = 6.34'
[Wed Jan 18 20:36:30 2012] Using EEF radius (= 1.81 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 20:36:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 20:36:30 2012] Initial guess for spatial extent in simple fitting = 1.81"
[Wed Jan 18 20:36:30 2012] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.920
[Wed Jan 18 20:36:30 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 1.81"
[Wed Jan 18 20:47:37 2012] fullrun_ccd3_acisf00581_pi14-548_cl_pass0_src5.ximg exists
[Wed Jan 18 20:47:37 2012] fullrun_ccd3_acisf00581_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Jan 18 20:47:37 2012] Fit fullrun_ccd3_acisf00581_pi14-548_cl_pass0_src5 appears to have run properly
[Wed Jan 18 20:47:37 2012] fullrun_ccd3_acisf00581_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Jan 18 20:47:37 2012] fullrun_ccd3_acisf00581_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jan 18 20:47:37 2012] Fit fullrun_ccd3_acisf00581_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jan 18 20:47:44 2012] Spatial fit model total counts = 51.922700, observed total counts = 52.000000
[Wed Jan 18 20:47:44 2012] Offset between fit and detection position for source 10 = 2.132587 pixels
[Wed Jan 18 20:47:44 2012] 51.860500 total counts/ 33.948800 bgd. counts: snr = 3.074147
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.132587 pixels
  Position = (816.6, 947.4) = 3 32 1.49 -27 46 46.8
  Extent = 1.0 (0.6-2.0)", rotation angle = 0
  Source counts = 17.9 +/- 7.2
  Background counts = 33.9
  Rate = 0.0004 +/- 0.0002
[Wed Jan 18 20:47:44 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 20:47:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 20:47:44 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 20:47:44 2012] Source does appear to be extended
[Wed Jan 18 20:47:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 21:34:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 21:34:11 2012] Initial guess for spatial extent in simple fitting = 1.03"
[Wed Jan 18 21:34:11 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Wed Jan 18 21:34:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 1.03"
[Wed Jan 18 21:42:38 2012] fullrun_ccd3_acisf00581_pi14-548_cl_pass1_src5.ximg exists
[Wed Jan 18 21:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00581_pi14-548_cl_pass1_src5.csv
[Wed Jan 18 21:42:38 2012] fullrun_ccd3_acisf00581_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Jan 18 21:42:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00581_pi14-548_cl_pass1_src5.csv
[Wed Jan 18 21:42:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00581_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00581_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 21:42:39 2012] fullrun_ccd3_acisf00581_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Jan 18 21:42:39 2012] fullrun_ccd3_acisf00581_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jan 18 21:42:39 2012] Fit fullrun_ccd3_acisf00581_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jan 18 21:42:45 2012] Spatial fit model total counts = 40.809300, observed total counts = 41.000000
[Wed Jan 18 21:42:45 2012] Offset between fit and detection position for source 10 = 0.263969 pixels
[Wed Jan 18 21:42:45 2012] 39.192300 total counts/ 23.780900 bgd. counts: snr = 3.160297
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.263969 pixels
  Position = (816.9, 947.4) = 3 32 1.48 -27 46 46.8
  Extent = 1.0 (0.5-1.9)", rotation angle = 0
  Source counts = 15.4 +/- 6.3
  Background counts = 23.8
  Rate = 0.0004 +/- 0.0001
[Wed Jan 18 21:42:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 21:42:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 21:42:45 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 21:42:45 2012] Source does appear to be extended
[Wed Jan 18 21:42:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 21:52:34 2012] Writing source region out to fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10_src.reg
[Wed Jan 18 21:52:34 2012] Extracting stamp from image fullrun_ccd3_acisf00581_pi14-548_cl_sm2.00.img.gz, (773, 904) - (861, 991)
[Wed Jan 18 21:52:34 2012] Writing fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10.gif
[Wed Jan 18 21:53:42 2012] Size of ../../acisf00581/products/events/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10_src.evt.gz[events] = 28 counts
[Wed Jan 18 21:53:42 2012] Mean chipx,y = (295.14, 623.21)
[Wed Jan 18 21:53:42 2012] Mean tdetx,y = (4508.79, 3356.14)
[Wed Jan 18 21:53:42 2012] chipx,y range = (273.00-313.00, 604.00-638.00)
[Wed Jan 18 21:53:42 2012] Size of ../../acisf00581/products/events/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 177 counts
[Wed Jan 18 21:53:44 2012] Not generating rmf since there are only 15 counts
[Wed Jan 18 21:53:44 2012] arf not found, will run specextract
[Wed Jan 18 21:53:50 2012] ../../acisf00581/products/spectra/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10_bkg.pi not found
[Wed Jan 18 21:53:50 2012] ../../acisf00581/products/spectra/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10.warf not found
[Wed Jan 18 21:53:50 2012] ../../acisf00581/products/spectra/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10.wrmf not found
[Wed Jan 18 21:53:50 2012] Removal of ../../acisf00581/products/spectra/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10.soff failed
[Wed Jan 18 21:53:50 2012] Failed to rename ../../acisf00581/products/spectra/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10_grp.pi to ../../acisf00581/products/spectra/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10_src.pi
[Wed Jan 18 21:56:26 2012] 176.495
[Wed Jan 18 21:56:28 2012] Updating aperture counts using extracted products
[Wed Jan 18 21:56:28 2012] Error reading totcts from fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10_src.pi
[Wed Jan 18 21:56:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 21:56:29 2012] Using photon index=1.80, rate=0.000357, arf fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10.arf
[Wed Jan 18 21:56:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 21:56:29 2012] Updating source flux to 3.8e-15
[Wed Jan 18 21:56:33 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jan 18 21:56:34 2012] acisf00581/analysis//spectral/fullrun_ccd3_acisf00581_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete