[Sun Oct 30 05:57:45 2011] Detection parameters:
  Position = (1092.8, 793.3) = 19 1 15.84 -37 3 44.3
  Extent = 1.8" x 1.1", rotation angle = 143 degrees
  Source counts = 106.4 +/- 10.6
  Background counts = 6.6
  Rate = 0.007 +/- 0.0007

[Sun Oct 30 05:57:46 2011] Off-axis axis estimate = 7.89'
[Sun Oct 30 05:58:37 2011] Using EEF radius (= 2.75 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:58:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:58:37 2011] Initial guess for spatial extent in simple fitting = 2.75"
[Sun Oct 30 05:58:37 2011] source mask rpix=5.6, npix_max = 148, mask sum = 144, frac = 0.968
[Sun Oct 30 05:58:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.75"
[Sun Oct 30 05:58:38 2011] fullrun_ccd0_acisf05403_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 05:58:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05403_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:58:38 2011] fullrun_ccd0_acisf05403_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 05:58:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05403_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:58:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05403_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05403_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:58:38 2011] fullrun_ccd0_acisf05403_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 05:58:38 2011] fullrun_ccd0_acisf05403_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:58:38 2011] Fit fullrun_ccd0_acisf05403_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:58:47 2011] Spatial fit model total counts = 126.769000, observed total counts = 126.000000
[Sun Oct 30 05:58:47 2011] Offset between fit and detection position for source 1 = 0.601024 pixels
[Sun Oct 30 05:58:47 2011] 126.877400 total counts/ 21.651400 bgd. counts: snr = 22.614140
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.601024 pixels
  Position = (1093.1, 793.7) = 19 1 15.85 -37 3 44.3
  Extent = 2.3 (2.0-2.7)", rotation angle = 0
  Source counts = 105.2 +/- 11.3
  Background counts = 21.7
  Rate = 0.007 +/- 0.0008
[Sun Oct 30 05:58:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:58:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:58:47 2011] Source does appear to be extended
[Sun Oct 30 05:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:59:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:59:11 2011] Initial guess for spatial extent in simple fitting = 2.27"
[Sun Oct 30 05:59:11 2011] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.956
[Sun Oct 30 05:59:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.27"
[Sun Oct 30 05:59:12 2011] fullrun_ccd0_acisf05403_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 05:59:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05403_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:59:12 2011] fullrun_ccd0_acisf05403_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 05:59:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05403_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:59:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05403_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05403_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:59:12 2011] fullrun_ccd0_acisf05403_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 05:59:12 2011] fullrun_ccd0_acisf05403_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:59:12 2011] Fit fullrun_ccd0_acisf05403_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:59:20 2011] Spatial fit model total counts = 124.325000, observed total counts = 124.000000
[Sun Oct 30 05:59:20 2011] Offset between fit and detection position for source 1 = 0.166782 pixels
[Sun Oct 30 05:59:20 2011] 123.973200 total counts/ 24.465800 bgd. counts: snr = 20.117577
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.166782 pixels
  Position = (1093.3, 793.7) = 19 1 15.84 -37 3 44.3
  Extent = 2.2 (1.8-2.5)", rotation angle = 0
  Source counts = 99.5 +/- 11.1
  Background counts = 24.5
  Rate = 0.007 +/- 0.0007
[Sun Oct 30 05:59:20 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:59:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:59:20 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:59:20 2011] Source does appear to be extended
[Sun Oct 30 05:59:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:59:45 2011] Not overwriting source region fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 05:59:45 2011] Extracting stamp from image fullrun_ccd0_acisf05403_pi14-548_cl_sm2.00.img.gz, (994, 694) - (1193, 893)
[Sun Oct 30 05:59:45 2011] Writing fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 05:59:46 2011] ../../acisf05403/products/events/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_src.evt and ../../acisf05403/products/events/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 30 05:59:46 2011] Size of ../../acisf05403/products/events/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_src.evt.gz[events] = 117 counts
[Sun Oct 30 05:59:46 2011] Mean chipx,y = (181.44, 796.46)
[Sun Oct 30 05:59:46 2011] Mean tdetx,y = (3857.46, 4950.56)
[Sun Oct 30 05:59:46 2011] chipx,y range = (157.00-206.00, 763.00-823.00)
[Sun Oct 30 05:59:46 2011] Size of ../../acisf05403/products/events/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 42 counts
[Sun Oct 30 05:59:46 2011] ../../acisf05403/products/images/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_src.img and ../../acisf05403/products/images/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 30 05:59:46 2011] ../../acisf05403/products/spectra/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_src.pi and ../../acisf05403/products/spectra/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 30 05:59:46 2011] Not generating rmf since there are only 99 counts
[Sun Oct 30 05:59:50 2011] ../../acisf05403/products/lightcurves/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_src.lc and ../../acisf05403/products/lightcurves/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 30 06:00:16 2011] 173.165
[Sun Oct 30 06:02:11 2011] Updating aperture counts using extracted products
[Sun Oct 30 06:02:11 2011] Error reading totcts from fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 06:02:11 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 06:02:11 2011] Using photon index=1.80, rate=0.00666, arf fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 06:02:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 06:02:11 2011] Updating source flux to 8.6e-14
[Sun Oct 30 06:02:14 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 06:02:19 2011] acisf05403/analysis//spectral/fullrun_ccd0_acisf05403_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete