[Sun Sep 25 18:06:56 2011] Detection parameters:
  Position = (418.8, 1100.4) = 7 38 10.92 -30 34 52.1
  Extent = 0.8" x 0.5", rotation angle = 119 degrees
  Source counts = 25.0 +/- 6.8
  Background counts = 21.0
  Rate = 0.0003 +/- 9e-05

[Sun Sep 25 18:06:56 2011] Off-axis axis estimate = 6.46'
[Sun Sep 25 18:08:30 2011] Using EEF radius (= 1.87 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 18:08:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 18:08:30 2011] Initial guess for spatial extent in simple fitting = 1.87"
[Sun Sep 25 18:08:30 2011] source mask rpix=3.8, npix_max = 73, mask sum = 81, frac = 1.095
[Sun Sep 25 18:08:30 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 1.87"
[Sun Sep 25 18:08:33 2011] fullrun_ccd7_acisf05501_pi14-548_cl_pass0_src15.ximg exists
[Sun Sep 25 18:08:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05501_pi14-548_cl_pass0_src15.csv
[Sun Sep 25 18:08:33 2011] fullrun_ccd7_acisf05501_pi14-548_cl_pass0_src15_1.ximg exists
[Sun Sep 25 18:08:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05501_pi14-548_cl_pass0_src15.csv
[Sun Sep 25 18:08:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05501_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05501_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 18:08:33 2011] fullrun_ccd7_acisf05501_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sun Sep 25 18:08:33 2011] fullrun_ccd7_acisf05501_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Sep 25 18:08:33 2011] Fit fullrun_ccd7_acisf05501_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Sep 25 18:08:55 2011] Spatial fit model total counts = 62.000000, observed total counts = 62.000000
[Sun Sep 25 18:08:55 2011] Offset between fit and detection position for source 31 = 4.042883 pixels
[Sun Sep 25 18:08:55 2011] 62.695500 total counts/ 33.612300 bgd. counts: snr = 5.016411
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 4.042883 pixels
  Position = (421.2, 1103.7) = 7 38 10.85 -30 34 50.7
  Extent = 2.0 (0.7-3.7)", rotation angle = 0
  Source counts = 29.1 +/- 7.9
  Background counts = 33.6
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 18:08:55 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 18:08:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 18:08:55 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 18:08:55 2011] Source does appear to be extended
[Sun Sep 25 18:08:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 18:09:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 18:09:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 18:09:21 2011] Initial guess for spatial extent in simple fitting = 1.96"
[Sun Sep 25 18:09:21 2011] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.006
[Sun Sep 25 18:09:21 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 1.96"
[Sun Sep 25 18:09:24 2011] fullrun_ccd7_acisf05501_pi14-548_cl_pass1_src15.ximg exists
[Sun Sep 25 18:09:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05501_pi14-548_cl_pass1_src15.csv
[Sun Sep 25 18:09:24 2011] fullrun_ccd7_acisf05501_pi14-548_cl_pass1_src15_1.ximg exists
[Sun Sep 25 18:09:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05501_pi14-548_cl_pass1_src15.csv
[Sun Sep 25 18:09:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05501_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05501_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 18:09:24 2011] fullrun_ccd7_acisf05501_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sun Sep 25 18:09:24 2011] fullrun_ccd7_acisf05501_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Sep 25 18:09:24 2011] Fit fullrun_ccd7_acisf05501_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Sep 25 18:09:35 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 21.364246 pixels away
[Sun Sep 25 18:09:35 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 18:09:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 18:09:35 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 18:09:35 2011] Source does appear to be extended
[Sun Sep 25 18:09:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 18:11:47 2011] Not overwriting source region fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_src.reg
[Sun Sep 25 18:11:47 2011] Extracting stamp from image fullrun_ccd7_acisf05501_pi14-548_cl_sm2.00.img.gz, (331, 1014) - (511, 1193)
[Sun Sep 25 18:11:47 2011] Writing fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31.gif
[Sun Sep 25 18:12:36 2011] ../../acisf05501/products/events/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_src.evt and ../../acisf05501/products/events/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Sun Sep 25 18:12:36 2011] Size of ../../acisf05501/products/events/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_src.evt.gz[events] = 84 counts
[Sun Sep 25 18:12:36 2011] Mean chipx,y = (984.14, 608.71)
[Sun Sep 25 18:12:36 2011] Mean tdetx,y = (4901.14, 2310.71)
[Sun Sep 25 18:12:36 2011] chipx,y range = (956.00-1015.00, 579.00-636.00)
[Sun Sep 25 18:12:36 2011] Size of ../../acisf05501/products/events/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 535 counts
[Sun Sep 25 18:12:36 2011] ../../acisf05501/products/images/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_src.img and ../../acisf05501/products/images/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Sun Sep 25 18:12:36 2011] ../../acisf05501/products/spectra/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_src.pi and ../../acisf05501/products/spectra/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Sun Sep 25 18:12:36 2011] Not generating rmf since there are only 29 counts
[Sun Sep 25 18:12:40 2011] ../../acisf05501/products/lightcurves/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_src.lc and ../../acisf05501/products/lightcurves/fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sun Sep 25 18:13:37 2011] 199.939
[Sun Sep 25 18:13:41 2011] Updating aperture counts using extracted products
[Sun Sep 25 18:13:41 2011] Error reading totcts from fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31_src.pi.gz
[Sun Sep 25 18:13:41 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 18:13:41 2011] Using photon index=1.80, rate=0.000369, arf fullrun_ccd7_acisf05501_pi14-548_pass1_cl_src31.arf
[Sun Sep 25 18:13:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 18:13:41 2011] Updating source flux to 3.8e-15
[Sun Sep 25 18:14:07 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting