[Fri Oct  7 07:25:13 2011] Detection parameters:
  Position = (185.1, 370.5) = 2 8 40.88 10 55 33.3
  Extent = 2.1" x 1.5", rotation angle = 174 degrees
  Source counts = 545.2 +/- 24.2
  Background counts = 40.8
  Rate = 0.01 +/- 0.0006

[Fri Oct  7 07:25:13 2011] Off-axis axis estimate = 6.86'
[Fri Oct  7 07:26:01 2011] Using EEF radius (= 2.10 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 07:26:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 07:26:01 2011] Initial guess for spatial extent in simple fitting = 2.10"
[Fri Oct  7 07:26:01 2011] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.993
[Fri Oct  7 07:26:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.10"
[Fri Oct  7 07:26:02 2011] fullrun_ccd7_acisf05691_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 07:26:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05691_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 07:26:02 2011] fullrun_ccd7_acisf05691_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 07:26:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05691_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 07:26:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05691_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05691_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 07:26:02 2011] fullrun_ccd7_acisf05691_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 07:26:02 2011] fullrun_ccd7_acisf05691_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 07:26:02 2011] Fit fullrun_ccd7_acisf05691_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 07:26:14 2011] Spatial fit model total counts = 598.884000, observed total counts = 593.000000
[Fri Oct  7 07:26:14 2011] Offset between fit and detection position for source 34 = 0.773506 pixels
[Fri Oct  7 07:26:14 2011] 598.973600 total counts/ 33.004600 bgd. counts: snr = 98.515691
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.773506 pixels
  Position = (185.7, 371.0) = 2 8 40.87 10 55 33.2
  Extent = 2.4 (2.2-2.5)", rotation angle = 0
  Source counts = 566.0 +/- 24.5
  Background counts = 33.0
  Rate = 0.01 +/- 0.0006
[Fri Oct  7 07:26:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 07:26:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 07:26:14 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 07:26:14 2011] Source does appear to be extended
[Fri Oct  7 07:26:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 07:26:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 07:26:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 07:26:34 2011] Initial guess for spatial extent in simple fitting = 2.37"
[Fri Oct  7 07:26:34 2011] source mask rpix=4.8, npix_max = 113, mask sum = 110, frac = 0.970
[Fri Oct  7 07:26:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.37"
[Fri Oct  7 07:26:34 2011] fullrun_ccd7_acisf05691_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 07:26:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05691_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 07:26:34 2011] fullrun_ccd7_acisf05691_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 07:26:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05691_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 07:26:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05691_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05691_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 07:26:35 2011] fullrun_ccd7_acisf05691_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 07:26:35 2011] fullrun_ccd7_acisf05691_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 07:26:35 2011] Fit fullrun_ccd7_acisf05691_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 07:26:52 2011] Spatial fit model total counts = 611.990000, observed total counts = 612.000000
[Fri Oct  7 07:26:52 2011] Offset between fit and detection position for source 34 = 0.050270 pixels
[Fri Oct  7 07:26:52 2011] 611.781300 total counts/ 60.631300 bgd. counts: snr = 70.781762
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.050270 pixels
  Position = (185.6, 371.0) = 2 8 40.87 10 55 33.3
  Extent = 2.3 (2.2-2.5)", rotation angle = 0
  Source counts = 551.1 +/- 24.7
  Background counts = 60.6
  Rate = 0.01 +/- 0.0006
[Fri Oct  7 07:26:52 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 07:26:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 07:26:52 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 07:26:52 2011] Source does appear to be extended
[Fri Oct  7 07:26:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 07:28:52 2011] Not overwriting source region fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_src.reg
[Fri Oct  7 07:28:52 2011] Extracting stamp from image fullrun_ccd7_acisf05691_pi14-548_cl_sm2.00.img.gz, (79, 264) - (292, 478)
[Fri Oct  7 07:28:52 2011] Writing fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34.gif
[Fri Oct  7 07:28:59 2011] ../../acisf05691/products/events/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_src.evt and ../../acisf05691/products/events/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_bgd.evt exist, delete to re-create
[Fri Oct  7 07:28:59 2011] Size of ../../acisf05691/products/events/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_src.evt.gz[events] = 590 counts
[Fri Oct  7 07:28:59 2011] Mean chipx,y = (961.22, 869.61)
[Fri Oct  7 07:28:59 2011] Mean tdetx,y = (4878.22, 2571.61)
[Fri Oct  7 07:28:59 2011] chipx,y range = (925.00-987.00, 836.00-898.00)
[Fri Oct  7 07:28:59 2011] Size of ../../acisf05691/products/events/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 321 counts
[Fri Oct  7 07:28:59 2011] ../../acisf05691/products/images/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_src.img and ../../acisf05691/products/images/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_bgd.img exist, delete to re-create
[Fri Oct  7 07:28:59 2011] ../../acisf05691/products/spectra/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_src.pi and ../../acisf05691/products/spectra/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_bgd.pi exist, delete to re-create
[Fri Oct  7 07:29:02 2011] ../../acisf05691/products/lightcurves/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_src.lc and ../../acisf05691/products/lightcurves/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_bgd.lc exist, delete to re-create
[Fri Oct  7 07:30:51 2011] Keeping rmf generated by specextract
[Fri Oct  7 07:30:53 2011] 195.171
[Fri Oct  7 07:30:58 2011] Updating aperture counts using extracted products
[Fri Oct  7 07:30:58 2011] Error reading totcts from fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_src.pi.gz
[Fri Oct  7 07:30:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:30:58 2011] Using photon index=1.80, rate=0.0139, arf fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34.arf
[Fri Oct  7 07:30:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 07:30:58 2011] Updating source flux to 1.2e-13
[Fri Oct  7 07:31:33 2011] Reading fit data from acisf05691/analysis//spectral/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_pl.csv
[Fri Oct  7 07:31:33 2011] Spectral fit parameter nH value = 6.88162e+20
[Fri Oct  7 07:31:33 2011] Spectral fit parameter PhoIndex value = 1.85967
[Fri Oct  7 07:31:33 2011] Failed to get F(0.3-8.0) from acisf05691/analysis//spectral/fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 07:31:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:31:33 2011] Using Nh = 6.9e+20, photon index=1.86, rate=0.0139, arf fullrun_ccd7_acisf05691_pi14-548_pass1_cl_src34.arf
[Fri Oct  7 07:31:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 07:31:33 2011] Updating source flux to 1.1e-13