[Fri Oct 28 18:02:27 2011] Detection parameters:
  Position = (383.2, 1086.9) = 13 55 57.26 -11 39 18.7
  Extent = 0.7" x 0.5", rotation angle = 89 degrees
  Source counts = 12.6 +/- 3.6
  Background counts = 0.4
  Rate = 0.0006 +/- 0.0002

[Fri Oct 28 18:02:28 2011] Off-axis axis estimate = 2.85'
[Fri Oct 28 18:03:07 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 18:03:07 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct 28 18:03:07 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.141
[Fri Oct 28 18:03:07 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.55"
[Fri Oct 28 18:03:11 2011] fullrun_ccd3_acisf05804_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct 28 18:03:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05804_pi14-548_cl_pass0_src11.csv
[Fri Oct 28 18:03:11 2011] fullrun_ccd3_acisf05804_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct 28 18:03:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05804_pi14-548_cl_pass0_src11.csv
[Fri Oct 28 18:03:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05804_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05804_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 18:03:12 2011] fullrun_ccd3_acisf05804_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct 28 18:03:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05804_pi14-548_cl_pass0_tfrozen_src11.csv
[Fri Oct 28 18:03:12 2011] fullrun_ccd3_acisf05804_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct 28 18:03:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05804_pi14-548_cl_pass0_tfrozen_src11.csv
[Fri Oct 28 18:03:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05804_pi14-548_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05804_pi14-548_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 18:03:20 2011] Spatial fit model total counts = 11.656100, observed total counts = 14.000000
[Fri Oct 28 18:03:20 2011] Offset between fit and detection position for source 10 = 0.475727 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.475727 pixels
  Position = (383.7, 1087.0) = 13 55 57.26 -11 39 18.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 12.4 +/- 3.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Fri Oct 28 18:03:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 18:03:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 18:03:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 18:03:20 2011] Source does appear to be extended
[Fri Oct 28 18:03:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 18:03:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 18:03:38 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct 28 18:03:38 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.076
[Fri Oct 28 18:03:38 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.58"
[Fri Oct 28 18:03:39 2011] fullrun_ccd3_acisf05804_pi14-548_cl_pass1_src11.ximg exists
[Fri Oct 28 18:03:39 2011] fullrun_ccd3_acisf05804_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Oct 28 18:03:39 2011] Fit fullrun_ccd3_acisf05804_pi14-548_cl_pass1_src11 appears to have run properly
[Fri Oct 28 18:03:39 2011] fullrun_ccd3_acisf05804_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Oct 28 18:03:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05804_pi14-548_cl_pass1_tfrozen_src11.csv
[Fri Oct 28 18:03:39 2011] fullrun_ccd3_acisf05804_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Oct 28 18:03:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05804_pi14-548_cl_pass1_tfrozen_src11.csv
[Fri Oct 28 18:03:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05804_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05804_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 18:03:47 2011] Spatial fit model total counts = 13.479800, observed total counts = 14.000000
[Fri Oct 28 18:03:47 2011] Offset between fit and detection position for source 10 = 0.243136 pixels
[Fri Oct 28 18:03:47 2011] 13.777660 total counts/ 2.896460 bgd. counts: snr = 6.393564
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.243136 pixels
  Position = (383.9, 1087.0) = 13 55 57.25 -11 39 18.9
  Extent = 0.7 (0.5-1.2)" x 0.3 (0.2-0.4)", rotation angle = 86 (78-90) degrees
  Source counts = 10.9 +/- 3.7
  Background counts = 2.9
  Rate = 0.0005 +/- 0.0002
[Fri Oct 28 18:03:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 18:03:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 18:03:47 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 18:03:47 2011] Source does appear to be extended
[Fri Oct 28 18:03:47 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Fri Oct 28 18:08:38 2011] Not overwriting source region fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_src.reg
[Fri Oct 28 18:08:38 2011] Extracting stamp from image fullrun_ccd3_acisf05804_pi14-548_cl_sm2.00.img.gz, (353, 1056) - (415, 1118)
[Fri Oct 28 18:08:38 2011] Writing fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10.gif
[Fri Oct 28 18:09:58 2011] ../../acisf05804/products/events/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_src.evt and ../../acisf05804/products/events/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct 28 18:09:58 2011] Size of ../../acisf05804/products/events/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_src.evt.gz[events] = 12 counts
[Fri Oct 28 18:09:58 2011] Mean chipx,y = (616.75, 1004.42)
[Fri Oct 28 18:09:58 2011] Mean tdetx,y = (4127.58, 3677.75)
[Fri Oct 28 18:09:58 2011] chipx,y range = (597.00-631.00, 995.00-1017.00)
[Fri Oct 28 18:09:58 2011] Size of ../../acisf05804/products/events/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 4 counts
[Fri Oct 28 18:09:58 2011] ../../acisf05804/products/images/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_src.img and ../../acisf05804/products/images/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct 28 18:09:58 2011] Not generating rmf since there are only 10 counts
[Fri Oct 28 18:09:58 2011] arf not found, will run specextract
[Fri Oct 28 18:09:59 2011] ../../acisf05804/products/spectra/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_bkg.pi not found
[Fri Oct 28 18:09:59 2011] ../../acisf05804/products/spectra/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10.warf not found
[Fri Oct 28 18:09:59 2011] ../../acisf05804/products/spectra/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10.wrmf not found
[Fri Oct 28 18:09:59 2011] Removal of ../../acisf05804/products/spectra/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10.soff failed
[Fri Oct 28 18:10:00 2011] Failed to rename ../../acisf05804/products/spectra/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_grp.pi to ../../acisf05804/products/spectra/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_src.pi
[Fri Oct 28 18:10:06 2011] ../../acisf05804/products/lightcurves/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_src.lc and ../../acisf05804/products/lightcurves/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct 28 18:11:25 2011] No arf file found
[Fri Oct 28 18:11:29 2011] Updating aperture counts using extracted products
[Fri Oct 28 18:11:29 2011] Error reading totcts from fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_src.pi
[Fri Oct 28 18:11:29 2011] No arf file for this source, not re-computing flux
[Fri Oct 28 18:11:34 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 18:11:35 2011] acisf05804/analysis//spectral/fullrun_ccd3_acisf05804_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete