[Fri Oct  7 08:35:36 2011] Detection parameters:
  Position = (691.5, 666.6) = 10 56 56.31 -3 36 36.3
  Extent = 0.7" x 0.5", rotation angle = 66 degrees
  Source counts = 21.5 +/- 5.2
  Background counts = 5.5
  Rate = 0.0002 +/- 6e-05

[Fri Oct  7 08:35:37 2011] Off-axis axis estimate = 2.70'
[Fri Oct  7 08:36:44 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 08:36:44 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Fri Oct  7 08:36:44 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.916
[Fri Oct  7 08:36:44 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.53"
[Fri Oct  7 08:36:46 2011] fullrun_ccd7_acisf00512_pi14-548_cl_pass0_src28.ximg exists
[Fri Oct  7 08:36:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00512_pi14-548_cl_pass0_src28.csv
[Fri Oct  7 08:36:46 2011] fullrun_ccd7_acisf00512_pi14-548_cl_pass0_src28_1.ximg exists
[Fri Oct  7 08:36:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00512_pi14-548_cl_pass0_src28.csv
[Fri Oct  7 08:36:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00512_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00512_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:36:47 2011] fullrun_ccd7_acisf00512_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Fri Oct  7 08:36:47 2011] fullrun_ccd7_acisf00512_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Oct  7 08:36:47 2011] Fit fullrun_ccd7_acisf00512_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Oct  7 08:37:02 2011] Spatial fit model total counts = 41.000000, observed total counts = 41.000000
[Fri Oct  7 08:37:02 2011] Offset between fit and detection position for source 36 = 0.833435 pixels
[Fri Oct  7 08:37:02 2011] 40.724900 total counts/ 20.587700 bgd. counts: snr = 4.438080
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.833435 pixels
  Position = (691.9, 667.3) = 10 56 56.32 -3 36 36.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 20.1 +/- 6.4
  Background counts = 20.6
  Rate = 0.0002 +/- 7e-05
[Fri Oct  7 08:37:02 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 08:37:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 08:37:02 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 08:37:02 2011] Source does appear to be extended
[Fri Oct  7 08:37:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 08:37:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 08:37:26 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct  7 08:37:26 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.107
[Fri Oct  7 08:37:26 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.56"
[Fri Oct  7 08:37:27 2011] fullrun_ccd7_acisf00512_pi14-548_cl_pass1_src28.ximg exists
[Fri Oct  7 08:37:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00512_pi14-548_cl_pass1_src28.csv
[Fri Oct  7 08:37:27 2011] fullrun_ccd7_acisf00512_pi14-548_cl_pass1_src28_1.ximg exists
[Fri Oct  7 08:37:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00512_pi14-548_cl_pass1_src28.csv
[Fri Oct  7 08:37:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00512_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00512_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:37:28 2011] fullrun_ccd7_acisf00512_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Fri Oct  7 08:37:28 2011] fullrun_ccd7_acisf00512_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Oct  7 08:37:28 2011] Fit fullrun_ccd7_acisf00512_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Oct  7 08:37:42 2011] Spatial fit model total counts = 43.774200, observed total counts = 44.000000
[Fri Oct  7 08:37:42 2011] Offset between fit and detection position for source 36 = 0.013772 pixels
[Fri Oct  7 08:37:42 2011] 43.342200 total counts/ 23.988300 bgd. counts: snr = 3.951562
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.013772 pixels
  Position = (691.9, 667.4) = 10 56 56.32 -3 36 36.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 19.4 +/- 6.6
  Background counts = 24.0
  Rate = 0.0002 +/- 7e-05
[Fri Oct  7 08:37:42 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 08:37:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 08:37:42 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 08:37:42 2011] Source does appear to be extended
[Fri Oct  7 08:37:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 08:40:53 2011] Not overwriting source region fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_src.reg
[Fri Oct  7 08:40:53 2011] Extracting stamp from image fullrun_ccd7_acisf00512_pi14-548_cl_sm2.00.img.gz, (666, 642) - (717, 693)
[Fri Oct  7 08:40:53 2011] Writing fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36.gif
[Fri Oct  7 08:42:12 2011] ../../acisf00512/products/events/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_src.evt and ../../acisf00512/products/events/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Fri Oct  7 08:42:12 2011] Size of ../../acisf00512/products/events/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_src.evt.gz[events] = 25 counts
[Fri Oct  7 08:42:12 2011] Mean chipx,y = (542.32, 591.04)
[Fri Oct  7 08:42:12 2011] Mean tdetx,y = (4459.32, 2293.04)
[Fri Oct  7 08:42:12 2011] chipx,y range = (523.00-557.00, 572.00-608.00)
[Fri Oct  7 08:42:12 2011] Size of ../../acisf00512/products/events/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 74 counts
[Fri Oct  7 08:42:12 2011] ../../acisf00512/products/images/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_src.img and ../../acisf00512/products/images/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Fri Oct  7 08:42:12 2011] ../../acisf00512/products/spectra/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_src.pi and ../../acisf00512/products/spectra/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Fri Oct  7 08:42:12 2011] Not generating rmf since there are only 19 counts
[Fri Oct  7 08:42:15 2011] ../../acisf00512/products/lightcurves/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_src.lc and ../../acisf00512/products/lightcurves/fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Fri Oct  7 08:43:14 2011] 240.4
[Fri Oct  7 08:43:20 2011] Updating aperture counts using extracted products
[Fri Oct  7 08:43:20 2011] Error reading totcts from fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36_src.pi.gz
[Fri Oct  7 08:43:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 08:43:20 2011] Using photon index=1.80, rate=0.000217, arf fullrun_ccd7_acisf00512_pi14-548_pass1_cl_src36.arf
[Fri Oct  7 08:43:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 08:43:20 2011] Updating source flux to 1.2e-15
[Fri Oct  7 08:44:13 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting