[Sun Sep 25 16:56:46 2011] Detection parameters: Position = (170.6, 324.0) = 12 30 47.70 12 23 34.5 Extent = 0.6" x 0.5", rotation angle = 113 degrees Source counts = 19.4 +/- 7.9 Background counts = 43.6 Rate = 0.004 +/- 0.002 [Sun Sep 25 16:56:46 2011] Off-axis axis estimate = 0.82' [Sun Sep 25 16:57:00 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting [Sun Sep 25 16:57:00 2011] Initial guess for spatial extent in simple fitting = 0.38" [Sun Sep 25 16:57:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.922 [Sun Sep 25 16:57:00 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.38" [Sun Sep 25 16:57:00 2011] fullrun_ccd7_acisf05743_pi14-548_cl_pass0_src4.ximg exists [Sun Sep 25 16:57:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05743_pi14-548_cl_pass0_src4.csv [Sun Sep 25 16:57:00 2011] fullrun_ccd7_acisf05743_pi14-548_cl_pass0_src4_1.ximg exists [Sun Sep 25 16:57:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05743_pi14-548_cl_pass0_src4.csv [Sun Sep 25 16:57:00 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf05743_pi14-548_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf05743_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Sep 25 16:57:00 2011] fullrun_ccd7_acisf05743_pi14-548_cl_pass0_tfrozen_src4.ximg exists [Sun Sep 25 16:57:00 2011] fullrun_ccd7_acisf05743_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists [Sun Sep 25 16:57:00 2011] Fit fullrun_ccd7_acisf05743_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly [Sun Sep 25 16:57:02 2011] Spatial fit model total counts = 363.943000, observed total counts = 364.000000 [Sun Sep 25 16:57:02 2011] Offset between fit and detection position for source 4 = 1.180504 pixels [Sun Sep 25 16:57:02 2011] 349.657200 total counts/ 325.386000 bgd. counts: snr = 1.345525 Spatial fit parameters: Offset between fit and detection position for source 4 = 1.180504 pixels Position = (171.1, 325.0) = 12 30 47.70 12 23 34.8 Extent = 0.5 (0.4-0.8)", rotation angle = 0 Source counts = 24.3 +/- 18.7 Background counts = 325.4 Rate = 0.005 +/- 0.004 Deleting source due to low Poisson probability