[Mon Oct 17 00:26:47 2011] Detection parameters:
  Position = (1052.8, 732.9) = 5 46 8.51 -0 10 2.3
  Extent = 0.7" x 0.6", rotation angle = 143 degrees
  Source counts = 14.0 +/- 3.9
  Background counts = 1.0
  Rate = 0.0008 +/- 0.0002

[Mon Oct 17 00:26:48 2011] Off-axis axis estimate = 3.86'
[Mon Oct 17 00:27:25 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:27:25 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Mon Oct 17 00:27:25 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Mon Oct 17 00:27:25 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.79"
[Mon Oct 17 00:27:25 2011] fullrun_ccd2_acisf05382_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 17 00:27:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05382_pi14-548_cl_pass0_src3.csv
[Mon Oct 17 00:27:25 2011] fullrun_ccd2_acisf05382_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 17 00:27:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05382_pi14-548_cl_pass0_src3.csv
[Mon Oct 17 00:27:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05382_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05382_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:27:25 2011] fullrun_ccd2_acisf05382_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 17 00:27:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05382_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Oct 17 00:27:25 2011] fullrun_ccd2_acisf05382_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 17 00:27:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05382_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Oct 17 00:27:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05382_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05382_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:27:33 2011] Spatial fit model total counts = 14.509000, observed total counts = 16.000000
[Mon Oct 17 00:27:33 2011] Offset between fit and detection position for source 2 = 0.734975 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.734975 pixels
  Position = (1053.2, 733.5) = 5 46 8.51 -0 10 2.2
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Mon Oct 17 00:27:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:27:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:27:33 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:27:33 2011] Source does appear to be extended
[Mon Oct 17 00:27:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:27:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:27:50 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Mon Oct 17 00:27:50 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.018
[Mon Oct 17 00:27:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.84"
[Mon Oct 17 00:27:50 2011] fullrun_ccd2_acisf05382_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 17 00:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05382_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 00:27:50 2011] fullrun_ccd2_acisf05382_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 17 00:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05382_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 00:27:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05382_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05382_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:27:50 2011] fullrun_ccd2_acisf05382_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 17 00:27:50 2011] fullrun_ccd2_acisf05382_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 17 00:27:50 2011] Fit fullrun_ccd2_acisf05382_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 17 00:27:55 2011] Spatial fit model total counts = 15.298600, observed total counts = 16.000000
[Mon Oct 17 00:27:55 2011] Offset between fit and detection position for source 2 = 0.061172 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.061172 pixels
  Position = (1053.1, 733.5) = 5 46 8.51 -0 10 2.2
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 15.3 +/- 3.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Mon Oct 17 00:27:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:27:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:27:55 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:27:55 2011] Source does appear to be extended
[Mon Oct 17 00:27:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:30:29 2011] Not overwriting source region fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 17 00:30:29 2011] Extracting stamp from image fullrun_ccd2_acisf05382_pi14-548_cl_sm2.00.img.gz, (1015, 695) - (1091, 771)
[Mon Oct 17 00:30:29 2011] Writing fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2.gif
[Mon Oct 17 00:30:45 2011] ../../acisf05382/products/events/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_src.evt and ../../acisf05382/products/events/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 17 00:30:46 2011] Size of ../../acisf05382/products/events/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_src.evt.gz[events] = 15 counts
[Mon Oct 17 00:30:46 2011] Mean chipx,y = (17.00, 598.07)
[Mon Oct 17 00:30:46 2011] Mean tdetx,y = (3659.07, 4069.00)
[Mon Oct 17 00:30:46 2011] chipx,y range = (6.00-28.00, 577.00-612.00)
[Mon Oct 17 00:30:46 2011] Size of ../../acisf05382/products/events/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 26 counts
[Mon Oct 17 00:30:46 2011] ../../acisf05382/products/images/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_src.img and ../../acisf05382/products/images/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 17 00:30:46 2011] Not generating rmf since there are only 15 counts
[Mon Oct 17 00:30:46 2011] arf not found, will run specextract
[Mon Oct 17 00:30:47 2011] ../../acisf05382/products/spectra/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_bkg.pi not found
[Mon Oct 17 00:30:47 2011] ../../acisf05382/products/spectra/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2.warf not found
[Mon Oct 17 00:30:47 2011] ../../acisf05382/products/spectra/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2.wrmf not found
[Mon Oct 17 00:30:47 2011] Removal of ../../acisf05382/products/spectra/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2.soff failed
[Mon Oct 17 00:30:47 2011] Failed to rename ../../acisf05382/products/spectra/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_grp.pi to ../../acisf05382/products/spectra/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_src.pi
[Mon Oct 17 00:30:54 2011] ../../acisf05382/products/lightcurves/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_src.lc and ../../acisf05382/products/lightcurves/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 17 00:31:09 2011] No arf file found
[Mon Oct 17 00:31:56 2011] Updating aperture counts using extracted products
[Mon Oct 17 00:31:56 2011] Error reading totcts from fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_src.pi
[Mon Oct 17 00:31:56 2011] No arf file for this source, not re-computing flux
[Mon Oct 17 00:32:00 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 00:32:01 2011] acisf05382/analysis//spectral/fullrun_ccd2_acisf05382_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete