[Thu Oct 20 18:23:28 2011] Detection parameters:
  Position = (1090.9, 800.4) = 6 59 10.93 -55 53 27.0
  Extent = 1.7" x 1.2", rotation angle = 132 degrees
  Source counts = 56.6 +/- 8.5
  Background counts = 15.4
  Rate = 0.0006 +/- 9e-05

[Thu Oct 20 18:23:28 2011] Off-axis axis estimate = 6.72'
[Thu Oct 20 18:25:22 2011] Using EEF radius (= 2.02 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 18:25:22 2011] Initial guess for spatial extent in simple fitting = 2.02"
[Thu Oct 20 18:25:22 2011] source mask rpix=4.1, npix_max = 84, mask sum = 90, frac = 1.064
[Thu Oct 20 18:25:22 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.02"
[Thu Oct 20 18:25:23 2011] fullrun_ccd1_acisf05356_pi14-548_cl_pass0_src11.ximg exists
[Thu Oct 20 18:25:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05356_pi14-548_cl_pass0_src11.csv
[Thu Oct 20 18:25:23 2011] fullrun_ccd1_acisf05356_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Oct 20 18:25:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05356_pi14-548_cl_pass0_src11.csv
[Thu Oct 20 18:25:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05356_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05356_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 18:25:23 2011] fullrun_ccd1_acisf05356_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Oct 20 18:25:24 2011] fullrun_ccd1_acisf05356_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Oct 20 18:25:24 2011] Fit fullrun_ccd1_acisf05356_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Oct 20 18:25:40 2011] Spatial fit model total counts = 70.990200, observed total counts = 70.000000
[Thu Oct 20 18:25:40 2011] Offset between fit and detection position for source 20 = 1.400672 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.400672 pixels
  Position = (1091.9, 801.4) = 6 59 10.90 -55 53 26.7
  Extent = 2.5 (2.1-3.0)", rotation angle = 0
  Source counts = 69.8 +/- 8.4
  Background counts = 0.0
  Rate = 0.0007 +/- 9e-05
[Thu Oct 20 18:25:40 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 18:25:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 18:25:40 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 18:25:40 2011] Source does appear to be extended
[Thu Oct 20 18:25:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 18:26:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 18:26:15 2011] Initial guess for spatial extent in simple fitting = 2.48"
[Thu Oct 20 18:26:15 2011] source mask rpix=5.0, npix_max = 123, mask sum = 121, frac = 0.983
[Thu Oct 20 18:26:15 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 2.48"
[Thu Oct 20 18:26:15 2011] fullrun_ccd1_acisf05356_pi14-548_cl_pass1_src11.ximg exists
[Thu Oct 20 18:26:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05356_pi14-548_cl_pass1_src11.csv
[Thu Oct 20 18:26:16 2011] fullrun_ccd1_acisf05356_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Oct 20 18:26:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05356_pi14-548_cl_pass1_src11.csv
[Thu Oct 20 18:26:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05356_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05356_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 18:26:16 2011] fullrun_ccd1_acisf05356_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Oct 20 18:26:16 2011] fullrun_ccd1_acisf05356_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Oct 20 18:26:16 2011] Fit fullrun_ccd1_acisf05356_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Oct 20 18:26:31 2011] Spatial fit model total counts = 77.975900, observed total counts = 78.000000
[Thu Oct 20 18:26:31 2011] Offset between fit and detection position for source 20 = 0.691735 pixels
[Thu Oct 20 18:26:31 2011] 77.402700 total counts/ 17.022500 bgd. counts: snr = 14.634668
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.691735 pixels
  Position = (1091.5, 800.8) = 6 59 10.92 -55 53 27.0
  Extent = 2.3 (1.9-3.0)", rotation angle = 0
  Source counts = 60.4 +/- 8.8
  Background counts = 17.0
  Rate = 0.0006 +/- 9e-05
[Thu Oct 20 18:26:31 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 18:26:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 18:26:31 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 18:26:31 2011] Source does appear to be extended
[Thu Oct 20 18:26:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 18:27:45 2011] Not overwriting source region fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_src.reg
[Thu Oct 20 18:27:45 2011] Extracting stamp from image fullrun_ccd1_acisf05356_pi14-548_cl_sm2.00.img.gz, (985, 694) - (1198, 907)
[Thu Oct 20 18:27:45 2011] Writing fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20.gif
[Thu Oct 20 18:28:14 2011] ../../acisf05356/products/events/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_src.evt and ../../acisf05356/products/events/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Thu Oct 20 18:28:14 2011] Size of ../../acisf05356/products/events/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_src.evt.gz[events] = 87 counts
[Thu Oct 20 18:28:14 2011] Mean chipx,y = (349.63, 858.40)
[Thu Oct 20 18:28:14 2011] Mean tdetx,y = (4273.60, 4456.63)
[Thu Oct 20 18:28:14 2011] chipx,y range = (317.00-378.00, 833.00-888.00)
[Thu Oct 20 18:28:14 2011] Size of ../../acisf05356/products/events/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 339 counts
[Thu Oct 20 18:28:14 2011] ../../acisf05356/products/images/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_src.img and ../../acisf05356/products/images/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Thu Oct 20 18:28:14 2011] ../../acisf05356/products/spectra/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_src.pi and ../../acisf05356/products/spectra/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Thu Oct 20 18:28:14 2011] Not generating rmf since there are only 60 counts
[Thu Oct 20 18:28:17 2011] ../../acisf05356/products/lightcurves/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_src.lc and ../../acisf05356/products/lightcurves/fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Thu Oct 20 18:28:51 2011] 181.843
[Thu Oct 20 18:32:29 2011] Updating aperture counts using extracted products
[Thu Oct 20 18:32:29 2011] Error reading totcts from fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20_src.pi.gz
[Thu Oct 20 18:32:29 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 18:32:29 2011] Using photon index=1.80, rate=0.000621, arf fullrun_ccd1_acisf05356_pi14-548_pass1_cl_src20.arf
[Thu Oct 20 18:32:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 18:32:29 2011] Updating source flux to 7.4e-15
[Thu Oct 20 18:32:53 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting