[Sun Sep 25 23:06:21 2011] Detection parameters:
  Position = (562.8, 109.6) = 5 38 39.77 28 16 40.6
  Extent = 0.8" x 0.5", rotation angle = 93 degrees
  Source counts = 53.1 +/- 7.5
  Background counts = 2.9
  Rate = 0.001 +/- 0.0001

[Sun Sep 25 23:06:21 2011] Off-axis axis estimate = 3.40'
[Sun Sep 25 23:06:30 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:06:30 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sun Sep 25 23:06:30 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.871
[Sun Sep 25 23:06:30 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.67"
[Sun Sep 25 23:06:30 2011] fullrun_ccd3_acisf05538_pi14-548_cl_pass0_src5.ximg exists
[Sun Sep 25 23:06:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05538_pi14-548_cl_pass0_src5.csv
[Sun Sep 25 23:06:30 2011] fullrun_ccd3_acisf05538_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Sep 25 23:06:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05538_pi14-548_cl_pass0_src5.csv
[Sun Sep 25 23:06:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05538_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05538_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:06:30 2011] fullrun_ccd3_acisf05538_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Sep 25 23:06:30 2011] fullrun_ccd3_acisf05538_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Sep 25 23:06:30 2011] Fit fullrun_ccd3_acisf05538_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Sep 25 23:06:33 2011] Spatial fit model total counts = 61.465700, observed total counts = 60.000000
[Sun Sep 25 23:06:33 2011] Offset between fit and detection position for source 5 = 1.032672 pixels
[Sun Sep 25 23:06:33 2011] 62.326100 total counts/ 10.150200 bgd. counts: snr = 16.376936
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.032672 pixels
  Position = (563.3, 110.5) = 5 38 39.77 28 16 40.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 52.2 +/- 7.9
  Background counts = 10.2
  Rate = 0.0009 +/- 0.0001
[Sun Sep 25 23:06:33 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 23:06:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 23:06:33 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 23:06:33 2011] Source does appear to be extended
[Sun Sep 25 23:06:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 23:06:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:06:38 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sun Sep 25 23:06:38 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.959
[Sun Sep 25 23:06:38 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.62"
[Sun Sep 25 23:06:39 2011] fullrun_ccd3_acisf05538_pi14-548_cl_pass1_src4.ximg exists
[Sun Sep 25 23:06:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05538_pi14-548_cl_pass1_src4.csv
[Sun Sep 25 23:06:39 2011] fullrun_ccd3_acisf05538_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Sep 25 23:06:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05538_pi14-548_cl_pass1_src4.csv
[Sun Sep 25 23:06:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05538_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05538_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:06:39 2011] fullrun_ccd3_acisf05538_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Sep 25 23:06:39 2011] fullrun_ccd3_acisf05538_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Sep 25 23:06:39 2011] Fit fullrun_ccd3_acisf05538_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Sep 25 23:06:40 2011] Spatial fit model total counts = 58.968900, observed total counts = 60.000000
[Sun Sep 25 23:06:40 2011] Offset between fit and detection position for source 5 = 0.003865 pixels
[Sun Sep 25 23:06:40 2011] 59.722400 total counts/ 9.575200 bgd. counts: snr = 16.205885
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.003865 pixels
  Position = (563.3, 110.5) = 5 38 39.77 28 16 40.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 50.1 +/- 7.7
  Background counts = 9.6
  Rate = 0.0009 +/- 0.0001
[Sun Sep 25 23:06:40 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 23:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 23:06:40 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 23:06:40 2011] Source does appear to be extended
[Sun Sep 25 23:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 23:06:42 2011] Not overwriting source region fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_src.reg
[Sun Sep 25 23:06:42 2011] Extracting stamp from image fullrun_ccd3_acisf05538_pi14-548_cl_sm2.00.img.gz, (535, 82) - (592, 139)
[Sun Sep 25 23:06:42 2011] Writing fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5.gif
[Sun Sep 25 23:06:51 2011] ../../acisf05538/products/events/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_src.evt and ../../acisf05538/products/events/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Sep 25 23:06:51 2011] Size of ../../acisf05538/products/events/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_src.evt.gz[events] = 53 counts
[Sun Sep 25 23:06:51 2011] Mean chipx,y = (549.32, 974.30)
[Sun Sep 25 23:06:51 2011] Mean tdetx,y = (4157.70, 3610.32)
[Sun Sep 25 23:06:51 2011] chipx,y range = (534.00-566.00, 956.00-994.00)
[Sun Sep 25 23:06:51 2011] Size of ../../acisf05538/products/events/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 30 counts
[Sun Sep 25 23:06:51 2011] ../../acisf05538/products/images/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_src.img and ../../acisf05538/products/images/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Sep 25 23:06:51 2011] ../../acisf05538/products/spectra/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_src.pi and ../../acisf05538/products/spectra/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Sep 25 23:06:51 2011] Not generating rmf since there are only 50 counts
[Sun Sep 25 23:06:54 2011] ../../acisf05538/products/lightcurves/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_src.lc and ../../acisf05538/products/lightcurves/fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Sep 25 23:06:56 2011] 191.018
[Sun Sep 25 23:06:57 2011] Updating aperture counts using extracted products
[Sun Sep 25 23:06:57 2011] Error reading totcts from fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Sep 25 23:06:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 23:06:57 2011] Using photon index=1.80, rate=0.000902, arf fullrun_ccd3_acisf05538_pi14-548_pass1_cl_src5.arf
[Sun Sep 25 23:06:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 23:06:57 2011] Updating source flux to 1.2e-14
[Sun Sep 25 23:06:57 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting