[Thu Oct  6 21:25:05 2011] Detection parameters:
  Position = (986.2, 1105.8) = 14 2 28.25 54 16 26.1
  Extent = 0.5" x 0.5", rotation angle = 140 degrees
  Source counts = 105.1 +/- 10.5
  Background counts = 4.9
  Rate = 0.01 +/- 0.001

[Thu Oct  6 21:25:06 2011] Off-axis axis estimate = 5.68'
[Thu Oct  6 21:25:41 2011] Using EEF radius (= 1.48 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 21:25:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 21:25:41 2011] Initial guess for spatial extent in simple fitting = 1.48"
[Thu Oct  6 21:25:41 2011] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.980
[Thu Oct  6 21:25:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.48"
[Thu Oct  6 21:25:41 2011] fullrun_ccd6_acisf05337_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 21:25:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05337_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 21:25:41 2011] fullrun_ccd6_acisf05337_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 21:25:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05337_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 21:25:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf05337_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf05337_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 21:25:41 2011] fullrun_ccd6_acisf05337_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 21:25:41 2011] fullrun_ccd6_acisf05337_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 21:25:41 2011] Fit fullrun_ccd6_acisf05337_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 21:25:46 2011] Spatial fit model total counts = 159.605000, observed total counts = 171.000000
[Thu Oct  6 21:25:46 2011] Offset between fit and detection position for source 8 = 1.064936 pixels
[Thu Oct  6 21:25:46 2011] 159.997300 total counts/ 25.313300 bgd. counts: snr = 26.769584
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.064936 pixels
  Position = (986.0, 1106.8) = 14 2 28.29 54 16 26.4
  Extent = 1.6 (1.3-1.8)", rotation angle = 0
  Source counts = 134.7 +/- 12.6
  Background counts = 25.3
  Rate = 0.01 +/- 0.001
[Thu Oct  6 21:25:46 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 21:25:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 21:25:46 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 21:25:46 2011] Source does appear to be extended
[Thu Oct  6 21:25:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 21:26:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 21:26:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 21:26:02 2011] Initial guess for spatial extent in simple fitting = 1.59"
[Thu Oct  6 21:26:02 2011] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.949
[Thu Oct  6 21:26:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.59"
[Thu Oct  6 21:26:03 2011] fullrun_ccd6_acisf05337_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 21:26:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05337_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 21:26:03 2011] fullrun_ccd6_acisf05337_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 21:26:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf05337_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 21:26:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf05337_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf05337_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 21:26:03 2011] fullrun_ccd6_acisf05337_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 21:26:03 2011] fullrun_ccd6_acisf05337_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 21:26:03 2011] Fit fullrun_ccd6_acisf05337_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 21:26:08 2011] Spatial fit model total counts = 161.948000, observed total counts = 173.000000
[Thu Oct  6 21:26:08 2011] Offset between fit and detection position for source 8 = 0.090354 pixels
[Thu Oct  6 21:26:08 2011] 161.837000 total counts/ 21.140000 bgd. counts: snr = 30.600769
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.090354 pixels
  Position = (986.0, 1106.9) = 14 2 28.29 54 16 26.4
  Extent = 1.6 (1.4-1.9)", rotation angle = 0
  Source counts = 140.7 +/- 12.7
  Background counts = 21.1
  Rate = 0.01 +/- 0.001
[Thu Oct  6 21:26:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 21:26:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 21:26:08 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 21:26:08 2011] Source does appear to be extended
[Thu Oct  6 21:26:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 21:26:42 2011] Not overwriting source region fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_src.reg
[Thu Oct  6 21:26:42 2011] Extracting stamp from image fullrun_ccd6_acisf05337_pi14-548_cl_sm2.00.img.gz, (911, 1032) - (1061, 1182)
[Thu Oct  6 21:26:42 2011] Writing fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8.gif
[Thu Oct  6 21:26:42 2011] ../../acisf05337/products/events/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_src.evt and ../../acisf05337/products/events/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Thu Oct  6 21:26:42 2011] Size of ../../acisf05337/products/events/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_src.evt.gz[events] = 170 counts
[Thu Oct  6 21:26:42 2011] Mean chipx,y = (764.31, 1003.23)
[Thu Oct  6 21:26:42 2011] Mean tdetx,y = (3639.31, 2705.23)
[Thu Oct  6 21:26:42 2011] chipx,y range = (744.00-787.00, 980.00-1022.00)
[Thu Oct  6 21:26:42 2011] Size of ../../acisf05337/products/events/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 39 counts
[Thu Oct  6 21:26:42 2011] ../../acisf05337/products/images/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_src.img and ../../acisf05337/products/images/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Thu Oct  6 21:26:42 2011] ../../acisf05337/products/spectra/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_src.pi and ../../acisf05337/products/spectra/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Thu Oct  6 21:26:46 2011] ../../acisf05337/products/lightcurves/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_src.lc and ../../acisf05337/products/lightcurves/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Thu Oct  6 21:27:00 2011] Keeping rmf generated by specextract
[Thu Oct  6 21:27:00 2011] 190.075
[Thu Oct  6 21:28:13 2011] Updating aperture counts using extracted products
[Thu Oct  6 21:28:13 2011] Error reading totcts from fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_src.pi.gz
[Thu Oct  6 21:28:13 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 21:28:13 2011] Using photon index=1.80, rate=0.0142, arf fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8.arf
[Thu Oct  6 21:28:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 21:28:13 2011] Updating source flux to 1.7e-13
[Thu Oct  6 21:28:22 2011] Reading fit data from acisf05337/analysis//spectral/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_pl.csv
[Thu Oct  6 21:28:22 2011] Spectral fit parameter nH value = 6.1273e+21
[Thu Oct  6 21:28:22 2011] Spectral fit parameter PhoIndex value = 2.45344
[Thu Oct  6 21:28:22 2011] Failed to get F(0.3-8.0) from acisf05337/analysis//spectral/fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 21:28:22 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 21:28:22 2011] Using Nh = 6.1e+21, photon index=2.45, rate=0.0142, arf fullrun_ccd6_acisf05337_pi14-548_pass1_cl_src8.arf
[Thu Oct  6 21:28:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 21:28:22 2011] Updating source flux to 1.4e-13