[Sun Feb 12 14:35:24 2012] Detection parameters:
  Position = (713.3, 423.1) = 15 14 33.07 -59 5 45.0
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 19.1 +/- 4.6
  Background counts = 1.9
  Rate = 0.0004 +/- 0.0001

[Sun Feb 12 14:35:25 2012] Off-axis axis estimate = 5.14'
[Sun Feb 12 14:41:23 2012] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:41:23 2012] Initial guess for spatial extent in simple fitting = 1.24"
[Sun Feb 12 14:41:23 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Sun Feb 12 14:41:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 1.24"
[Sun Feb 12 15:11:08 2012] fullrun_ccd0_acisf05535_pi14-548_cl_pass0_src3.ximg exists
[Sun Feb 12 15:11:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05535_pi14-548_cl_pass0_src3.csv
[Sun Feb 12 15:11:08 2012] fullrun_ccd0_acisf05535_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Feb 12 15:11:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05535_pi14-548_cl_pass0_src3.csv
[Sun Feb 12 15:11:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05535_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05535_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 15:11:08 2012] fullrun_ccd0_acisf05535_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 12 15:11:08 2012] fullrun_ccd0_acisf05535_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 12 15:11:08 2012] Fit fullrun_ccd0_acisf05535_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb 12 18:48:41 2012] Spatial fit model total counts = 30.997600, observed total counts = 31.000000
[Sun Feb 12 18:48:41 2012] Offset between fit and detection position for source 4 = 0.732459 pixels
[Sun Feb 12 18:48:41 2012] 30.624200 total counts/ 15.978700 bgd. counts: snr = 3.663815
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.732459 pixels
  Position = (713.7, 423.7) = 15 14 33.07 -59 5 44.9
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 14.6 +/- 5.5
  Background counts = 16.0
  Rate = 0.0003 +/- 0.0001
[Sun Feb 12 18:48:41 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 18:48:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 18:48:41 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 18:48:41 2012] Source does appear to be extended
[Sun Feb 12 18:48:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 18:49:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 18:49:22 2012] Initial guess for spatial extent in simple fitting = 0.57"
[Sun Feb 12 18:49:22 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.827
[Sun Feb 12 18:49:22 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.57"
[Sun Feb 12 19:14:15 2012] fullrun_ccd0_acisf05535_pi14-548_cl_pass1_src3.ximg exists
[Sun Feb 12 19:14:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05535_pi14-548_cl_pass1_src3.csv
[Sun Feb 12 19:14:15 2012] fullrun_ccd0_acisf05535_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Feb 12 19:14:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05535_pi14-548_cl_pass1_src3.csv
[Sun Feb 12 19:14:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05535_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05535_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:14:15 2012] fullrun_ccd0_acisf05535_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Feb 12 19:14:15 2012] fullrun_ccd0_acisf05535_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Feb 12 19:14:15 2012] Fit fullrun_ccd0_acisf05535_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Feb 12 22:55:15 2012] Spatial fit model total counts = 29.499600, observed total counts = 30.000000
[Sun Feb 12 22:55:15 2012] Offset between fit and detection position for source 4 = 0.195565 pixels
[Sun Feb 12 22:55:15 2012] 28.386300 total counts/ 13.330100 bgd. counts: snr = 4.123810
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.195565 pixels
  Position = (713.7, 423.8) = 15 14 33.07 -59 5 44.8
  Extent = 0.6 (0.4-1.2)", rotation angle = 0
  Source counts = 15.1 +/- 5.3
  Background counts = 13.3
  Rate = 0.0004 +/- 0.0001
[Sun Feb 12 22:55:15 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 22:55:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 22:55:15 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 22:55:15 2012] Source does appear to be extended
[Sun Feb 12 22:55:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 22:55:48 2012] Writing source region out to fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4_src.reg
[Sun Feb 12 22:55:48 2012] Extracting stamp from image fullrun_ccd0_acisf05535_pi14-548_cl_sm2.00.img.gz, (685, 395) - (743, 453)
[Sun Feb 12 22:55:48 2012] Writing fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4.gif
[Sun Feb 12 22:56:12 2012] Size of ../../acisf05535/products/events/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4_src.evt.gz[events] = 21 counts
[Sun Feb 12 22:56:12 2012] Mean chipx,y = (590.05, 706.19)
[Sun Feb 12 22:56:12 2012] Mean tdetx,y = (3767.19, 4541.95)
[Sun Feb 12 22:56:12 2012] chipx,y range = (573.00-611.00, 688.00-722.00)
[Sun Feb 12 22:56:12 2012] Size of ../../acisf05535/products/events/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 25 counts
[Sun Feb 12 22:56:14 2012] Not generating rmf since there are only 15 counts
[Sun Feb 12 22:56:14 2012] arf not found, will run specextract
[Sun Feb 12 22:56:15 2012] ../../acisf05535/products/spectra/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4_bkg.pi not found
[Sun Feb 12 22:56:15 2012] ../../acisf05535/products/spectra/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4.warf not found
[Sun Feb 12 22:56:15 2012] ../../acisf05535/products/spectra/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4.wrmf not found
[Sun Feb 12 22:56:15 2012] Removal of ../../acisf05535/products/spectra/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4.soff failed
[Sun Feb 12 22:56:15 2012] Failed to rename ../../acisf05535/products/spectra/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4_grp.pi to ../../acisf05535/products/spectra/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4_src.pi
[Sun Feb 12 22:58:41 2012] No arf file found
[Sun Feb 12 23:14:25 2012] Updating aperture counts using extracted products
[Sun Feb 12 23:14:25 2012] Error reading totcts from fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4_src.pi
[Sun Feb 12 23:14:25 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 23:14:31 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 23:14:32 2012] acisf05535/analysis//spectral/fullrun_ccd0_acisf05535_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete