[Tue Oct 25 23:16:42 2011] Detection parameters:
  Position = (310.0, 92.6) = 7 32 29.98 31 41 50.4
  Extent = 0.5" x 0.5", rotation angle = 57 degrees
  Source counts = 20.8 +/- 4.6
  Background counts = 0.2
  Rate = 0.002 +/- 0.0005

[Tue Oct 25 23:16:43 2011] Off-axis axis estimate = 1.51'
[Tue Oct 25 23:17:16 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 23:17:16 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Oct 25 23:17:16 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.889
[Tue Oct 25 23:17:16 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.39"
[Tue Oct 25 23:17:18 2011] fullrun_ccd2_acisf00530_pi14-548_cl_pass0_src6.ximg exists
[Tue Oct 25 23:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00530_pi14-548_cl_pass0_src6.csv
[Tue Oct 25 23:17:18 2011] fullrun_ccd2_acisf00530_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Oct 25 23:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00530_pi14-548_cl_pass0_src6.csv
[Tue Oct 25 23:17:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00530_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00530_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 23:17:18 2011] fullrun_ccd2_acisf00530_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Oct 25 23:17:18 2011] fullrun_ccd2_acisf00530_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Oct 25 23:17:18 2011] Fit fullrun_ccd2_acisf00530_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Oct 25 23:17:23 2011] Spatial fit model total counts = 23.561300, observed total counts = 24.000000
[Tue Oct 25 23:17:23 2011] Offset between fit and detection position for source 11 = 0.686881 pixels
[Tue Oct 25 23:17:23 2011] 23.235240 total counts/ 2.796240 bgd. counts: snr = 12.222848
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.686881 pixels
  Position = (310.5, 93.1) = 7 32 29.98 31 41 50.4
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 20.4 +/- 4.8
  Background counts = 2.8
  Rate = 0.002 +/- 0.0005
[Tue Oct 25 23:17:23 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 23:17:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 23:17:23 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 23:17:23 2011] Source does appear to be extended
[Tue Oct 25 23:17:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 23:17:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 23:17:44 2011] Initial guess for spatial extent in simple fitting = 0.35"
[Tue Oct 25 23:17:44 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.038
[Tue Oct 25 23:17:44 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.35"
[Tue Oct 25 23:17:44 2011] fullrun_ccd2_acisf00530_pi14-548_cl_pass1_src6.ximg exists
[Tue Oct 25 23:17:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00530_pi14-548_cl_pass1_src6.csv
[Tue Oct 25 23:17:44 2011] fullrun_ccd2_acisf00530_pi14-548_cl_pass1_src6_1.ximg exists
[Tue Oct 25 23:17:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00530_pi14-548_cl_pass1_src6.csv
[Tue Oct 25 23:17:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00530_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00530_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 23:17:44 2011] fullrun_ccd2_acisf00530_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Tue Oct 25 23:17:44 2011] fullrun_ccd2_acisf00530_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Oct 25 23:17:44 2011] Fit fullrun_ccd2_acisf00530_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Oct 25 23:17:50 2011] Spatial fit model total counts = 23.872000, observed total counts = 24.000000
[Tue Oct 25 23:17:50 2011] Offset between fit and detection position for source 11 = 0.028562 pixels
[Tue Oct 25 23:17:50 2011] 23.532540 total counts/ 2.873940 bgd. counts: snr = 12.186024
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.028562 pixels
  Position = (310.5, 93.1) = 7 32 29.98 31 41 50.4
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 20.7 +/- 4.9
  Background counts = 2.9
  Rate = 0.002 +/- 0.0005
[Tue Oct 25 23:17:50 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 23:17:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 23:17:50 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 23:17:50 2011] Source does appear to be extended
[Tue Oct 25 23:17:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 23:19:05 2011] Not overwriting source region fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_src.reg
[Tue Oct 25 23:19:05 2011] Extracting stamp from image fullrun_ccd2_acisf00530_pi14-548_cl_sm2.00.img.gz, (295, 78) - (326, 108)
[Tue Oct 25 23:19:05 2011] Writing fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11.gif
[Tue Oct 25 23:19:22 2011] ../../acisf00530/products/events/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_src.evt and ../../acisf00530/products/events/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Oct 25 23:19:22 2011] Size of ../../acisf00530/products/events/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_src.evt.gz[events] = 21 counts
[Tue Oct 25 23:19:22 2011] Mean chipx,y = (70.76, 945.38)
[Tue Oct 25 23:19:22 2011] Mean tdetx,y = (4006.38, 4015.24)
[Tue Oct 25 23:19:22 2011] chipx,y range = (53.00-87.00, 931.00-963.00)
[Tue Oct 25 23:19:22 2011] Size of ../../acisf00530/products/events/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 3 counts
[Tue Oct 25 23:19:22 2011] ../../acisf00530/products/images/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_src.img and ../../acisf00530/products/images/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Oct 25 23:19:22 2011] ../../acisf00530/products/spectra/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_src.pi and ../../acisf00530/products/spectra/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Oct 25 23:19:22 2011] Not generating rmf since there are only 20 counts
[Tue Oct 25 23:19:25 2011] ../../acisf00530/products/lightcurves/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_src.lc and ../../acisf00530/products/lightcurves/fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Oct 25 23:19:36 2011] 206.407
[Tue Oct 25 23:19:52 2011] Updating aperture counts using extracted products
[Tue Oct 25 23:19:52 2011] Error reading totcts from fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11_src.pi.gz
[Tue Oct 25 23:19:52 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 23:19:52 2011] Using photon index=1.80, rate=0.00206, arf fullrun_ccd2_acisf00530_pi14-548_pass1_cl_src11.arf
[Tue Oct 25 23:19:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 23:19:52 2011] Updating source flux to 2e-14
[Tue Oct 25 23:19:56 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting