[Thu Sep 22 16:33:20 2011] Detection parameters:
  Position = (676.1, 1161.1) = 3 40 42.88 -28 29 58.6
  Extent = 1.4" x 1.0", rotation angle = 131 degrees
  Source counts = 165.1 +/- 13.0
  Background counts = 4.9
  Rate = 0.007 +/- 0.0005

[Thu Sep 22 16:33:21 2011] Off-axis axis estimate = 5.40'
[Thu Sep 22 16:34:26 2011] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 16:34:26 2011] Initial guess for spatial extent in simple fitting = 1.35"
[Thu Sep 22 16:34:26 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Thu Sep 22 16:34:26 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.35"
[Thu Sep 22 16:34:27 2011] fullrun_ccd0_acisf05780_pi14-548_cl_pass0_src2.ximg exists
[Thu Sep 22 16:34:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05780_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 16:34:27 2011] fullrun_ccd0_acisf05780_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Sep 22 16:34:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05780_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 16:34:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05780_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05780_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 16:34:28 2011] fullrun_ccd0_acisf05780_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep 22 16:34:28 2011] fullrun_ccd0_acisf05780_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep 22 16:34:28 2011] Fit fullrun_ccd0_acisf05780_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Sep 22 16:34:52 2011] Spatial fit model total counts = 172.324000, observed total counts = 171.000000
[Thu Sep 22 16:34:52 2011] Offset between fit and detection position for source 3 = 0.612296 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.612296 pixels
  Position = (676.6, 1161.5) = 3 40 42.88 -28 29 58.6
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 172.7 +/- 13.1
  Background counts = 0.0
  Rate = 0.007 +/- 0.0005
[Thu Sep 22 16:34:52 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 16:34:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 16:34:52 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 16:34:52 2011] Source does appear to be extended
[Thu Sep 22 16:34:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 16:35:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 16:35:33 2011] Initial guess for spatial extent in simple fitting = 1.63"
[Thu Sep 22 16:35:33 2011] source mask rpix=3.3, npix_max = 58, mask sum = 49, frac = 0.841
[Thu Sep 22 16:35:33 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.63"
[Thu Sep 22 16:35:34 2011] fullrun_ccd0_acisf05780_pi14-548_cl_pass1_src2.ximg exists
[Thu Sep 22 16:35:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05780_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 16:35:34 2011] fullrun_ccd0_acisf05780_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Sep 22 16:35:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05780_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 16:35:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05780_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05780_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 16:35:34 2011] fullrun_ccd0_acisf05780_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep 22 16:35:34 2011] fullrun_ccd0_acisf05780_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep 22 16:35:34 2011] Fit fullrun_ccd0_acisf05780_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Sep 22 16:35:55 2011] Spatial fit model total counts = 170.940000, observed total counts = 173.000000
[Thu Sep 22 16:35:55 2011] Offset between fit and detection position for source 3 = 0.052160 pixels
[Thu Sep 22 16:35:55 2011] 171.578698 total counts/ 0.131698 bgd. counts: snr = 472.433081
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.052160 pixels
  Position = (676.6, 1161.4) = 3 40 42.88 -28 29 58.7
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 171.4 +/- 13.1
  Background counts = 0.1
  Rate = 0.007 +/- 0.0005
[Thu Sep 22 16:35:55 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 16:35:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 16:35:55 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 16:35:55 2011] Source does appear to be extended
[Thu Sep 22 16:35:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 16:36:26 2011] Not overwriting source region fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 22 16:36:26 2011] Extracting stamp from image fullrun_ccd0_acisf05780_pi14-548_cl_sm2.00.img.gz, (601, 1086) - (752, 1237)
[Thu Sep 22 16:36:26 2011] Writing fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3.gif
[Thu Sep 22 16:36:29 2011] ../../acisf05780/products/events/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_src.evt and ../../acisf05780/products/events/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 22 16:36:29 2011] Size of ../../acisf05780/products/events/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_src.evt.gz[events] = 173 counts
[Thu Sep 22 16:36:29 2011] Mean chipx,y = (795.05, 891.61)
[Thu Sep 22 16:36:29 2011] Mean tdetx,y = (3952.61, 4336.95)
[Thu Sep 22 16:36:29 2011] chipx,y range = (770.00-820.00, 872.00-915.00)
[Thu Sep 22 16:36:30 2011] Size of ../../acisf05780/products/events/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 51 counts
[Thu Sep 22 16:36:30 2011] ../../acisf05780/products/images/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_src.img and ../../acisf05780/products/images/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 22 16:36:30 2011] ../../acisf05780/products/spectra/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_src.pi and ../../acisf05780/products/spectra/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 22 16:36:34 2011] ../../acisf05780/products/lightcurves/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_src.lc and ../../acisf05780/products/lightcurves/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 22 16:37:09 2011] Keeping rmf generated by specextract
[Thu Sep 22 16:37:09 2011] 188.336
[Thu Sep 22 16:40:32 2011] Updating aperture counts using extracted products
[Thu Sep 22 16:40:32 2011] Error reading totcts from fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 22 16:40:32 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 16:40:32 2011] Using photon index=1.80, rate=0.00694, arf fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 16:40:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 16:40:32 2011] Updating source flux to 8.4e-14
[Thu Sep 22 16:40:46 2011] Reading fit data from acisf05780/analysis//spectral/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_pl.csv
[Thu Sep 22 16:40:46 2011] Spectral fit parameter nH value = 2.47893e+15
[Thu Sep 22 16:40:46 2011] Spectral fit parameter PhoIndex value = 1.96748
[Thu Sep 22 16:40:46 2011] Failed to get F(0.3-8.0) from acisf05780/analysis//spectral/fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 16:40:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 16:40:46 2011] Using Nh = 2.5e+15, photon index=1.97, rate=0.00694, arf fullrun_ccd0_acisf05780_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 16:40:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 16:40:46 2011] Updating source flux to 8.3e-14