[Sun Feb 12 14:35:30 2012] Detection parameters:
  Position = (927.2, 503.6) = 15 13 13.54 -59 3 40.1
  Extent = 0.8" x 0.6", rotation angle = 121 degrees
  Source counts = 302.2 +/- 22.1
  Background counts = 184.8
  Rate = 0.007 +/- 0.0005

[Sun Feb 12 14:35:35 2012] Off-axis axis estimate = 6.98'
[Sun Feb 12 15:37:36 2012] Using EEF radius (= 2.17 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 15:37:36 2012] Initial guess for spatial extent in simple fitting = 2.17"
[Sun Feb 12 15:37:36 2012] source mask rpix=4.4, npix_max = 96, mask sum = 90, frac = 0.932
[Sun Feb 12 15:37:36 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 2.17"
[Sun Feb 12 17:56:47 2012] fullrun_ccd2_acisf05535_pi14-548_cl_pass0_src17.ximg exists
[Sun Feb 12 17:56:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05535_pi14-548_cl_pass0_src17.csv
[Sun Feb 12 17:56:47 2012] fullrun_ccd2_acisf05535_pi14-548_cl_pass0_src17_1.ximg exists
[Sun Feb 12 17:56:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05535_pi14-548_cl_pass0_src17.csv
[Sun Feb 12 17:56:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05535_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05535_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 17:56:47 2012] fullrun_ccd2_acisf05535_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sun Feb 12 17:56:47 2012] fullrun_ccd2_acisf05535_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Feb 12 17:56:47 2012] Fit fullrun_ccd2_acisf05535_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Feb 12 18:48:55 2012] Spatial fit model total counts = 1164.170000, observed total counts = 1162.000000
[Sun Feb 12 18:48:55 2012] Offset between fit and detection position for source 12 = 6.009787 pixels
[Sun Feb 12 18:48:55 2012] Warning, changing simple spatial fit ID from 17 to 6
[Sun Feb 12 18:48:55 2012] 1163.800049 total counts/ 1163.800000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 6.009787 pixels
  Position = (933.2, 502.8) = 15 13 13.20 -59 3 40.7
  Extent = 4.4 (0.5-8.2)", rotation angle = 0
  Source counts = 0.0 +/- 34.1
  Background counts = 1163.8
  Rate = 1e-09 +/- 0.0008
  Deleting source due to low Poisson probability