[Sun Feb 12 14:35:27 2012] Detection parameters:
  Position = (1004.5, 512.6) = 15 14 2.75 -59 13 25.5
  Extent = 0.9" x 0.7", rotation angle = 24 degrees
  Source counts = 15.3 +/- 4.6
  Background counts = 5.7
  Rate = 0.0004 +/- 0.0001

[Sun Feb 12 14:35:28 2012] Off-axis axis estimate = 5.57'
[Sun Feb 12 15:11:09 2012] Using EEF radius (= 1.42 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 15:11:09 2012] Initial guess for spatial extent in simple fitting = 1.42"
[Sun Feb 12 15:11:09 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.065
[Sun Feb 12 15:11:09 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 1.42"
[Sun Feb 12 15:37:36 2012] fullrun_ccd1_acisf05535_pi14-548_cl_pass0_src16.ximg exists
[Sun Feb 12 15:37:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05535_pi14-548_cl_pass0_src16.csv
[Sun Feb 12 15:37:36 2012] fullrun_ccd1_acisf05535_pi14-548_cl_pass0_src16_1.ximg exists
[Sun Feb 12 15:37:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05535_pi14-548_cl_pass0_src16.csv
[Sun Feb 12 15:37:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05535_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05535_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 15:37:36 2012] fullrun_ccd1_acisf05535_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Sun Feb 12 15:37:36 2012] fullrun_ccd1_acisf05535_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Feb 12 15:37:36 2012] Fit fullrun_ccd1_acisf05535_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Feb 12 18:48:44 2012] Spatial fit model total counts = 40.000000, observed total counts = 40.000000
[Sun Feb 12 18:48:44 2012] Offset between fit and detection position for source 11 = 0.700376 pixels
[Sun Feb 12 18:48:44 2012] 39.752400 total counts/ 25.608500 bgd. counts: snr = 2.794970
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.700376 pixels
  Position = (1004.8, 513.2) = 15 14 2.76 -59 13 25.5
  Extent = 0.9 (0.4-1.7)", rotation angle = 0
  Source counts = 14.1 +/- 6.3
  Background counts = 25.6
  Rate = 0.0003 +/- 0.0001
[Sun Feb 12 18:48:44 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 18:48:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 18:48:44 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 18:48:44 2012] Source does appear to be extended
[Sun Feb 12 18:48:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:14:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 19:14:16 2012] Initial guess for spatial extent in simple fitting = 0.94"
[Sun Feb 12 19:14:16 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.073
[Sun Feb 12 19:14:16 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 0.94"
[Sun Feb 12 19:39:56 2012] fullrun_ccd1_acisf05535_pi14-548_cl_pass1_src15.ximg exists
[Sun Feb 12 19:39:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05535_pi14-548_cl_pass1_src15.csv
[Sun Feb 12 19:39:56 2012] fullrun_ccd1_acisf05535_pi14-548_cl_pass1_src15_1.ximg exists
[Sun Feb 12 19:39:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05535_pi14-548_cl_pass1_src15.csv
[Sun Feb 12 19:39:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05535_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05535_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:39:56 2012] fullrun_ccd1_acisf05535_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sun Feb 12 19:39:56 2012] fullrun_ccd1_acisf05535_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Feb 12 19:39:56 2012] Fit fullrun_ccd1_acisf05535_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Feb 12 22:55:18 2012] Spatial fit model total counts = 32.137000, observed total counts = 33.000000
[Sun Feb 12 22:55:18 2012] Offset between fit and detection position for source 11 = 0.169141 pixels
[Sun Feb 12 22:55:18 2012] 32.699300 total counts/ 18.092500 bgd. counts: snr = 3.434043
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.169141 pixels
  Position = (1004.6, 513.2) = 15 14 2.77 -59 13 25.5
  Extent = 1.0 (0.2-1.7)", rotation angle = 0
  Source counts = 14.6 +/- 5.7
  Background counts = 18.1
  Rate = 0.0003 +/- 0.0001
[Sun Feb 12 22:55:18 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 22:55:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 22:55:18 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 22:55:18 2012] Source does appear to be extended
[Sun Feb 12 22:55:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 22:58:42 2012] Writing source region out to fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11_src.reg
[Sun Feb 12 22:58:42 2012] Extracting stamp from image fullrun_ccd1_acisf05535_pi14-548_cl_sm2.00.img.gz, (960, 469) - (1049, 557)
[Sun Feb 12 22:58:42 2012] Writing fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11.gif
[Sun Feb 12 23:01:21 2012] Size of ../../acisf05535/products/events/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11_src.evt.gz[events] = 31 counts
[Sun Feb 12 23:01:21 2012] Mean chipx,y = (124.52, 357.26)
[Sun Feb 12 23:01:21 2012] Mean tdetx,y = (4774.74, 4231.52)
[Sun Feb 12 23:01:21 2012] chipx,y range = (105.00-144.00, 341.00-379.00)
[Sun Feb 12 23:01:21 2012] Size of ../../acisf05535/products/events/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 159 counts
[Sun Feb 12 23:01:22 2012] Not generating rmf since there are only 14 counts
[Sun Feb 12 23:01:22 2012] arf not found, will run specextract
[Sun Feb 12 23:01:23 2012] ../../acisf05535/products/spectra/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11_bkg.pi not found
[Sun Feb 12 23:01:23 2012] ../../acisf05535/products/spectra/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11.warf not found
[Sun Feb 12 23:01:23 2012] ../../acisf05535/products/spectra/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11.wrmf not found
[Sun Feb 12 23:01:23 2012] Removal of ../../acisf05535/products/spectra/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11.soff failed
[Sun Feb 12 23:01:23 2012] Failed to rename ../../acisf05535/products/spectra/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11_grp.pi to ../../acisf05535/products/spectra/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11_src.pi
[Sun Feb 12 23:03:00 2012] No arf file found
[Sun Feb 12 23:14:25 2012] Updating aperture counts using extracted products
[Sun Feb 12 23:14:25 2012] Error reading totcts from fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11_src.pi
[Sun Feb 12 23:14:25 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 23:14:32 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 23:14:33 2012] acisf05535/analysis//spectral/fullrun_ccd1_acisf05535_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete