[Mon Oct 31 11:25:15 2011] Detection parameters:
  Position = (722.1, 1110.2) = 12 47 53.52 -41 22 59.9
  Extent = 2.6" x 1.2", rotation angle = 52 degrees
  Source counts = 12.6 +/- 4.8
  Background counts = 10.4
  Rate = 0.0004 +/- 0.0002

[Mon Oct 31 11:25:15 2011] Off-axis axis estimate = 10.96'
[Mon Oct 31 11:27:04 2011] Using EEF radius (= 5.34 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 11:27:04 2011] Initial guess for spatial extent in simple fitting = 5.34"
[Mon Oct 31 11:27:04 2011] source mask rpix=10.8, npix_max = 515, mask sum = 479, frac = 0.930
[Mon Oct 31 11:27:04 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 5.34"
[Mon Oct 31 11:27:04 2011] fullrun_ccd2_acisf00504_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 31 11:27:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00504_pi14-548_cl_pass0_src3.csv
[Mon Oct 31 11:27:04 2011] fullrun_ccd2_acisf00504_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 31 11:27:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00504_pi14-548_cl_pass0_src3.csv
[Mon Oct 31 11:27:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00504_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00504_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 11:27:04 2011] fullrun_ccd2_acisf00504_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 31 11:27:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00504_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Oct 31 11:27:04 2011] fullrun_ccd2_acisf00504_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 31 11:27:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00504_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Oct 31 11:27:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00504_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00504_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 11:27:11 2011] Spatial fit model total counts = 111.137000, observed total counts = 100.000000
[Mon Oct 31 11:27:11 2011] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Oct 31 11:27:11 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 11:27:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 11:27:11 2011] Assessing source extent using major
[Mon Oct 31 11:27:11 2011] Source does appear to be extended
[Mon Oct 31 11:27:11 2011] Computing asymmetry using major and minor axis, asym = 2.10
[Mon Oct 31 11:27:11 2011] Source is asymmetric
[Mon Oct 31 11:27:11 2011] Deleting source due to low Poisson probability 0.8