[Wed Sep 21 10:16:30 2011] Detection parameters:
  Position = (90.0, 306.1) = 4 33 34.06 24 21 17.0
  Extent = 0.5" x 0.5", rotation angle = 22 degrees
  Source counts = 806.6 +/- 28.6
  Background counts = 9.4
  Rate = 0.06 +/- 0.002

[Wed Sep 21 10:16:31 2011] Off-axis axis estimate = 0.71'
[Wed Sep 21 10:16:42 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 10:16:42 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Sep 21 10:16:42 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.609
[Wed Sep 21 10:16:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Wed Sep 21 10:16:47 2011] fullrun_ccd7_acisf05416_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 10:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05416_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 10:16:47 2011] fullrun_ccd7_acisf05416_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 10:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf05416_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 10:16:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05416_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05416_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 10:16:47 2011] fullrun_ccd7_acisf05416_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 10:16:47 2011] fullrun_ccd7_acisf05416_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 10:16:47 2011] Fit fullrun_ccd7_acisf05416_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 10:16:49 2011] Spatial fit model total counts = 817.999000, observed total counts = 818.000000
[Wed Sep 21 10:16:49 2011] Offset between fit and detection position for source 1 = 0.709554 pixels
[Wed Sep 21 10:16:49 2011] 816.493400 total counts/ 37.235400 bgd. counts: snr = 127.703635
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.709554 pixels
  Position = (90.5, 306.6) = 4 33 34.06 24 21 17.0
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 779.3 +/- 28.6
  Background counts = 37.2
  Rate = 0.06 +/- 0.002
[Wed Sep 21 10:16:49 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 10:16:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 10:16:49 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 10:16:49 2011] Source does appear to be extended
[Wed Sep 21 10:16:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 10:16:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 10:16:57 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Sep 21 10:16:57 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.266
[Wed Sep 21 10:16:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.41"
[Wed Sep 21 10:16:57 2011] fullrun_ccd7_acisf05416_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 10:16:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf05416_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 10:16:57 2011] fullrun_ccd7_acisf05416_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 10:16:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf05416_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 10:16:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf05416_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf05416_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 10:16:57 2011] fullrun_ccd7_acisf05416_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 10:16:57 2011] fullrun_ccd7_acisf05416_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 10:16:57 2011] Fit fullrun_ccd7_acisf05416_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 10:16:59 2011] Spatial fit model total counts = 818.000000, observed total counts = 818.000000
[Wed Sep 21 10:16:59 2011] Offset between fit and detection position for source 1 = 0.000029 pixels
[Wed Sep 21 10:16:59 2011] 816.494200 total counts/ 37.299200 bgd. counts: snr = 127.584054
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000029 pixels
  Position = (90.5, 306.6) = 4 33 34.06 24 21 17.0
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 779.2 +/- 28.6
  Background counts = 37.3
  Rate = 0.06 +/- 0.002
[Wed Sep 21 10:16:59 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 10:16:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 10:16:59 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 10:16:59 2011] Source does appear to be extended
[Wed Sep 21 10:16:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 10:17:02 2011] Not overwriting source region fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 10:17:02 2011] Extracting stamp from image fullrun_ccd7_acisf05416_pi14-548_cl_sm2.00.img.gz, (72, 288) - (109, 325)
[Wed Sep 21 10:17:02 2011] Writing fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 10:17:03 2011] ../../acisf05416/products/events/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_src.evt and ../../acisf05416/products/events/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 10:17:03 2011] Size of ../../acisf05416/products/events/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_src.evt.gz[events] = 789 counts
[Wed Sep 21 10:17:03 2011] Mean chipx,y = (295.35, 510.92)
[Wed Sep 21 10:17:03 2011] Mean tdetx,y = (4212.35, 2212.92)
[Wed Sep 21 10:17:03 2011] chipx,y range = (277.00-314.00, 493.00-529.00)
[Wed Sep 21 10:17:03 2011] Size of ../../acisf05416/products/events/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 36 counts
[Wed Sep 21 10:17:03 2011] ../../acisf05416/products/images/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_src.img and ../../acisf05416/products/images/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 10:17:03 2011] ../../acisf05416/products/spectra/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_src.pi and ../../acisf05416/products/spectra/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 10:17:08 2011] ../../acisf05416/products/lightcurves/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_src.lc and ../../acisf05416/products/lightcurves/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 10:17:19 2011] Keeping rmf generated by specextract
[Wed Sep 21 10:17:19 2011] 237.378
[Wed Sep 21 10:17:20 2011] Updating aperture counts using extracted products
[Wed Sep 21 10:17:20 2011] Error reading totcts from fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 10:17:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 10:17:20 2011] Using photon index=1.80, rate=0.0561, arf fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 10:17:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 10:17:20 2011] Updating source flux to 4.2e-13
[Wed Sep 21 10:17:28 2011] Reading fit data from acisf05416/analysis//spectral/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 21 10:17:28 2011] Spectral fit parameter nH value = 2.42446e+21
[Wed Sep 21 10:17:28 2011] Spectral fit parameter PhoIndex value = 2.84992
[Wed Sep 21 10:17:28 2011] Failed to get F(0.3-8.0) from acisf05416/analysis//spectral/fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 10:17:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 10:17:28 2011] Using Nh = 2.4e+21, photon index=2.85, rate=0.0561, arf fullrun_ccd7_acisf05416_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 10:17:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 10:17:28 2011] Updating source flux to 2.9e-13