[Thu Sep 22 07:40:58 2011] Detection parameters:
  Position = (520.2, 1013.2) = 10 2 21.46 69 0 19.8
  Extent = 0.5" x 0.5", rotation angle = 173 degrees
  Source counts = 26.5 +/- 5.2
  Background counts = 0.5
  Rate = 0.001 +/- 0.0003

[Thu Sep 22 07:40:59 2011] Off-axis axis estimate = 3.32'
[Thu Sep 22 07:41:41 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 07:41:41 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Thu Sep 22 07:41:41 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.208
[Thu Sep 22 07:41:41 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.65"
[Thu Sep 22 07:41:41 2011] fullrun_ccd3_acisf05773_pi14-548_cl_pass0_src2.ximg exists
[Thu Sep 22 07:41:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05773_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 07:41:41 2011] fullrun_ccd3_acisf05773_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Sep 22 07:41:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05773_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 07:41:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05773_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05773_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 07:41:41 2011] fullrun_ccd3_acisf05773_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep 22 07:41:41 2011] fullrun_ccd3_acisf05773_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep 22 07:41:41 2011] Fit fullrun_ccd3_acisf05773_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Sep 22 07:41:49 2011] Spatial fit model total counts = 26.699700, observed total counts = 31.000000
[Thu Sep 22 07:41:49 2011] Offset between fit and detection position for source 1 = 0.649556 pixels
[Thu Sep 22 07:41:49 2011] 26.225933 total counts/ 0.015733 bgd. counts: snr = 208.962668
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.649556 pixels
  Position = (520.6, 1013.7) = 10 2 21.47 69 0 19.8
  Extent = 0.6" x 0.3", rotation angle = 0
  Source counts = 26.2 +/- 5.1
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu Sep 22 07:41:49 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 07:41:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 07:41:49 2011] Assessing source extent using major
[Thu Sep 22 07:41:49 2011] Source does appear to be extended
[Thu Sep 22 07:41:49 2011] Computing asymmetry using major and minor axis, asym = 2.20
[Thu Sep 22 07:41:49 2011] Source is asymmetric
[Thu Sep 22 07:42:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 07:42:10 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Thu Sep 22 07:42:10 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.191
[Thu Sep 22 07:42:10 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.43"
[Thu Sep 22 07:42:11 2011] fullrun_ccd3_acisf05773_pi14-548_cl_pass1_src2.ximg exists
[Thu Sep 22 07:42:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05773_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 07:42:11 2011] fullrun_ccd3_acisf05773_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Sep 22 07:42:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05773_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 07:42:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05773_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05773_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 07:42:11 2011] fullrun_ccd3_acisf05773_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep 22 07:42:11 2011] fullrun_ccd3_acisf05773_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep 22 07:42:11 2011] Fit fullrun_ccd3_acisf05773_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Sep 22 07:42:25 2011] Spatial fit model total counts = 30.638900, observed total counts = 31.000000
[Thu Sep 22 07:42:25 2011] Offset between fit and detection position for source 1 = 0.072967 pixels
[Thu Sep 22 07:42:25 2011] 30.603140 total counts/ 5.609340 bgd. counts: snr = 10.553011
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.072967 pixels
  Position = (520.7, 1013.6) = 10 2 21.47 69 0 19.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 25.0 +/- 5.5
  Background counts = 5.6
  Rate = 0.001 +/- 0.0003
[Thu Sep 22 07:42:25 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 07:42:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 07:42:25 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 07:42:25 2011] Source does appear to be extended
[Thu Sep 22 07:42:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 07:45:08 2011] Not overwriting source region fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 07:45:08 2011] Extracting stamp from image fullrun_ccd3_acisf05773_pi14-548_cl_sm2.00.img.gz, (503, 996) - (539, 1032)
[Thu Sep 22 07:45:08 2011] Writing fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 07:45:12 2011] ../../acisf05773/products/events/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_src.evt and ../../acisf05773/products/events/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 07:45:12 2011] Size of ../../acisf05773/products/events/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_src.evt.gz[events] = 26 counts
[Thu Sep 22 07:45:12 2011] Mean chipx,y = (856.46, 666.85)
[Thu Sep 22 07:45:12 2011] Mean tdetx,y = (4465.15, 3917.46)
[Thu Sep 22 07:45:12 2011] chipx,y range = (841.00-875.00, 650.00-682.00)
[Thu Sep 22 07:45:12 2011] Size of ../../acisf05773/products/events/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 5 counts
[Thu Sep 22 07:45:12 2011] ../../acisf05773/products/images/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_src.img and ../../acisf05773/products/images/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 07:45:12 2011] ../../acisf05773/products/spectra/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_src.pi and ../../acisf05773/products/spectra/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 07:45:12 2011] Not generating rmf since there are only 24 counts
[Thu Sep 22 07:45:20 2011] ../../acisf05773/products/lightcurves/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_src.lc and ../../acisf05773/products/lightcurves/fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 07:46:28 2011] 200.392
[Thu Sep 22 07:46:35 2011] Updating aperture counts using extracted products
[Thu Sep 22 07:46:35 2011] Error reading totcts from fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 07:46:35 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 07:46:35 2011] Using photon index=1.80, rate=0.00126, arf fullrun_ccd3_acisf05773_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 07:46:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 07:46:35 2011] Updating source flux to 1.4e-14
[Thu Sep 22 07:46:48 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting