[Fri Oct  7 08:35:32 2011] Detection parameters:
  Position = (465.4, 644.2) = 10 56 55.85 -3 45 6.8
  Extent = 0.9" x 0.6", rotation angle = 5 degrees
  Source counts = 44.0 +/- 6.9
  Background counts = 3.0
  Rate = 0.0005 +/- 8e-05

[Fri Oct  7 08:35:32 2011] Off-axis axis estimate = 5.80'
[Fri Oct  7 08:36:43 2011] Using EEF radius (= 1.53 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 08:36:43 2011] Initial guess for spatial extent in simple fitting = 1.53"
[Fri Oct  7 08:36:43 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.936
[Fri Oct  7 08:36:43 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 1.53"
[Fri Oct  7 08:36:43 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src8.ximg exists
[Fri Oct  7 08:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src8.csv
[Fri Oct  7 08:36:43 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src8_1.ximg exists
[Fri Oct  7 08:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src8.csv
[Fri Oct  7 08:36:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00512_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:36:44 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Fri Oct  7 08:36:44 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Oct  7 08:36:44 2011] Fit fullrun_ccd6_acisf00512_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Oct  7 08:36:56 2011] Spatial fit model total counts = 108.653000, observed total counts = 111.000000
[Fri Oct  7 08:36:56 2011] Offset between fit and detection position for source 26 = 3.653758 pixels
[Fri Oct  7 08:36:56 2011] 109.027313 total counts/ 0.954313 bgd. counts: snr = 110.629713
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.653758 pixels
  Position = (468.0, 641.6) = 10 56 55.79 -3 45 8.2
  Extent = 2.2 (1.3-2.6)", rotation angle = 0
  Source counts = 108.1 +/- 10.4
  Background counts = 1.0
  Rate = 0.001 +/- 0.0001
[Fri Oct  7 08:36:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 08:36:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 08:36:56 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 08:36:56 2011] Source does appear to be extended
[Fri Oct  7 08:36:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 08:37:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 08:37:23 2011] Initial guess for spatial extent in simple fitting = 2.19"
[Fri Oct  7 08:37:23 2011] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.023
[Fri Oct  7 08:37:23 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 2.19"
[Fri Oct  7 08:37:25 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src8.ximg exists
[Fri Oct  7 08:37:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src8.csv
[Fri Oct  7 08:37:25 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Oct  7 08:37:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src8.csv
[Fri Oct  7 08:37:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00512_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:37:25 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Oct  7 08:37:25 2011] fullrun_ccd6_acisf00512_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Oct  7 08:37:25 2011] Fit fullrun_ccd6_acisf00512_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Oct  7 08:37:36 2011] Spatial fit model total counts = 123.522000, observed total counts = 126.000000
[Fri Oct  7 08:37:36 2011] Offset between fit and detection position for source 26 = 0.645949 pixels
[Fri Oct  7 08:37:36 2011] 124.743100 total counts/ 17.807100 bgd. counts: snr = 25.341209
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.645949 pixels
  Position = (467.5, 642.0) = 10 56 55.80 -3 45 8.1
  Extent = 2.1 (1.7-2.4)", rotation angle = 0
  Source counts = 106.9 +/- 11.2
  Background counts = 17.8
  Rate = 0.001 +/- 0.0001
[Fri Oct  7 08:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 08:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 08:37:36 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 08:37:36 2011] Source does appear to be extended
[Fri Oct  7 08:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 08:39:33 2011] Not overwriting source region fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_src.reg
[Fri Oct  7 08:39:33 2011] Extracting stamp from image fullrun_ccd6_acisf00512_pi14-548_cl_sm2.00.img.gz, (373, 548) - (562, 736)
[Fri Oct  7 08:39:33 2011] Writing fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26.gif
[Fri Oct  7 08:40:00 2011] ../../acisf00512/products/events/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_src.evt and ../../acisf00512/products/events/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri Oct  7 08:40:00 2011] Size of ../../acisf00512/products/events/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_src.evt.gz[events] = 130 counts
[Fri Oct  7 08:40:00 2011] Mean chipx,y = (563.67, 365.98)
[Fri Oct  7 08:40:00 2011] Mean tdetx,y = (3438.67, 2067.98)
[Fri Oct  7 08:40:00 2011] chipx,y range = (542.00-594.00, 340.00-390.00)
[Fri Oct  7 08:40:00 2011] Size of ../../acisf00512/products/events/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 175 counts
[Fri Oct  7 08:40:00 2011] ../../acisf00512/products/images/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_src.img and ../../acisf00512/products/images/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri Oct  7 08:40:00 2011] ../../acisf00512/products/spectra/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_src.pi and ../../acisf00512/products/spectra/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri Oct  7 08:40:03 2011] ../../acisf00512/products/lightcurves/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_src.lc and ../../acisf00512/products/lightcurves/fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri Oct  7 08:40:46 2011] Keeping rmf generated by specextract
[Fri Oct  7 08:40:46 2011] 200.995
[Fri Oct  7 08:43:19 2011] Updating aperture counts using extracted products
[Fri Oct  7 08:43:19 2011] Error reading totcts from fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26_src.pi.gz
[Fri Oct  7 08:43:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 08:43:19 2011] Using photon index=1.80, rate=0.0012, arf fullrun_ccd6_acisf00512_pi14-548_pass1_cl_src26.arf
[Fri Oct  7 08:43:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 08:43:19 2011] Updating source flux to 1.1e-14