[Fri Oct  7 08:35:31 2011] Detection parameters:
  Position = (357.0, 944.6) = 10 56 59.42 -3 42 39.0
  Extent = 0.9" x 0.6", rotation angle = 89 degrees
  Source counts = 27.3 +/- 5.5
  Background counts = 2.7
  Rate = 0.0003 +/- 6e-05

[Fri Oct  7 08:35:32 2011] Off-axis axis estimate = 3.45'
[Fri Oct  7 08:36:43 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 08:36:43 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Fri Oct  7 08:36:43 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.846
[Fri Oct  7 08:36:43 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.68"
[Fri Oct  7 08:36:43 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct  7 08:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 08:36:43 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct  7 08:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 08:36:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:36:44 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct  7 08:36:44 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct  7 08:36:44 2011] Fit fullrun_ccd6_acisf00512_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct  7 08:36:56 2011] Spatial fit model total counts = 32.897700, observed total counts = 33.000000
[Fri Oct  7 08:36:56 2011] Offset between fit and detection position for source 8 = 1.384260 pixels
[Fri Oct  7 08:36:56 2011] 31.945980 total counts/ 6.730480 bgd. counts: snr = 9.719514
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.384260 pixels
  Position = (357.5, 945.9) = 10 56 59.42 -3 42 38.6
  Extent = 0.8 (0.6-1.3)", rotation angle = 0
  Source counts = 25.2 +/- 5.7
  Background counts = 6.7
  Rate = 0.0003 +/- 6e-05
[Fri Oct  7 08:36:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 08:36:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 08:36:56 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 08:36:56 2011] Source does appear to be extended
[Fri Oct  7 08:36:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 08:37:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 08:37:23 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Fri Oct  7 08:37:23 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.114
[Fri Oct  7 08:37:23 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.80"
[Fri Oct  7 08:37:25 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct  7 08:37:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 08:37:25 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct  7 08:37:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 08:37:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:37:25 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct  7 08:37:25 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct  7 08:37:25 2011] Fit fullrun_ccd6_acisf00512_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct  7 08:37:36 2011] Spatial fit model total counts = 34.995600, observed total counts = 35.000000
[Fri Oct  7 08:37:36 2011] Offset between fit and detection position for source 8 = 0.119603 pixels
[Fri Oct  7 08:37:36 2011] 34.576100 total counts/ 12.161800 bgd. counts: snr = 6.427266
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.119603 pixels
  Position = (357.3, 945.8) = 10 56 59.42 -3 42 38.6
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 22.4 +/- 5.9
  Background counts = 12.2
  Rate = 0.0003 +/- 7e-05
[Fri Oct  7 08:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 08:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 08:37:36 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 08:37:36 2011] Source does appear to be extended
[Fri Oct  7 08:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 08:39:33 2011] Not overwriting source region fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_src.reg
[Fri Oct  7 08:39:33 2011] Extracting stamp from image fullrun_ccd6_acisf00512_pi14-548_cl_sm2.00.img.gz, (325, 913) - (390, 979)
[Fri Oct  7 08:39:33 2011] Writing fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8.gif
[Fri Oct  7 08:40:06 2011] ../../acisf00512/products/events/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_src.evt and ../../acisf00512/products/events/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri Oct  7 08:40:06 2011] Size of ../../acisf00512/products/events/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_src.evt.gz[events] = 28 counts
[Fri Oct  7 08:40:06 2011] Mean chipx,y = (886.18, 330.43)
[Fri Oct  7 08:40:06 2011] Mean tdetx,y = (3761.18, 2032.43)
[Fri Oct  7 08:40:06 2011] chipx,y range = (869.00-909.00, 313.00-347.00)
[Fri Oct  7 08:40:06 2011] Size of ../../acisf00512/products/events/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 19 counts
[Fri Oct  7 08:40:06 2011] ../../acisf00512/products/images/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_src.img and ../../acisf00512/products/images/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri Oct  7 08:40:06 2011] ../../acisf00512/products/spectra/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_src.pi and ../../acisf00512/products/spectra/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri Oct  7 08:40:06 2011] Not generating rmf since there are only 22 counts
[Fri Oct  7 08:40:10 2011] ../../acisf00512/products/lightcurves/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_src.lc and ../../acisf00512/products/lightcurves/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri Oct  7 08:40:46 2011] 213.681
[Fri Oct  7 08:43:19 2011] Updating aperture counts using extracted products
[Fri Oct  7 08:43:19 2011] Error reading totcts from fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8_src.pi.gz
[Fri Oct  7 08:43:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 08:43:19 2011] Using photon index=1.80, rate=0.000251, arf fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src8.arf
[Fri Oct  7 08:43:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 08:43:19 2011] Updating source flux to 2.3e-15
[Fri Oct  7 08:43:51 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting