[Thu Sep 22 23:43:11 2011] Detection parameters:
  Position = (458.1, 349.8) = 6 58 39.19 -56 8 13.6
  Extent = 4.7" x 2.7", rotation angle = 2 degrees
  Source counts = 1097.4 +/- 35.7
  Background counts = 179.6
  Rate = 0.03 +/- 0.001

[Thu Sep 22 23:43:11 2011] Off-axis axis estimate = 10.85'
[Thu Sep 22 23:44:15 2011] Using EEF radius (= 5.23 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 23:44:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 23:44:15 2011] Initial guess for spatial extent in simple fitting = 5.23"
[Thu Sep 22 23:44:15 2011] source mask rpix=10.6, npix_max = 495, mask sum = 484, frac = 0.977
[Thu Sep 22 23:44:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.23"
[Thu Sep 22 23:44:15 2011] fullrun_ccd3_acisf05358_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 23:44:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05358_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 23:44:15 2011] fullrun_ccd3_acisf05358_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 23:44:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05358_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 23:44:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05358_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05358_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 23:44:16 2011] fullrun_ccd3_acisf05358_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 23:44:16 2011] fullrun_ccd3_acisf05358_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 23:44:16 2011] Fit fullrun_ccd3_acisf05358_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 23:44:32 2011] Spatial fit model total counts = 1352.000000, observed total counts = 1352.000000
[Thu Sep 22 23:44:32 2011] Offset between fit and detection position for source 23 = 0.538549 pixels
[Thu Sep 22 23:44:32 2011] 1353.173000 total counts/ 187.203000 bgd. counts: snr = 85.217929
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.538549 pixels
  Position = (458.6, 349.8) = 6 58 39.19 -56 8 13.8
  Extent = 4.5 (4.3-4.7)", rotation angle = 0
  Source counts = 1166.0 +/- 36.8
  Background counts = 187.2
  Rate = 0.04 +/- 0.001
[Thu Sep 22 23:44:32 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 23:44:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 23:44:32 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 23:44:32 2011] Source does appear to be extended
[Thu Sep 22 23:44:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 23:44:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 23:44:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 23:44:59 2011] Initial guess for spatial extent in simple fitting = 4.49"
[Thu Sep 22 23:44:59 2011] source mask rpix=9.1, npix_max = 370, mask sum = 361, frac = 0.974
[Thu Sep 22 23:44:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.49"
[Thu Sep 22 23:44:59 2011] fullrun_ccd3_acisf05358_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 23:44:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05358_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 23:44:59 2011] fullrun_ccd3_acisf05358_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 23:44:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf05358_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 23:44:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf05358_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf05358_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 23:44:59 2011] fullrun_ccd3_acisf05358_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 23:44:59 2011] fullrun_ccd3_acisf05358_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 23:44:59 2011] Fit fullrun_ccd3_acisf05358_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 23:45:13 2011] Spatial fit model total counts = 1312.000000, observed total counts = 1312.000000
[Thu Sep 22 23:45:13 2011] Offset between fit and detection position for source 23 = 0.085618 pixels
[Thu Sep 22 23:45:13 2011] 1313.429000 total counts/ 164.179000 bgd. counts: snr = 89.692413
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.085618 pixels
  Position = (458.6, 349.8) = 6 58 39.19 -56 8 13.8
  Extent = 4.4 (4.2-4.6)", rotation angle = 0
  Source counts = 1149.2 +/- 36.2
  Background counts = 164.2
  Rate = 0.04 +/- 0.001
[Thu Sep 22 23:45:13 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 23:45:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 23:45:13 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 23:45:13 2011] Source does appear to be extended
[Thu Sep 22 23:45:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 23:47:19 2011] Not overwriting source region fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_src.reg
[Thu Sep 22 23:47:19 2011] Extracting stamp from image fullrun_ccd3_acisf05358_pi14-548_cl_sm2.00.img.gz, (256, 148) - (661, 552)
[Thu Sep 22 23:47:19 2011] Writing fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23.gif
[Thu Sep 22 23:47:20 2011] ../../acisf05358/products/events/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_src.evt and ../../acisf05358/products/events/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Thu Sep 22 23:47:20 2011] Size of ../../acisf05358/products/events/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_src.evt.gz[events] = 1287 counts
[Thu Sep 22 23:47:20 2011] Mean chipx,y = (375.18, 96.43)
[Thu Sep 22 23:47:20 2011] Mean tdetx,y = (5035.57, 3436.18)
[Thu Sep 22 23:47:20 2011] chipx,y range = (324.00-420.00, 52.00-145.00)
[Thu Sep 22 23:47:20 2011] Size of ../../acisf05358/products/events/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 311 counts
[Thu Sep 22 23:47:20 2011] ../../acisf05358/products/images/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_src.img and ../../acisf05358/products/images/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Thu Sep 22 23:47:20 2011] ../../acisf05358/products/spectra/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_src.pi and ../../acisf05358/products/spectra/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Thu Sep 22 23:47:23 2011] ../../acisf05358/products/lightcurves/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_src.lc and ../../acisf05358/products/lightcurves/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Thu Sep 22 23:47:51 2011] Keeping rmf generated by specextract
[Thu Sep 22 23:47:51 2011] 156.194
[Thu Sep 22 23:47:55 2011] Updating aperture counts using extracted products
[Thu Sep 22 23:47:55 2011] Error reading totcts from fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_src.pi.gz
[Thu Sep 22 23:47:55 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 23:47:55 2011] Using photon index=1.80, rate=0.036, arf fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23.arf
[Thu Sep 22 23:47:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 23:47:55 2011] Updating source flux to 5e-13
[Thu Sep 22 23:48:19 2011] Reading fit data from acisf05358/analysis//spectral/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_pl.csv
[Thu Sep 22 23:48:19 2011] Spectral fit parameter nH value = 2.87003e+13
[Thu Sep 22 23:48:19 2011] Spectral fit parameter PhoIndex value = 2.61133
[Thu Sep 22 23:48:19 2011] Failed to get F(0.3-8.0) from acisf05358/analysis//spectral/fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 23:48:19 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 23:48:19 2011] Using Nh = 2.9e+13, photon index=2.61, rate=0.036, arf fullrun_ccd3_acisf05358_pi14-548_pass1_cl_src23.arf
[Thu Sep 22 23:48:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 23:48:19 2011] Updating source flux to 5.7e-13