[Thu Sep 22 21:56:03 2011] Detection parameters:
  Position = (998.3, 78.3) = 4 30 12.42 35 16 28.0
  Extent = 0.5" x 0.5", rotation angle = 65 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0003 +/- 9e-05

[Thu Sep 22 21:56:10 2011] Off-axis axis estimate = 0.50'
[Thu Sep 22 21:57:43 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 21:57:43 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Sep 22 21:57:43 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.335
[Thu Sep 22 21:57:43 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.39"
[Thu Sep 22 21:57:44 2011] fullrun_ccd3_acisf05429_pi14-548_cl_pass0_src30.ximg exists
[Thu Sep 22 21:57:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05429_pi14-548_cl_pass0_src30.csv
[Thu Sep 22 21:57:44 2011] fullrun_ccd3_acisf05429_pi14-548_cl_pass0_src30_1.ximg exists
[Thu Sep 22 21:57:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05429_pi14-548_cl_pass0_src30.csv
[Thu Sep 22 21:57:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05429_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05429_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 21:57:45 2011] fullrun_ccd3_acisf05429_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Thu Sep 22 21:57:45 2011] fullrun_ccd3_acisf05429_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Sep 22 21:57:45 2011] Fit fullrun_ccd3_acisf05429_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Sep 22 21:58:09 2011] Spatial fit model total counts = 16.965000, observed total counts = 17.000000
[Thu Sep 22 21:58:09 2011] Offset between fit and detection position for source 10 = 0.495090 pixels
[Thu Sep 22 21:58:09 2011] 17.526180 total counts/ 5.771980 bgd. counts: snr = 4.892498
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.495090 pixels
  Position = (998.7, 78.6) = 4 30 12.42 35 16 27.9
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 11.8 +/- 4.2
  Background counts = 5.8
  Rate = 0.0003 +/- 0.0001
[Thu Sep 22 21:58:09 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 21:58:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 21:58:09 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 21:58:09 2011] Source does appear to be extended
[Thu Sep 22 21:58:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 21:58:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 21:58:38 2011] Initial guess for spatial extent in simple fitting = 0.30"
[Thu Sep 22 21:58:38 2011] source mask rpix=0.6, npix_max = 4, mask sum = 6, frac = 1.204
[Thu Sep 22 21:58:38 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 0.30"
[Thu Sep 22 21:58:41 2011] fullrun_ccd3_acisf05429_pi14-548_cl_pass1_src29.ximg exists
[Thu Sep 22 21:58:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05429_pi14-548_cl_pass1_src29.csv
[Thu Sep 22 21:58:41 2011] fullrun_ccd3_acisf05429_pi14-548_cl_pass1_src29_1.ximg exists
[Thu Sep 22 21:58:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05429_pi14-548_cl_pass1_src29.csv
[Thu Sep 22 21:58:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05429_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05429_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 21:58:42 2011] fullrun_ccd3_acisf05429_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Thu Sep 22 21:58:42 2011] fullrun_ccd3_acisf05429_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Sep 22 21:58:42 2011] Fit fullrun_ccd3_acisf05429_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Thu Sep 22 21:59:04 2011] Spatial fit model total counts = 16.858300, observed total counts = 17.000000
[Thu Sep 22 21:59:04 2011] Offset between fit and detection position for source 10 = 0.000558 pixels
[Thu Sep 22 21:59:04 2011] 17.421320 total counts/ 5.664420 bgd. counts: snr = 4.939865
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.000558 pixels
  Position = (998.7, 78.6) = 4 30 12.42 35 16 27.9
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 11.8 +/- 4.2
  Background counts = 5.7
  Rate = 0.0003 +/- 0.0001
[Thu Sep 22 21:59:04 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 21:59:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 21:59:04 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 21:59:04 2011] Source does appear to be extended
[Thu Sep 22 21:59:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 22:05:42 2011] Not overwriting source region fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_src.reg
[Thu Sep 22 22:05:42 2011] Extracting stamp from image fullrun_ccd3_acisf05429_pi14-548_cl_sm2.00.img.gz, (985, 65) - (1013, 92)
[Thu Sep 22 22:05:42 2011] Writing fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10.gif
[Thu Sep 22 22:07:35 2011] ../../acisf05429/products/events/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_src.evt and ../../acisf05429/products/events/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Sep 22 22:07:35 2011] Size of ../../acisf05429/products/events/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_src.evt.gz[events] = 12 counts
[Thu Sep 22 22:07:35 2011] Mean chipx,y = (996.67, 954.67)
[Thu Sep 22 22:07:35 2011] Mean tdetx,y = (4177.33, 4057.67)
[Thu Sep 22 22:07:35 2011] chipx,y range = (982.00-1013.00, 939.00-972.00)
[Thu Sep 22 22:07:35 2011] Size of ../../acisf05429/products/events/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 3 counts
[Thu Sep 22 22:07:35 2011] ../../acisf05429/products/images/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_src.img and ../../acisf05429/products/images/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Sep 22 22:07:35 2011] ../../acisf05429/products/spectra/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_src.pi and ../../acisf05429/products/spectra/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Sep 22 22:07:35 2011] Not generating rmf since there are only 11 counts
[Thu Sep 22 22:07:38 2011] ../../acisf05429/products/lightcurves/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_src.lc and ../../acisf05429/products/lightcurves/fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Sep 22 22:09:05 2011] 204.685
[Thu Sep 22 22:09:17 2011] Updating aperture counts using extracted products
[Thu Sep 22 22:09:17 2011] Error reading totcts from fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Sep 22 22:09:19 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 22:09:19 2011] Using photon index=1.80, rate=0.000297, arf fullrun_ccd3_acisf05429_pi14-548_pass1_cl_src10.arf
[Thu Sep 22 22:09:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 22:09:19 2011] Updating source flux to 3.3e-15
[Thu Sep 22 22:10:31 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting