[Mon Oct  3 20:33:19 2011] Detection parameters:
  Position = (651.8, 357.6) = 9 13 25.92 30 4 49.3
  Extent = 0.9" x 0.6", rotation angle = 102 degrees
  Source counts = 498.8 +/- 22.4
  Background counts = 5.2
  Rate = 0.03 +/- 0.001

[Mon Oct  3 20:33:19 2011] Off-axis axis estimate = 3.95'
[Mon Oct  3 20:34:04 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 20:34:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 20:34:04 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Mon Oct  3 20:34:04 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.075
[Mon Oct  3 20:34:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.81"
[Mon Oct  3 20:34:04 2011] fullrun_ccd6_acisf05789_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 20:34:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05789_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 20:34:04 2011] fullrun_ccd6_acisf05789_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 20:34:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05789_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 20:34:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf05789_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf05789_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 20:34:05 2011] fullrun_ccd6_acisf05789_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 20:34:05 2011] fullrun_ccd6_acisf05789_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 20:34:05 2011] Fit fullrun_ccd6_acisf05789_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 20:34:11 2011] Spatial fit model total counts = 500.802000, observed total counts = 505.000000
[Mon Oct  3 20:34:11 2011] Offset between fit and detection position for source 13 = 0.703294 pixels
[Mon Oct  3 20:34:11 2011] 500.469200 total counts/ 12.764200 bgd. counts: snr = 136.508724
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.703294 pixels
  Position = (652.3, 358.1) = 9 13 25.92 30 4 49.3
  Extent = 1.1 (1.0-1.1)", rotation angle = 0
  Source counts = 487.7 +/- 22.4
  Background counts = 12.8
  Rate = 0.03 +/- 0.001
[Mon Oct  3 20:34:11 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 20:34:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 20:34:11 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 20:34:11 2011] Source does appear to be extended
[Mon Oct  3 20:34:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 20:34:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 20:34:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 20:34:29 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Mon Oct  3 20:34:29 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.067
[Mon Oct  3 20:34:29 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.06"
[Mon Oct  3 20:34:30 2011] fullrun_ccd6_acisf05789_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 20:34:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05789_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 20:34:30 2011] fullrun_ccd6_acisf05789_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 20:34:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05789_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 20:34:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf05789_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf05789_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 20:34:30 2011] fullrun_ccd6_acisf05789_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 20:34:30 2011] fullrun_ccd6_acisf05789_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 20:34:30 2011] Fit fullrun_ccd6_acisf05789_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 20:34:35 2011] Spatial fit model total counts = 503.364000, observed total counts = 505.000000
[Mon Oct  3 20:34:35 2011] Offset between fit and detection position for source 13 = 0.025276 pixels
[Mon Oct  3 20:34:35 2011] 503.397730 total counts/ 8.917730 bgd. counts: snr = 165.585221
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.025276 pixels
  Position = (652.3, 358.1) = 9 13 25.92 30 4 49.2
  Extent = 1.1 (1.0-1.1)", rotation angle = 0
  Source counts = 494.5 +/- 22.4
  Background counts = 8.9
  Rate = 0.03 +/- 0.001
[Mon Oct  3 20:34:35 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 20:34:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 20:34:35 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 20:34:35 2011] Source does appear to be extended
[Mon Oct  3 20:34:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 20:35:02 2011] Not overwriting source region fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_src.reg
[Mon Oct  3 20:35:02 2011] Extracting stamp from image fullrun_ccd6_acisf05789_pi14-548_cl_sm2.00.img.gz, (603, 309) - (701, 407)
[Mon Oct  3 20:35:02 2011] Writing fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13.gif
[Mon Oct  3 20:35:02 2011] ../../acisf05789/products/events/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_src.evt and ../../acisf05789/products/events/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Mon Oct  3 20:35:02 2011] Size of ../../acisf05789/products/events/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_src.evt.gz[events] = 503 counts
[Mon Oct  3 20:35:02 2011] Mean chipx,y = (784.02, 396.47)
[Mon Oct  3 20:35:02 2011] Mean tdetx,y = (3659.02, 2098.47)
[Mon Oct  3 20:35:02 2011] chipx,y range = (762.00-805.00, 376.00-417.00)
[Mon Oct  3 20:35:02 2011] Size of ../../acisf05789/products/events/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 23 counts
[Mon Oct  3 20:35:02 2011] ../../acisf05789/products/images/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_src.img and ../../acisf05789/products/images/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Mon Oct  3 20:35:02 2011] ../../acisf05789/products/spectra/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_src.pi and ../../acisf05789/products/spectra/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Mon Oct  3 20:35:06 2011] ../../acisf05789/products/lightcurves/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_src.lc and ../../acisf05789/products/lightcurves/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Mon Oct  3 20:35:26 2011] Keeping rmf generated by specextract
[Mon Oct  3 20:35:26 2011] 205.735
[Mon Oct  3 20:36:07 2011] Updating aperture counts using extracted products
[Mon Oct  3 20:36:07 2011] Error reading totcts from fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_src.pi.gz
[Mon Oct  3 20:36:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 20:36:07 2011] Using photon index=1.80, rate=0.0276, arf fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13.arf
[Mon Oct  3 20:36:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 20:36:07 2011] Updating source flux to 2.9e-13
[Mon Oct  3 20:36:14 2011] Reading fit data from acisf05789/analysis//spectral/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_pl.csv
[Mon Oct  3 20:36:14 2011] Spectral fit parameter nH value = 8.57855e+13
[Mon Oct  3 20:36:14 2011] Spectral fit parameter PhoIndex value = 1.98283
[Mon Oct  3 20:36:14 2011] Failed to get F(0.3-8.0) from acisf05789/analysis//spectral/fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 20:36:14 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 20:36:14 2011] Using Nh = 8.6e+13, photon index=1.98, rate=0.0276, arf fullrun_ccd6_acisf05789_pi14-548_pass1_cl_src13.arf
[Mon Oct  3 20:36:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 20:36:14 2011] Updating source flux to 2.8e-13