[Mon Oct 24 11:57:44 2011] Detection parameters:
  Position = (387.5, 127.4) = 4 31 24.06 18 0 21.1
  Extent = 2.2" x 1.5", rotation angle = 31 degrees
  Source counts = 202.8 +/- 15.0
  Background counts = 23.2
  Rate = 0.002 +/- 0.0002

[Mon Oct 24 11:57:45 2011] Off-axis axis estimate = 8.01'
[Mon Oct 24 11:59:04 2011] Using EEF radius (= 2.84 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 11:59:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 11:59:04 2011] Initial guess for spatial extent in simple fitting = 2.84"
[Mon Oct 24 11:59:04 2011] source mask rpix=5.8, npix_max = 156, mask sum = 169, frac = 1.077
[Mon Oct 24 11:59:04 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.84"
[Mon Oct 24 11:59:04 2011] fullrun_ccd3_acisf05381_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 24 11:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05381_pi14-548_cl_pass0_src3.csv
[Mon Oct 24 11:59:04 2011] fullrun_ccd3_acisf05381_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 24 11:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05381_pi14-548_cl_pass0_src3.csv
[Mon Oct 24 11:59:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05381_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05381_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 11:59:06 2011] fullrun_ccd3_acisf05381_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 24 11:59:06 2011] fullrun_ccd3_acisf05381_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 24 11:59:06 2011] Fit fullrun_ccd3_acisf05381_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 24 11:59:22 2011] Spatial fit model total counts = 245.999000, observed total counts = 246.000000
[Mon Oct 24 11:59:22 2011] Offset between fit and detection position for source 27 = 1.205139 pixels
[Mon Oct 24 11:59:22 2011] 247.458400 total counts/ 86.446400 bgd. counts: snr = 17.317484
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.205139 pixels
  Position = (388.5, 128.0) = 4 31 24.04 18 0 21.2
  Extent = 1.6 (1.3-1.8)", rotation angle = 0
  Source counts = 161.0 +/- 15.7
  Background counts = 86.4
  Rate = 0.002 +/- 0.0002
[Mon Oct 24 11:59:22 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 11:59:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 11:59:22 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 11:59:22 2011] Source does appear to be extended
[Mon Oct 24 11:59:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 11:59:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 11:59:46 2011] Initial guess for spatial extent in simple fitting = 1.57"
[Mon Oct 24 11:59:46 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.027
[Mon Oct 24 11:59:46 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.57"
[Mon Oct 24 11:59:46 2011] fullrun_ccd3_acisf05381_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 24 11:59:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05381_pi14-548_cl_pass1_src3.csv
[Mon Oct 24 11:59:46 2011] fullrun_ccd3_acisf05381_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 24 11:59:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05381_pi14-548_cl_pass1_src3.csv
[Mon Oct 24 11:59:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05381_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05381_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 11:59:47 2011] fullrun_ccd3_acisf05381_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 24 11:59:47 2011] fullrun_ccd3_acisf05381_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 24 11:59:47 2011] Fit fullrun_ccd3_acisf05381_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 24 11:59:58 2011] Spatial fit model total counts = 195.000000, observed total counts = 195.000000
[Mon Oct 24 11:59:58 2011] Offset between fit and detection position for source 27 = 0.198825 pixels
[Mon Oct 24 11:59:58 2011] 194.547000 total counts/ 56.241000 bgd. counts: snr = 18.442275
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.198825 pixels
  Position = (388.6, 128.2) = 4 31 24.04 18 0 21.3
  Extent = 1.4 (1.1-1.6)", rotation angle = 0
  Source counts = 138.3 +/- 13.9
  Background counts = 56.2
  Rate = 0.001 +/- 0.0001
[Mon Oct 24 11:59:58 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 11:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 11:59:58 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 11:59:58 2011] Source does appear to be extended
[Mon Oct 24 11:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 12:04:15 2011] Not overwriting source region fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_src.reg
[Mon Oct 24 12:04:15 2011] Extracting stamp from image fullrun_ccd3_acisf05381_pi14-548_cl_sm2.00.img.gz, (326, 66) - (451, 191)
[Mon Oct 24 12:04:15 2011] Writing fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27.gif
[Mon Oct 24 12:04:30 2011] ../../acisf05381/products/events/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_src.evt and ../../acisf05381/products/events/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Mon Oct 24 12:04:30 2011] Size of ../../acisf05381/products/events/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_src.evt.gz[events] = 196 counts
[Mon Oct 24 12:04:30 2011] Mean chipx,y = (649.76, 81.62)
[Mon Oct 24 12:04:30 2011] Mean tdetx,y = (5050.38, 3710.76)
[Mon Oct 24 12:04:30 2011] chipx,y range = (622.00-674.00, 56.00-108.00)
[Mon Oct 24 12:04:30 2011] Size of ../../acisf05381/products/events/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 126 counts
[Mon Oct 24 12:04:30 2011] ../../acisf05381/products/images/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_src.img and ../../acisf05381/products/images/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Mon Oct 24 12:04:30 2011] rmf not found, will run specextract
[Mon Oct 24 12:04:30 2011] arf not found, will run specextract
[Mon Oct 24 12:04:32 2011] ../../acisf05381/products/spectra/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_bkg.pi not found
[Mon Oct 24 12:04:32 2011] ../../acisf05381/products/spectra/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27.warf not found
[Mon Oct 24 12:04:32 2011] ../../acisf05381/products/spectra/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27.wrmf not found
[Mon Oct 24 12:04:32 2011] Removal of ../../acisf05381/products/spectra/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27.soff failed
[Mon Oct 24 12:04:32 2011] Failed to rename ../../acisf05381/products/spectra/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_grp.pi to ../../acisf05381/products/spectra/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_src.pi
[Mon Oct 24 12:04:37 2011] ../../acisf05381/products/lightcurves/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_src.lc and ../../acisf05381/products/lightcurves/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Mon Oct 24 12:07:28 2011] No arf file found
[Mon Oct 24 12:07:41 2011] Updating aperture counts using extracted products
[Mon Oct 24 12:07:41 2011] Error reading totcts from fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_src.pi
[Mon Oct 24 12:07:41 2011] No arf file for this source, not re-computing flux
[Mon Oct 24 12:07:48 2011] Source 27 has no response, skipping
[Mon Oct 24 12:07:49 2011] acisf05381/analysis//spectral/fullrun_ccd3_acisf05381_pi14-548_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete