[Sun Feb 19 03:09:33 2012] Detection parameters:
  Position = (660.6, 764.8) = 1 2 6.69 -71 41 15.8
  Extent = 1.3" x 0.8", rotation angle = 137 degrees
  Source counts = 390.1 +/- 20.3
  Background counts = 20.9
  Rate = 0.04 +/- 0.002

[Sun Feb 19 03:09:33 2012] Off-axis axis estimate = 5.27'
[Sun Feb 19 03:22:10 2012] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 03:22:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 03:22:10 2012] Initial guess for spatial extent in simple fitting = 1.29"
[Sun Feb 19 03:22:10 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.076
[Sun Feb 19 03:22:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.29"
[Sun Feb 19 03:28:12 2012] fullrun_ccd2_acisf05481_pi14-548_cl_pass0_src1.ximg exists
[Sun Feb 19 03:28:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05481_pi14-548_cl_pass0_src1.csv
[Sun Feb 19 03:28:12 2012] fullrun_ccd2_acisf05481_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Feb 19 03:28:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05481_pi14-548_cl_pass0_src1.csv
[Sun Feb 19 03:28:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05481_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05481_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 03:28:12 2012] fullrun_ccd2_acisf05481_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 19 03:28:12 2012] fullrun_ccd2_acisf05481_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 19 03:28:12 2012] Fit fullrun_ccd2_acisf05481_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 19 03:46:33 2012] Spatial fit model total counts = 389.569000, observed total counts = 392.000000
[Sun Feb 19 03:46:33 2012] Offset between fit and detection position for source 5 = 0.532346 pixels
[Sun Feb 19 03:46:33 2012] 392.937000 total counts/ 46.875000 bgd. counts: snr = 50.545590
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.532346 pixels
  Position = (661.0, 765.2) = 1 2 6.70 -71 41 15.9
  Extent = 1.2 (1.1-1.3)", rotation angle = 0
  Source counts = 346.1 +/- 19.8
  Background counts = 46.9
  Rate = 0.04 +/- 0.002
[Sun Feb 19 03:46:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 03:46:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 03:46:33 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 03:46:33 2012] Source does appear to be extended
[Sun Feb 19 03:46:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 03:56:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 03:56:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 03:56:57 2012] Initial guess for spatial extent in simple fitting = 1.18"
[Sun Feb 19 03:56:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.076
[Sun Feb 19 03:56:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.18"
[Sun Feb 19 04:01:23 2012] fullrun_ccd2_acisf05481_pi14-548_cl_pass1_src1.ximg exists
[Sun Feb 19 04:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05481_pi14-548_cl_pass1_src1.csv
[Sun Feb 19 04:01:23 2012] fullrun_ccd2_acisf05481_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Feb 19 04:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05481_pi14-548_cl_pass1_src1.csv
[Sun Feb 19 04:01:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05481_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05481_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 04:01:23 2012] fullrun_ccd2_acisf05481_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 04:01:23 2012] fullrun_ccd2_acisf05481_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 04:01:23 2012] Fit fullrun_ccd2_acisf05481_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 19 04:21:29 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Sun Feb 19 04:21:29 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 04:21:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 04:21:29 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 04:21:29 2012] Source does appear to be extended
[Sun Feb 19 04:21:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 04:24:17 2012] Writing source region out to fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5_src.reg
[Sun Feb 19 04:24:17 2012] Extracting stamp from image fullrun_ccd2_acisf05481_pi14-548_cl_sm2.00.img.gz, (607, 711) - (715, 819)
[Sun Feb 19 04:24:17 2012] Writing fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5.gif
[Sun Feb 19 04:24:19 2012] Size of ../../acisf05481/products/events/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5_src.evt.gz[events] = 385 counts
[Sun Feb 19 04:24:19 2012] Mean chipx,y = (491.30, 575.51)
[Sun Feb 19 04:24:19 2012] Mean tdetx,y = (3636.51, 3594.70)
[Sun Feb 19 04:24:19 2012] chipx,y range = (471.00-516.00, 554.00-597.00)
[Sun Feb 19 04:24:19 2012] Size of ../../acisf05481/products/events/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 17 counts
[Sun Feb 19 04:24:20 2012] rmf not found, will run specextract
[Sun Feb 19 04:24:20 2012] arf not found, will run specextract
[Sun Feb 19 04:24:22 2012] ../../acisf05481/products/spectra/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5_bkg.pi not found
[Sun Feb 19 04:24:22 2012] ../../acisf05481/products/spectra/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5.warf not found
[Sun Feb 19 04:24:22 2012] ../../acisf05481/products/spectra/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5.wrmf not found
[Sun Feb 19 04:24:22 2012] Removal of ../../acisf05481/products/spectra/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5.soff failed
[Sun Feb 19 04:24:22 2012] Failed to rename ../../acisf05481/products/spectra/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5_grp.pi to ../../acisf05481/products/spectra/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5_src.pi
[Sun Feb 19 04:24:59 2012] No arf file found
[Sun Feb 19 04:27:52 2012] Updating aperture counts using extracted products
[Sun Feb 19 04:27:52 2012] Error reading totcts from fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5_src.pi
[Sun Feb 19 04:27:53 2012] No arf file for this source, not re-computing flux
[Sun Feb 19 04:27:57 2012] Source 5 has no response, skipping
[Sun Feb 19 04:27:58 2012] acisf05481/analysis//spectral/fullrun_ccd2_acisf05481_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete