[Sun Oct 30 05:57:49 2011] Detection parameters:
  Position = (1065.7, 335.8) = 19 1 37.07 -36 56 1.8
  Extent = 0.5" x 0.5", rotation angle = 162 degrees
  Source counts = 22.8 +/- 4.8
  Background counts = 0.2
  Rate = 0.002 +/- 0.0003

[Sun Oct 30 05:57:50 2011] Off-axis axis estimate = 2.88'
[Sun Oct 30 05:58:39 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:58:39 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Oct 30 05:58:39 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.847
[Sun Oct 30 05:58:39 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.56"
[Sun Oct 30 05:58:40 2011] fullrun_ccd3_acisf05403_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct 30 05:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05403_pi14-548_cl_pass0_src10.csv
[Sun Oct 30 05:58:40 2011] fullrun_ccd3_acisf05403_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct 30 05:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05403_pi14-548_cl_pass0_src10.csv
[Sun Oct 30 05:58:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05403_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05403_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:58:41 2011] fullrun_ccd3_acisf05403_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct 30 05:58:41 2011] fullrun_ccd3_acisf05403_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct 30 05:58:41 2011] Fit fullrun_ccd3_acisf05403_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct 30 05:58:50 2011] Spatial fit model total counts = 21.862800, observed total counts = 23.000000
[Sun Oct 30 05:58:50 2011] Offset between fit and detection position for source 8 = 0.693897 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.693897 pixels
  Position = (1066.2, 336.2) = 19 1 37.07 -36 56 1.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 21.9 +/- 4.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Sun Oct 30 05:58:50 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:58:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:58:50 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:58:50 2011] Source does appear to be extended
[Sun Oct 30 05:58:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:59:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:59:14 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sun Oct 30 05:59:14 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.299
[Sun Oct 30 05:59:14 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.62"
[Sun Oct 30 05:59:16 2011] fullrun_ccd3_acisf05403_pi14-548_cl_pass1_src10.ximg exists
[Sun Oct 30 05:59:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05403_pi14-548_cl_pass1_src10.csv
[Sun Oct 30 05:59:16 2011] fullrun_ccd3_acisf05403_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Oct 30 05:59:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05403_pi14-548_cl_pass1_src10.csv
[Sun Oct 30 05:59:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05403_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05403_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:59:16 2011] fullrun_ccd3_acisf05403_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Oct 30 05:59:16 2011] fullrun_ccd3_acisf05403_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Oct 30 05:59:16 2011] Fit fullrun_ccd3_acisf05403_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Oct 30 05:59:23 2011] Spatial fit model total counts = 22.404200, observed total counts = 23.000000
[Sun Oct 30 05:59:23 2011] Offset between fit and detection position for source 8 = 0.038718 pixels
[Sun Oct 30 05:59:23 2011] 22.404200 total counts/ 0.000000 bgd. counts: snr = 120312447117413.562500
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.038718 pixels
  Position = (1066.2, 336.3) = 19 1 37.07 -36 56 1.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 22.4 +/- 4.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Sun Oct 30 05:59:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:59:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:59:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:59:23 2011] Source does appear to be extended
[Sun Oct 30 05:59:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 06:01:11 2011] Not overwriting source region fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_src.reg
[Sun Oct 30 06:01:11 2011] Extracting stamp from image fullrun_ccd3_acisf05403_pi14-548_cl_sm2.00.img.gz, (1038, 308) - (1094, 364)
[Sun Oct 30 06:01:11 2011] Writing fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8.gif
[Sun Oct 30 06:01:42 2011] ../../acisf05403/products/events/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_src.evt and ../../acisf05403/products/events/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun Oct 30 06:01:42 2011] Size of ../../acisf05403/products/events/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_src.evt.gz[events] = 23 counts
[Sun Oct 30 06:01:42 2011] Mean chipx,y = (1007.61, 663.09)
[Sun Oct 30 06:01:42 2011] Mean tdetx,y = (4468.91, 4068.61)
[Sun Oct 30 06:01:42 2011] chipx,y range = (990.00-1023.00, 646.00-680.00)
[Sun Oct 30 06:01:42 2011] Size of ../../acisf05403/products/events/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 2 counts
[Sun Oct 30 06:01:42 2011] ../../acisf05403/products/images/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_src.img and ../../acisf05403/products/images/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun Oct 30 06:01:42 2011] ../../acisf05403/products/spectra/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_src.pi and ../../acisf05403/products/spectra/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun Oct 30 06:01:42 2011] Not generating rmf since there are only 22 counts
[Sun Oct 30 06:01:45 2011] ../../acisf05403/products/lightcurves/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_src.lc and ../../acisf05403/products/lightcurves/fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun Oct 30 06:02:01 2011] 198.659
[Sun Oct 30 06:02:11 2011] Updating aperture counts using extracted products
[Sun Oct 30 06:02:11 2011] Error reading totcts from fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8_src.pi.gz
[Sun Oct 30 06:02:11 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 06:02:11 2011] Using photon index=1.80, rate=0.0015, arf fullrun_ccd3_acisf05403_pi14-548_pass1_cl_src8.arf
[Sun Oct 30 06:02:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 06:02:11 2011] Updating source flux to 1.7e-14
[Sun Oct 30 06:02:32 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting