Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report srcpi bgdpi arf 1 X191019.18+163912.9 chandra ccd3 611.944 279.611 22.6214 5.47734 0.0155649 0.00376874 82.8856 1 1.83004 1.16523 129.155 13.2584 A T 5.42e+21 2.43799e-13 1 dx
Report srcpi bgdpi arf 1 X191051.80+164543.3 chandra ccd7 796.495 260.166 11.6982 3.42026 0.00804927 0.00235341 22.3053 1 0.941093 0.47426 69.2871 3.11367 F T 5.63e+21 8.12581e-14 1 dsx
Report 1 X191038.49+163550.1 chandra ccd2 803 605 1.98211 1.41421 0.00136381 0.000973065 6.9628 0.999917 1.40511 0.492 66.8014 12.9268 A T 5.64e+21 0 1 d
Report 1 X191110.48+164235.3 chandra ccd6 938.5 596.5 0.994572 1 0.000684326 0.000688061 3.4359 0.99668 0.492 0.492 90 5.12368 F T 5.8e+21 0 1 d

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 7.99 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), T = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest