[Mon Oct 10 09:56:54 2011] Detection parameters:
  Position = (1265.0, 888.6) = 13 11 19.28 -1 20 30.9
  Extent = 0.5" x 0.5", rotation angle = 53 degrees
  Source counts = 18.3 +/- 4.4
  Background counts = 0.7
  Rate = 0.002 +/- 0.0004

[Mon Oct 10 09:56:54 2011] Off-axis axis estimate = 1.38'
[Mon Oct 10 09:57:36 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 09:57:36 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 10 09:57:36 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.906
[Mon Oct 10 09:57:36 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.39"
[Mon Oct 10 09:57:37 2011] fullrun_ccd3_acisf00540_pi14-548_cl_pass0_src5.ximg exists
[Mon Oct 10 09:57:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00540_pi14-548_cl_pass0_src5.csv
[Mon Oct 10 09:57:37 2011] fullrun_ccd3_acisf00540_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Oct 10 09:57:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00540_pi14-548_cl_pass0_src5.csv
[Mon Oct 10 09:57:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00540_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00540_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 09:57:37 2011] fullrun_ccd3_acisf00540_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Oct 10 09:57:37 2011] fullrun_ccd3_acisf00540_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Oct 10 09:57:37 2011] Fit fullrun_ccd3_acisf00540_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Oct 10 09:57:45 2011] Spatial fit model total counts = 29.359800, observed total counts = 30.000000
[Mon Oct 10 09:57:45 2011] Offset between fit and detection position for source 17 = 0.942576 pixels
[Mon Oct 10 09:57:45 2011] 29.066958 total counts/ 0.001958 bgd. counts: snr = 656.918779
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.942576 pixels
  Position = (1265.7, 889.2) = 13 11 19.27 -1 20 30.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 29.1 +/- 5.4
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Mon Oct 10 09:57:45 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 09:57:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 09:57:45 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 09:57:45 2011] Source does appear to be extended
[Mon Oct 10 09:57:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 09:58:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 09:58:04 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct 10 09:58:04 2011] source mask rpix=0.9, npix_max = 8, mask sum = 7, frac = 0.874
[Mon Oct 10 09:58:04 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.45"
[Mon Oct 10 09:58:05 2011] fullrun_ccd3_acisf00540_pi14-548_cl_pass1_src5.ximg exists
[Mon Oct 10 09:58:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00540_pi14-548_cl_pass1_src5.csv
[Mon Oct 10 09:58:05 2011] fullrun_ccd3_acisf00540_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Oct 10 09:58:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00540_pi14-548_cl_pass1_src5.csv
[Mon Oct 10 09:58:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00540_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00540_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 09:58:05 2011] fullrun_ccd3_acisf00540_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Oct 10 09:58:05 2011] fullrun_ccd3_acisf00540_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Oct 10 09:58:05 2011] Fit fullrun_ccd3_acisf00540_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Oct 10 09:58:12 2011] Spatial fit model total counts = 28.026500, observed total counts = 30.000000
[Mon Oct 10 09:58:12 2011] Offset between fit and detection position for source 17 = 0.025829 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.025829 pixels
  Position = (1265.8, 889.2) = 13 11 19.27 -1 20 30.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 27.7 +/- 5.3
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Mon Oct 10 09:58:12 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 09:58:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 09:58:12 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 09:58:12 2011] Source does appear to be extended
[Mon Oct 10 09:58:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 09:59:53 2011] Not overwriting source region fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_src.reg
[Mon Oct 10 09:59:53 2011] Extracting stamp from image fullrun_ccd3_acisf00540_pi14-548_cl_sm2.00.img.gz, (1244, 867) - (1288, 911)
[Mon Oct 10 09:59:53 2011] Writing fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17.gif
[Mon Oct 10 10:00:09 2011] ../../acisf00540/products/events/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_src.evt and ../../acisf00540/products/events/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Oct 10 10:00:09 2011] Size of ../../acisf00540/products/events/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_src.evt.gz[events] = 28 counts
[Mon Oct 10 10:00:09 2011] Mean chipx,y = (978.43, 882.57)
[Mon Oct 10 10:00:09 2011] Mean tdetx,y = (4249.43, 4039.43)
[Mon Oct 10 10:00:09 2011] chipx,y range = (961.00-995.00, 865.00-898.00)
[Mon Oct 10 10:00:09 2011] Size of ../../acisf00540/products/events/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 5 counts
[Mon Oct 10 10:00:10 2011] ../../acisf00540/products/images/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_src.img and ../../acisf00540/products/images/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Oct 10 10:00:10 2011] ../../acisf00540/products/spectra/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_src.pi and ../../acisf00540/products/spectra/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Oct 10 10:00:10 2011] Not generating rmf since there are only 27 counts
[Mon Oct 10 10:00:16 2011] ../../acisf00540/products/lightcurves/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_src.lc and ../../acisf00540/products/lightcurves/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Oct 10 10:00:41 2011] 203.645
[Mon Oct 10 10:00:44 2011] Updating aperture counts using extracted products
[Mon Oct 10 10:00:44 2011] Error reading totcts from fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_src.pi.gz
[Mon Oct 10 10:00:44 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 10:00:44 2011] Using photon index=1.80, rate=0.00268, arf fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17.arf
[Mon Oct 10 10:00:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 10:00:45 2011] Updating source flux to 2.7e-14
[Mon Oct 10 10:00:54 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 10 10:00:55 2011] acisf00540/analysis//spectral/fullrun_ccd3_acisf00540_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete