[Sat Oct  8 02:42:37 2011] Detection parameters:
  Position = (319.9, 588.8) = 16 51 2.46 5 4 1.9
  Extent = 0.8" x 0.5", rotation angle = 100 degrees
  Source counts = 175.3 +/- 13.4
  Background counts = 3.7
  Rate = 0.004 +/- 0.0003

[Sat Oct  8 02:42:39 2011] Off-axis axis estimate = 3.53'
[Sat Oct  8 02:43:56 2011] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:43:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 02:43:56 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Sat Oct  8 02:43:56 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.080
[Sat Oct  8 02:43:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.70"
[Sat Oct  8 02:43:57 2011] fullrun_ccd6_acisf05796_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  8 02:43:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05796_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 02:43:57 2011] fullrun_ccd6_acisf05796_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  8 02:43:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05796_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 02:43:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf05796_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf05796_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:43:57 2011] fullrun_ccd6_acisf05796_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  8 02:43:57 2011] fullrun_ccd6_acisf05796_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  8 02:43:57 2011] Fit fullrun_ccd6_acisf05796_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  8 02:44:09 2011] Spatial fit model total counts = 177.818000, observed total counts = 180.000000
[Sat Oct  8 02:44:09 2011] Offset between fit and detection position for source 2 = 0.785563 pixels
[Sat Oct  8 02:44:09 2011] 177.644900 total counts/ 6.514900 bgd. counts: snr = 67.045907
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.785563 pixels
  Position = (320.4, 589.4) = 16 51 2.46 5 4 1.9
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 171.1 +/- 13.3
  Background counts = 6.5
  Rate = 0.004 +/- 0.0003
[Sat Oct  8 02:44:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:44:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:44:09 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:44:09 2011] Source does appear to be extended
[Sat Oct  8 02:44:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:44:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 02:44:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 02:44:33 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Sat Oct  8 02:44:33 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.118
[Sat Oct  8 02:44:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.92"
[Sat Oct  8 02:44:34 2011] fullrun_ccd6_acisf05796_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  8 02:44:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05796_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 02:44:34 2011] fullrun_ccd6_acisf05796_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  8 02:44:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05796_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 02:44:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf05796_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf05796_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 02:44:34 2011] fullrun_ccd6_acisf05796_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  8 02:44:34 2011] fullrun_ccd6_acisf05796_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  8 02:44:34 2011] Fit fullrun_ccd6_acisf05796_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  8 02:44:44 2011] Spatial fit model total counts = 180.083000, observed total counts = 180.000000
[Sat Oct  8 02:44:44 2011] Offset between fit and detection position for source 2 = 0.018988 pixels
[Sat Oct  8 02:44:44 2011] 179.835650 total counts/ 7.280650 bgd. counts: snr = 63.950283
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.018988 pixels
  Position = (320.4, 589.4) = 16 51 2.46 5 4 1.9
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 172.6 +/- 13.4
  Background counts = 7.3
  Rate = 0.004 +/- 0.0003
[Sat Oct  8 02:44:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 02:44:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 02:44:44 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 02:44:44 2011] Source does appear to be extended
[Sat Oct  8 02:44:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 02:45:36 2011] Not overwriting source region fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_src.reg
[Sat Oct  8 02:45:36 2011] Extracting stamp from image fullrun_ccd6_acisf05796_pi14-548_cl_sm2.00.img.gz, (279, 548) - (362, 631)
[Sat Oct  8 02:45:36 2011] Writing fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2.gif
[Sat Oct  8 02:45:38 2011] ../../acisf05796/products/events/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_src.evt and ../../acisf05796/products/events/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct  8 02:45:38 2011] Size of ../../acisf05796/products/events/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_src.evt.gz[events] = 178 counts
[Sat Oct  8 02:45:38 2011] Mean chipx,y = (875.61, 728.44)
[Sat Oct  8 02:45:38 2011] Mean tdetx,y = (3750.61, 2430.44)
[Sat Oct  8 02:45:38 2011] chipx,y range = (857.00-897.00, 710.00-749.00)
[Sat Oct  8 02:45:38 2011] Size of ../../acisf05796/products/events/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 30 counts
[Sat Oct  8 02:45:38 2011] ../../acisf05796/products/images/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_src.img and ../../acisf05796/products/images/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct  8 02:45:38 2011] ../../acisf05796/products/spectra/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_src.pi and ../../acisf05796/products/spectra/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct  8 02:45:41 2011] ../../acisf05796/products/lightcurves/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_src.lc and ../../acisf05796/products/lightcurves/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct  8 02:46:54 2011] Keeping rmf generated by specextract
[Sat Oct  8 02:46:54 2011] 206.392
[Sat Oct  8 02:48:20 2011] Updating aperture counts using extracted products
[Sat Oct  8 02:48:20 2011] Error reading totcts from fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct  8 02:48:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 02:48:20 2011] Using photon index=1.80, rate=0.00363, arf fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2.arf
[Sat Oct  8 02:48:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 02:48:20 2011] Updating source flux to 3.7e-14
[Sat Oct  8 02:48:51 2011] Reading fit data from acisf05796/analysis//spectral/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_pl.csv
[Sat Oct  8 02:48:51 2011] Spectral fit parameter nH value = 2.26883e+21
[Sat Oct  8 02:48:51 2011] Spectral fit parameter PhoIndex value = 1.62394
[Sat Oct  8 02:48:51 2011] Failed to get F(0.3-8.0) from acisf05796/analysis//spectral/fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Oct  8 02:48:51 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 02:48:51 2011] Using Nh = 2.3e+21, photon index=1.62, rate=0.00363, arf fullrun_ccd6_acisf05796_pi14-548_pass1_cl_src2.arf
[Sat Oct  8 02:48:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 02:48:51 2011] Updating source flux to 4.2e-14