[Thu Oct 20 18:23:29 2011] Detection parameters:
  Position = (456.6, 921.2) = 6 58 23.16 -55 54 14.1
  Extent = 1.2" x 0.7", rotation angle = 80 degrees
  Source counts = 139.5 +/- 12.5
  Background counts = 16.5
  Rate = 0.001 +/- 0.0001

[Thu Oct 20 18:23:32 2011] Off-axis axis estimate = 4.21'
[Thu Oct 20 18:25:24 2011] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 18:25:24 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Thu Oct 20 18:25:24 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.927
[Thu Oct 20 18:25:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.90"
[Thu Oct 20 18:25:25 2011] fullrun_ccd2_acisf05356_pi14-548_cl_pass0_src3.ximg exists
[Thu Oct 20 18:25:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05356_pi14-548_cl_pass0_src3.csv
[Thu Oct 20 18:25:25 2011] fullrun_ccd2_acisf05356_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Oct 20 18:25:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05356_pi14-548_cl_pass0_src3.csv
[Thu Oct 20 18:25:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05356_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05356_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 18:25:26 2011] fullrun_ccd2_acisf05356_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Oct 20 18:25:26 2011] fullrun_ccd2_acisf05356_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Oct 20 18:25:26 2011] Fit fullrun_ccd2_acisf05356_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Oct 20 18:25:44 2011] Spatial fit model total counts = 188.292000, observed total counts = 184.000000
[Thu Oct 20 18:25:44 2011] Offset between fit and detection position for source 3 = 0.533171 pixels
[Thu Oct 20 18:25:44 2011] 187.630100 total counts/ 31.951100 bgd. counts: snr = 27.541471
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.533171 pixels
  Position = (457.1, 921.2) = 6 58 23.15 -55 54 14.3
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 155.7 +/- 13.7
  Background counts = 32.0
  Rate = 0.002 +/- 0.0001
[Thu Oct 20 18:25:44 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 18:25:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 18:25:44 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 18:25:44 2011] Source does appear to be extended
[Thu Oct 20 18:25:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 18:26:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 18:26:16 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Thu Oct 20 18:26:16 2011] source mask rpix=1.8, npix_max = 21, mask sum = 11, frac = 0.523
[Thu Oct 20 18:26:16 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.88"
[Thu Oct 20 18:26:17 2011] fullrun_ccd2_acisf05356_pi14-548_cl_pass1_src3.ximg exists
[Thu Oct 20 18:26:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05356_pi14-548_cl_pass1_src3.csv
[Thu Oct 20 18:26:17 2011] fullrun_ccd2_acisf05356_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Oct 20 18:26:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf05356_pi14-548_cl_pass1_src3.csv
[Thu Oct 20 18:26:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf05356_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf05356_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 18:26:18 2011] fullrun_ccd2_acisf05356_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Oct 20 18:26:18 2011] fullrun_ccd2_acisf05356_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Oct 20 18:26:18 2011] Fit fullrun_ccd2_acisf05356_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Oct 20 18:26:34 2011] Spatial fit model total counts = 191.256000, observed total counts = 184.000000
[Thu Oct 20 18:26:34 2011] Offset between fit and detection position for source 3 = 0.008438 pixels
[Thu Oct 20 18:26:34 2011] 190.609800 total counts/ 33.442800 bgd. counts: snr = 27.177534
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.008438 pixels
  Position = (457.1, 921.2) = 6 58 23.15 -55 54 14.3
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 157.2 +/- 13.8
  Background counts = 33.4
  Rate = 0.002 +/- 0.0001
[Thu Oct 20 18:26:34 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 18:26:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 18:26:34 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 18:26:34 2011] Source does appear to be extended
[Thu Oct 20 18:26:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 18:28:52 2011] Not overwriting source region fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_src.reg
[Thu Oct 20 18:28:52 2011] Extracting stamp from image fullrun_ccd2_acisf05356_pi14-548_cl_sm2.00.img.gz, (418, 882) - (496, 960)
[Thu Oct 20 18:28:52 2011] Writing fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3.gif
[Thu Oct 20 18:28:59 2011] ../../acisf05356/products/events/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_src.evt and ../../acisf05356/products/events/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct 20 18:28:59 2011] Size of ../../acisf05356/products/events/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_src.evt.gz[events] = 170 counts
[Thu Oct 20 18:28:59 2011] Mean chipx,y = (193.77, 612.36)
[Thu Oct 20 18:28:59 2011] Mean tdetx,y = (3673.36, 3892.23)
[Thu Oct 20 18:28:59 2011] chipx,y range = (175.00-216.00, 590.00-633.00)
[Thu Oct 20 18:28:59 2011] Size of ../../acisf05356/products/events/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 133 counts
[Thu Oct 20 18:28:59 2011] ../../acisf05356/products/images/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_src.img and ../../acisf05356/products/images/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct 20 18:28:59 2011] ../../acisf05356/products/spectra/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_src.pi and ../../acisf05356/products/spectra/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct 20 18:29:02 2011] ../../acisf05356/products/lightcurves/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_src.lc and ../../acisf05356/products/lightcurves/fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct 20 18:30:17 2011] Keeping rmf generated by specextract
[Thu Oct 20 18:30:18 2011] 196.62
[Thu Oct 20 18:32:29 2011] Updating aperture counts using extracted products
[Thu Oct 20 18:32:29 2011] Error reading totcts from fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct 20 18:32:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 18:32:30 2011] Using photon index=1.80, rate=0.00162, arf fullrun_ccd2_acisf05356_pi14-548_pass1_cl_src3.arf
[Thu Oct 20 18:32:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 18:32:30 2011] Updating source flux to 1.8e-14