[Thu Sep 29 10:26:05 2011] Detection parameters:
  Position = (906.5, 1096.9) = 2 37 6.48 59 39 5.4
  Extent = 0.8" x 0.5", rotation angle = 41 degrees
  Source counts = 231.8 +/- 15.4
  Background counts = 4.2
  Rate = 0.004 +/- 0.0003

[Thu Sep 29 10:26:07 2011] Off-axis axis estimate = 3.49'
[Thu Sep 29 10:27:35 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:27:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 10:27:35 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Thu Sep 29 10:27:35 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.828
[Thu Sep 29 10:27:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.69"
[Thu Sep 29 10:27:36 2011] fullrun_ccd6_acisf05619_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 10:27:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05619_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 10:27:36 2011] fullrun_ccd6_acisf05619_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 10:27:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05619_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 10:27:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf05619_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf05619_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:27:36 2011] fullrun_ccd6_acisf05619_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 10:27:36 2011] fullrun_ccd6_acisf05619_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 10:27:36 2011] Fit fullrun_ccd6_acisf05619_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 10:28:11 2011] Spatial fit model total counts = 233.308000, observed total counts = 236.000000
[Thu Sep 29 10:28:11 2011] Offset between fit and detection position for source 3 = 0.695909 pixels
[Thu Sep 29 10:28:11 2011] 234.950400 total counts/ 13.878400 bgd. counts: snr = 59.342254
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.695909 pixels
  Position = (907.0, 1097.4) = 2 37 6.48 59 39 5.4
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 221.1 +/- 15.3
  Background counts = 13.9
  Rate = 0.004 +/- 0.0003
[Thu Sep 29 10:28:11 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:28:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:28:11 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:28:11 2011] Source does appear to be extended
[Thu Sep 29 10:28:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:28:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:28:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 10:28:48 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Thu Sep 29 10:28:48 2011] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.909
[Thu Sep 29 10:28:48 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.91"
[Thu Sep 29 10:28:48 2011] fullrun_ccd6_acisf05619_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 10:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05619_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 10:28:48 2011] fullrun_ccd6_acisf05619_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 10:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05619_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 10:28:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf05619_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf05619_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:28:49 2011] fullrun_ccd6_acisf05619_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 10:28:49 2011] fullrun_ccd6_acisf05619_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 10:28:49 2011] Fit fullrun_ccd6_acisf05619_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 10:29:08 2011] Spatial fit model total counts = 236.000000, observed total counts = 236.000000
[Thu Sep 29 10:29:08 2011] Offset between fit and detection position for source 3 = 0.034751 pixels
[Thu Sep 29 10:29:08 2011] 236.477800 total counts/ 15.383800 bgd. counts: snr = 56.369625
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.034751 pixels
  Position = (907.0, 1097.4) = 2 37 6.48 59 39 5.4
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 221.1 +/- 15.4
  Background counts = 15.4
  Rate = 0.004 +/- 0.0003
[Thu Sep 29 10:29:08 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:29:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:29:08 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:29:08 2011] Source does appear to be extended
[Thu Sep 29 10:29:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:30:36 2011] Not overwriting source region fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 29 10:30:36 2011] Extracting stamp from image fullrun_ccd6_acisf05619_pi14-548_cl_sm2.00.img.gz, (866, 1057) - (948, 1138)
[Thu Sep 29 10:30:36 2011] Writing fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3.gif
[Thu Sep 29 10:30:37 2011] ../../acisf05619/products/events/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_src.evt and ../../acisf05619/products/events/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 29 10:30:37 2011] Size of ../../acisf05619/products/events/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_src.evt.gz[events] = 229 counts
[Thu Sep 29 10:30:37 2011] Mean chipx,y = (892.41, 275.91)
[Thu Sep 29 10:30:37 2011] Mean tdetx,y = (3767.41, 1977.91)
[Thu Sep 29 10:30:37 2011] chipx,y range = (872.00-913.00, 257.00-293.00)
[Thu Sep 29 10:30:37 2011] Size of ../../acisf05619/products/events/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 32 counts
[Thu Sep 29 10:30:37 2011] ../../acisf05619/products/images/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_src.img and ../../acisf05619/products/images/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 29 10:30:37 2011] ../../acisf05619/products/spectra/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_src.pi and ../../acisf05619/products/spectra/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 29 10:30:40 2011] ../../acisf05619/products/lightcurves/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_src.lc and ../../acisf05619/products/lightcurves/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 29 10:31:47 2011] Keeping rmf generated by specextract
[Thu Sep 29 10:31:47 2011] 207.47
[Thu Sep 29 10:38:23 2011] Updating aperture counts using extracted products
[Thu Sep 29 10:38:23 2011] Error reading totcts from fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 29 10:38:23 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 10:38:23 2011] Using photon index=1.80, rate=0.00402, arf fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3.arf
[Thu Sep 29 10:38:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 10:38:23 2011] Updating source flux to 5.1e-14
[Thu Sep 29 10:39:10 2011] Reading fit data from acisf05619/analysis//spectral/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_pl.csv
[Thu Sep 29 10:39:10 2011] Spectral fit parameter nH value = 1.66294e+22
[Thu Sep 29 10:39:10 2011] Spectral fit parameter PhoIndex value = 2.06603
[Thu Sep 29 10:39:10 2011] Failed to get F(0.3-8.0) from acisf05619/analysis//spectral/fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 10:39:10 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 10:39:10 2011] Using Nh = 1.7e+22, photon index=2.07, rate=0.00402, arf fullrun_ccd6_acisf05619_pi14-548_pass1_cl_src3.arf
[Thu Sep 29 10:39:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 10:39:10 2011] Updating source flux to 6e-14