[Thu Sep 29 10:26:16 2011] Detection parameters:
  Position = (348.8, 709.5) = 2 36 44.78 59 40 14.2
  Extent = 0.6" x 0.5", rotation angle = 21 degrees
  Source counts = 50.7 +/- 7.3
  Background counts = 3.3
  Rate = 0.0009 +/- 0.0001

[Thu Sep 29 10:26:19 2011] Off-axis axis estimate = 1.49'
[Thu Sep 29 10:27:39 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:27:39 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Sep 29 10:27:39 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.892
[Thu Sep 29 10:27:39 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 0.39"
[Thu Sep 29 10:27:44 2011] fullrun_ccd7_acisf05619_pi14-548_cl_pass0_src38.ximg exists
[Thu Sep 29 10:27:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05619_pi14-548_cl_pass0_src38.csv
[Thu Sep 29 10:27:44 2011] fullrun_ccd7_acisf05619_pi14-548_cl_pass0_src38_1.ximg exists
[Thu Sep 29 10:27:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05619_pi14-548_cl_pass0_src38.csv
[Thu Sep 29 10:27:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05619_pi14-548_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05619_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:27:51 2011] fullrun_ccd7_acisf05619_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Thu Sep 29 10:27:51 2011] fullrun_ccd7_acisf05619_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Thu Sep 29 10:27:51 2011] Fit fullrun_ccd7_acisf05619_pi14-548_cl_pass0_tfrozen_src38 appears to have run properly
[Thu Sep 29 10:28:24 2011] Source 80 is offset by 3.002665 and 2.706522 pixels which is larger than
2 X fitted extent = 0.398500 x 0.398500, not incorporating fit results
[Thu Sep 29 10:28:24 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:28:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:28:24 2011] Assessing source extent using major
[Thu Sep 29 10:28:24 2011] Source does appear to be extended
[Thu Sep 29 10:28:24 2011] Computing asymmetry using major and minor axis, asym = 1.20
[Thu Sep 29 10:28:49 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:28:49 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Sep 29 10:28:49 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.892
[Thu Sep 29 10:28:49 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 0.39"
[Thu Sep 29 10:28:53 2011] fullrun_ccd7_acisf05619_pi14-548_cl_pass1_src38.ximg exists
[Thu Sep 29 10:28:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05619_pi14-548_cl_pass1_src38.csv
[Thu Sep 29 10:28:53 2011] fullrun_ccd7_acisf05619_pi14-548_cl_pass1_src38_1.ximg exists
[Thu Sep 29 10:28:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05619_pi14-548_cl_pass1_src38.csv
[Thu Sep 29 10:28:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05619_pi14-548_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05619_pi14-548_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:28:56 2011] fullrun_ccd7_acisf05619_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Thu Sep 29 10:28:56 2011] fullrun_ccd7_acisf05619_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Thu Sep 29 10:28:56 2011] Fit fullrun_ccd7_acisf05619_pi14-548_cl_pass1_tfrozen_src38 appears to have run properly
[Thu Sep 29 10:29:23 2011] Spatial fit model total counts = 67.797700, observed total counts = 72.000000
[Thu Sep 29 10:29:23 2011] Offset between fit and detection position for source 80 = 0.522516 pixels
[Thu Sep 29 10:29:23 2011] 71.551200 total counts/ 29.229900 bgd. counts: snr = 7.827901
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.522516 pixels
  Position = (349.1, 710.0) = 2 36 44.79 59 40 14.2
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 42.3 +/- 8.5
  Background counts = 29.2
  Rate = 0.0008 +/- 0.0002
[Thu Sep 29 10:29:23 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:29:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:29:23 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:29:23 2011] Source does appear to be extended
[Thu Sep 29 10:29:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:31:49 2011] Not overwriting source region fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_src.reg
[Thu Sep 29 10:31:49 2011] Extracting stamp from image fullrun_ccd7_acisf05619_pi14-548_cl_sm2.00.img.gz, (332, 693) - (366, 727)
[Thu Sep 29 10:31:49 2011] Writing fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80.gif
[Thu Sep 29 10:33:39 2011] ../../acisf05619/products/events/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_src.evt and ../../acisf05619/products/events/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_bgd.evt exist, delete to re-create
[Thu Sep 29 10:33:39 2011] Size of ../../acisf05619/products/events/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_src.evt.gz[events] = 46 counts
[Thu Sep 29 10:33:39 2011] Mean chipx,y = (206.85, 324.52)
[Thu Sep 29 10:33:39 2011] Mean tdetx,y = (4123.85, 2026.52)
[Thu Sep 29 10:33:39 2011] chipx,y range = (190.00-224.00, 307.00-341.00)
[Thu Sep 29 10:33:39 2011] Size of ../../acisf05619/products/events/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_bgd.evt.gz[events] = 6 counts
[Thu Sep 29 10:33:39 2011] ../../acisf05619/products/images/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_src.img and ../../acisf05619/products/images/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_bgd.img exist, delete to re-create
[Thu Sep 29 10:33:39 2011] ../../acisf05619/products/spectra/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_src.pi and ../../acisf05619/products/spectra/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_bgd.pi exist, delete to re-create
[Thu Sep 29 10:33:39 2011] Not generating rmf since there are only 42 counts
[Thu Sep 29 10:33:42 2011] ../../acisf05619/products/lightcurves/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_src.lc and ../../acisf05619/products/lightcurves/fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_bgd.lc exist, delete to re-create
[Thu Sep 29 10:38:16 2011] 238.08
[Thu Sep 29 10:38:24 2011] Updating aperture counts using extracted products
[Thu Sep 29 10:38:24 2011] Error reading totcts from fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80_src.pi.gz
[Thu Sep 29 10:38:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 10:38:25 2011] Using photon index=1.80, rate=0.000769, arf fullrun_ccd7_acisf05619_pi14-548_pass1_cl_src80.arf
[Thu Sep 29 10:38:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 10:38:25 2011] Updating source flux to 8.1e-15
[Thu Sep 29 10:39:10 2011] Flag b found in src. 80 procflags, skipping spectral fitting
[Thu Sep 29 10:39:10 2011] Source 80 has fewer than 100.000000 counts, skipping spectral fitting