[Thu Sep 22 17:39:45 2011] Detection parameters:
  Position = (584.3, 755.7) = 17 34 12.71 -26 5 48.3
  Extent = 0.5" x 0.5", rotation angle = 52 degrees
  Source counts = 153.7 +/- 12.5
  Background counts = 2.3
  Rate = 0.004 +/- 0.0003

[Thu Sep 22 17:39:56 2011] Off-axis axis estimate = 1.11'
[Thu Sep 22 17:41:12 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 17:41:12 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 22 17:41:12 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.387
[Thu Sep 22 17:41:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Thu Sep 22 17:41:18 2011] fullrun_ccd7_acisf05468_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 17:41:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05468_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 17:41:18 2011] fullrun_ccd7_acisf05468_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 17:41:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05468_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 17:41:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05468_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05468_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 17:41:20 2011] fullrun_ccd7_acisf05468_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 17:41:20 2011] fullrun_ccd7_acisf05468_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 17:41:20 2011] Fit fullrun_ccd7_acisf05468_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 17:41:33 2011] Spatial fit model total counts = 160.955000, observed total counts = 161.000000
[Thu Sep 22 17:41:33 2011] Offset between fit and detection position for source 2 = 0.732951 pixels
[Thu Sep 22 17:41:33 2011] 160.891010 total counts/ 7.584010 bgd. counts: snr = 55.668887
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.732951 pixels
  Position = (584.8, 756.2) = 17 34 12.71 -26 5 48.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 153.3 +/- 12.7
  Background counts = 7.6
  Rate = 0.004 +/- 0.0003
[Thu Sep 22 17:41:33 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 17:41:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 17:41:33 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 17:41:33 2011] Source does appear to be extended
[Thu Sep 22 17:41:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 17:41:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 17:41:59 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Sep 22 17:41:59 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.867
[Thu Sep 22 17:41:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.40"
[Thu Sep 22 17:42:08 2011] fullrun_ccd7_acisf05468_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 17:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05468_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 17:42:08 2011] fullrun_ccd7_acisf05468_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 17:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05468_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 17:42:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05468_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05468_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 17:42:09 2011] fullrun_ccd7_acisf05468_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 17:42:09 2011] fullrun_ccd7_acisf05468_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 17:42:09 2011] Fit fullrun_ccd7_acisf05468_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 17:42:21 2011] Spatial fit model total counts = 159.961000, observed total counts = 160.000000
[Thu Sep 22 17:42:21 2011] Offset between fit and detection position for source 2 = 0.001725 pixels
[Thu Sep 22 17:42:21 2011] 159.708940 total counts/ 6.413940 bgd. counts: snr = 60.529285
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001725 pixels
  Position = (584.8, 756.2) = 17 34 12.71 -26 5 48.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 153.3 +/- 12.6
  Background counts = 6.4
  Rate = 0.004 +/- 0.0003
[Thu Sep 22 17:42:21 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 17:42:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 17:42:21 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 17:42:21 2011] Source does appear to be extended
[Thu Sep 22 17:42:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 17:44:20 2011] Not overwriting source region fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_src.reg
[Thu Sep 22 17:44:20 2011] Extracting stamp from image fullrun_ccd7_acisf05468_pi14-548_cl_sm2.00.img.gz, (567, 738) - (603, 774)
[Thu Sep 22 17:44:20 2011] Writing fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2.gif
[Thu Sep 22 17:44:22 2011] ../../acisf05468/products/events/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_src.evt and ../../acisf05468/products/events/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Sep 22 17:44:22 2011] Size of ../../acisf05468/products/events/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_src.evt.gz[events] = 155 counts
[Thu Sep 22 17:44:22 2011] Mean chipx,y = (337.59, 485.23)
[Thu Sep 22 17:44:22 2011] Mean tdetx,y = (4254.59, 2187.23)
[Thu Sep 22 17:44:22 2011] chipx,y range = (320.00-355.00, 466.00-504.00)
[Thu Sep 22 17:44:22 2011] Size of ../../acisf05468/products/events/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 12 counts
[Thu Sep 22 17:44:22 2011] ../../acisf05468/products/images/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_src.img and ../../acisf05468/products/images/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Sep 22 17:44:22 2011] ../../acisf05468/products/spectra/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_src.pi and ../../acisf05468/products/spectra/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Sep 22 17:44:28 2011] ../../acisf05468/products/lightcurves/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_src.lc and ../../acisf05468/products/lightcurves/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Sep 22 17:46:28 2011] Keeping rmf generated by specextract
[Thu Sep 22 17:46:28 2011] 237.443
[Thu Sep 22 17:46:33 2011] Updating aperture counts using extracted products
[Thu Sep 22 17:46:33 2011] Error reading totcts from fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Sep 22 17:46:34 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 17:46:34 2011] Using photon index=1.80, rate=0.00399, arf fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2.arf
[Thu Sep 22 17:46:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 17:46:34 2011] Updating source flux to 3.4e-14
[Thu Sep 22 17:46:48 2011] Reading fit data from acisf05468/analysis//spectral/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_pl.csv
[Thu Sep 22 17:46:48 2011] Spectral fit parameter nH value = 8.93579e+21
[Thu Sep 22 17:46:48 2011] Spectral fit parameter PhoIndex value = 2.66917
[Thu Sep 22 17:46:48 2011] Failed to get F(0.3-8.0) from acisf05468/analysis//spectral/fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 17:46:48 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 17:46:48 2011] Using Nh = 8.9e+21, photon index=2.67, rate=0.00399, arf fullrun_ccd7_acisf05468_pi14-548_pass1_cl_src2.arf
[Thu Sep 22 17:46:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 17:46:48 2011] Updating source flux to 3.1e-14