[Mon Oct 31 22:13:50 2011] Detection parameters: Position = (804.5, 961.5) = 17 13 40.53 -39 52 13.4 Extent = 0.5" x 0.5", rotation angle = 31 degrees Source counts = 1794.7 +/- 42.5 Background counts = 10.3 Rate = 0.2 +/- 0.004 [Mon Oct 31 22:13:51 2011] Off-axis axis estimate = 3.31' [Mon Oct 31 22:14:46 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting [Mon Oct 31 22:14:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Oct 31 22:14:46 2011] Initial guess for spatial extent in simple fitting = 0.65" [Mon Oct 31 22:14:46 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.682 [Mon Oct 31 22:14:46 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.65" [Mon Oct 31 22:14:46 2011] fullrun_ccd1_acisf05559_pi14-548_cl_pass0_src1.ximg exists [Mon Oct 31 22:14:46 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf05559_pi14-548_cl_pass0_src1.csv [Mon Oct 31 22:14:46 2011] fullrun_ccd1_acisf05559_pi14-548_cl_pass0_src1_1.ximg exists [Mon Oct 31 22:14:46 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf05559_pi14-548_cl_pass0_src1.csv [Mon Oct 31 22:14:46 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf05559_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf05559_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Oct 31 22:14:46 2011] fullrun_ccd1_acisf05559_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Mon Oct 31 22:14:46 2011] fullrun_ccd1_acisf05559_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Mon Oct 31 22:14:46 2011] Fit fullrun_ccd1_acisf05559_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Mon Oct 31 22:14:50 2011] Spatial fit model total counts = 1835.220000, observed total counts = 1869.000000 [Mon Oct 31 22:14:50 2011] Offset between fit and detection position for source 1 = 0.648859 pixels [Mon Oct 31 22:14:50 2011] 1837.914300 total counts/ 76.294300 bgd. counts: snr = 201.681557 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.648859 pixels Position = (805.0, 961.9) = 17 13 40.54 -39 52 13.4 Extent = 0.6 (0.6-0.6)", rotation angle = 0 Source counts = 1761.6 +/- 42.9 Background counts = 76.3 Rate = 0.2 +/- 0.004 [Mon Oct 31 22:14:50 2011] Vigneting correction estimate = 1.000000 [Mon Oct 31 22:14:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Oct 31 22:14:50 2011] Assessing source extent using major axis lower bound [Mon Oct 31 22:14:50 2011] Source does appear to be extended [Mon Oct 31 22:14:50 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Oct 31 22:15:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Oct 31 22:15:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Oct 31 22:15:07 2011] Initial guess for spatial extent in simple fitting = 0.59" [Mon Oct 31 22:15:07 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.389 [Mon Oct 31 22:15:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.59" [Mon Oct 31 22:15:07 2011] fullrun_ccd1_acisf05559_pi14-548_cl_pass1_src1.ximg exists [Mon Oct 31 22:15:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05559_pi14-548_cl_pass1_src1.csv [Mon Oct 31 22:15:07 2011] fullrun_ccd1_acisf05559_pi14-548_cl_pass1_src1_1.ximg exists [Mon Oct 31 22:15:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05559_pi14-548_cl_pass1_src1.csv [Mon Oct 31 22:15:07 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf05559_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf05559_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Oct 31 22:15:07 2011] fullrun_ccd1_acisf05559_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Mon Oct 31 22:15:07 2011] fullrun_ccd1_acisf05559_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Mon Oct 31 22:15:07 2011] Fit fullrun_ccd1_acisf05559_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Mon Oct 31 22:15:12 2011] Spatial fit model total counts = 1830.980000, observed total counts = 1871.000000 [Mon Oct 31 22:15:12 2011] Offset between fit and detection position for source 1 = 0.004000 pixels [Mon Oct 31 22:15:12 2011] 1831.015600 total counts/ 74.885600 bgd. counts: snr = 202.935257 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.004000 pixels Position = (805.0, 961.9) = 17 13 40.54 -39 52 13.4 Extent = 0.6 (0.6-0.6)", rotation angle = 0 Source counts = 1756.1 +/- 42.8 Background counts = 74.9 Rate = 0.2 +/- 0.004 [Mon Oct 31 22:15:12 2011] Vigneting correction estimate = 1.000000 [Mon Oct 31 22:15:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Oct 31 22:15:12 2011] Assessing source extent using major axis lower bound [Mon Oct 31 22:15:12 2011] Source does appear to be extended [Mon Oct 31 22:15:12 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Oct 31 22:15:45 2011] Not overwriting source region fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_src.reg [Mon Oct 31 22:15:45 2011] Extracting stamp from image fullrun_ccd1_acisf05559_pi14-548_cl_sm2.00.img.gz, (778, 935) - (832, 989) [Mon Oct 31 22:15:45 2011] Writing fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1.gif [Mon Oct 31 22:15:46 2011] ../../acisf05559/products/events/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_src.evt and ../../acisf05559/products/events/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Mon Oct 31 22:15:46 2011] Size of ../../acisf05559/products/events/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1811 counts [Mon Oct 31 22:15:46 2011] Mean chipx,y = (252.02, 785.01) [Mon Oct 31 22:15:46 2011] Mean tdetx,y = (4346.99, 4359.02) [Mon Oct 31 22:15:46 2011] chipx,y range = (233.00-273.00, 766.00-805.00) [Mon Oct 31 22:15:46 2011] Size of ../../acisf05559/products/events/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 53 counts [Mon Oct 31 22:15:46 2011] ../../acisf05559/products/images/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_src.img and ../../acisf05559/products/images/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Mon Oct 31 22:15:46 2011] ../../acisf05559/products/spectra/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_src.pi and ../../acisf05559/products/spectra/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Mon Oct 31 22:15:49 2011] ../../acisf05559/products/lightcurves/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_src.lc and ../../acisf05559/products/lightcurves/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Mon Oct 31 22:16:03 2011] Keeping rmf generated by specextract [Mon Oct 31 22:16:03 2011] 197.819 [Mon Oct 31 22:16:20 2011] Updating aperture counts using extracted products [Mon Oct 31 22:16:20 2011] Error reading totcts from fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_src.pi.gz [Mon Oct 31 22:16:20 2011] Calculating source flux in energy range 0.30-8.00 [Mon Oct 31 22:16:20 2011] Using photon index=1.80, rate=0.182, arf fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1.arf [Mon Oct 31 22:16:20 2011] Assuming count rate is from the 0.20-8.00 bandpass [Mon Oct 31 22:16:20 2011] Updating source flux to 2.9e-12 [Mon Oct 31 22:16:26 2011] Reading fit data from acisf05559/analysis//spectral/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_pl.csv [Mon Oct 31 22:16:26 2011] Spectral fit parameter nH value = 1.16044e+21 [Mon Oct 31 22:16:26 2011] Spectral fit parameter PhoIndex value = 2.56639 [Mon Oct 31 22:16:26 2011] Failed to get F(0.3-8.0) from acisf05559/analysis//spectral/fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Mon Oct 31 22:16:26 2011] Calculating source flux in energy range 0.30-8.00 [Mon Oct 31 22:16:26 2011] Using Nh = 1.2e+21, photon index=2.57, rate=0.182, arf fullrun_ccd1_acisf05559_pi14-548_pass1_cl_src1.arf [Mon Oct 31 22:16:26 2011] Assuming count rate is from the 0.20-8.00 bandpass [Mon Oct 31 22:16:26 2011] Updating source flux to 1.7e-12