[Sun Feb 19 03:09:35 2012] Detection parameters:
  Position = (1158.6, 720.6) = 1 2 6.81 -71 33 54.1
  Extent = 2.3" x 0.8", rotation angle = 110 degrees
  Source counts = 12.3 +/- 4.1
  Background counts = 4.7
  Rate = 0.001 +/- 0.0004

[Sun Feb 19 03:09:36 2012] Off-axis axis estimate = 2.55'
[Sun Feb 19 03:28:12 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 03:28:12 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Sun Feb 19 03:28:12 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.977
[Sun Feb 19 03:28:12 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.50"
[Sun Feb 19 03:37:50 2012] fullrun_ccd3_acisf05481_pi14-548_cl_pass0_src7.ximg exists
[Sun Feb 19 03:37:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05481_pi14-548_cl_pass0_src7.csv
[Sun Feb 19 03:37:50 2012] fullrun_ccd3_acisf05481_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Feb 19 03:37:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05481_pi14-548_cl_pass0_src7.csv
[Sun Feb 19 03:37:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05481_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05481_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 03:37:50 2012] fullrun_ccd3_acisf05481_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Feb 19 03:37:50 2012] fullrun_ccd3_acisf05481_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Feb 19 03:37:50 2012] Fit fullrun_ccd3_acisf05481_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Feb 19 03:46:34 2012] Spatial fit model total counts = 16.075600, observed total counts = 15.000000
[Sun Feb 19 03:46:34 2012] Offset between fit and detection position for source 8 = 1.367649 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.367649 pixels
  Position = (1159.9, 720.7) = 1 2 6.72 -71 33 54.3
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 16.1 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sun Feb 19 03:46:34 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 03:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 03:46:34 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 03:46:34 2012] Source does appear to be extended
[Sun Feb 19 03:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 04:01:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 04:01:23 2012] Initial guess for spatial extent in simple fitting = 0.67"
[Sun Feb 19 04:01:23 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.166
[Sun Feb 19 04:01:23 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.67"
[Sun Feb 19 04:13:22 2012] fullrun_ccd3_acisf05481_pi14-548_cl_pass1_src7.ximg exists
[Sun Feb 19 04:13:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05481_pi14-548_cl_pass1_src7.csv
[Sun Feb 19 04:13:22 2012] fullrun_ccd3_acisf05481_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Feb 19 04:13:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05481_pi14-548_cl_pass1_src7.csv
[Sun Feb 19 04:13:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05481_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05481_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 04:13:22 2012] fullrun_ccd3_acisf05481_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Feb 19 04:13:22 2012] fullrun_ccd3_acisf05481_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Feb 19 04:13:22 2012] Fit fullrun_ccd3_acisf05481_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Feb 19 04:21:30 2012] Spatial fit model total counts = 14.991800, observed total counts = 15.000000
[Sun Feb 19 04:21:30 2012] Offset between fit and detection position for source 8 = 0.073801 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.073801 pixels
  Position = (1159.9, 720.7) = 1 2 6.72 -71 33 54.3
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sun Feb 19 04:21:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 04:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 04:21:30 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 04:21:30 2012] Source does appear to be extended
[Sun Feb 19 04:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 04:24:59 2012] Writing source region out to fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8_src.reg
[Sun Feb 19 04:24:59 2012] Extracting stamp from image fullrun_ccd3_acisf05481_pi14-548_cl_sm2.00.img.gz, (1128, 689) - (1192, 752)
[Sun Feb 19 04:24:59 2012] Writing fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8.gif
[Sun Feb 19 04:26:04 2012] Size of ../../acisf05481/products/events/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8_src.evt.gz[events] = 15 counts
[Sun Feb 19 04:26:04 2012] Mean chipx,y = (954.33, 699.60)
[Sun Feb 19 04:26:04 2012] Mean tdetx,y = (4432.40, 4015.33)
[Sun Feb 19 04:26:04 2012] chipx,y range = (938.00-971.00, 686.00-718.00)
[Sun Feb 19 04:26:04 2012] Size of ../../acisf05481/products/events/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 1 counts
[Sun Feb 19 04:26:05 2012] Not generating rmf since there are only 14 counts
[Sun Feb 19 04:26:05 2012] arf not found, will run specextract
[Sun Feb 19 04:26:07 2012] ../../acisf05481/products/spectra/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8_bkg.pi not found
[Sun Feb 19 04:26:07 2012] ../../acisf05481/products/spectra/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8.warf not found
[Sun Feb 19 04:26:07 2012] ../../acisf05481/products/spectra/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8.wrmf not found
[Sun Feb 19 04:26:07 2012] Removal of ../../acisf05481/products/spectra/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8.soff failed
[Sun Feb 19 04:26:07 2012] Failed to rename ../../acisf05481/products/spectra/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8_grp.pi to ../../acisf05481/products/spectra/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8_src.pi
[Sun Feb 19 04:27:39 2012] No arf file found
[Sun Feb 19 04:27:53 2012] Updating aperture counts using extracted products
[Sun Feb 19 04:27:53 2012] Error reading totcts from fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8_src.pi
[Sun Feb 19 04:27:53 2012] No arf file for this source, not re-computing flux
[Sun Feb 19 04:27:58 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 19 04:27:59 2012] acisf05481/analysis//spectral/fullrun_ccd3_acisf05481_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete