[Fri Sep 23 13:02:14 2011] Detection parameters:
  Position = (750.6, 211.5) = 14 49 4.51 9 3 38.5
  Extent = 0.5" x 0.5", rotation angle = 180 degrees
  Source counts = 66.4 +/- 8.2
  Background counts = 0.6
  Rate = 0.002 +/- 0.0003

[Fri Sep 23 13:02:15 2011] Off-axis axis estimate = 2.32'
[Fri Sep 23 13:03:18 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:18 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Sep 23 13:03:18 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.073
[Fri Sep 23 13:03:18 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.47"
[Fri Sep 23 13:03:18 2011] fullrun_ccd1_acisf05032_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 23 13:03:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05032_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 13:03:18 2011] fullrun_ccd1_acisf05032_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 23 13:03:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05032_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 13:03:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05032_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05032_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:03:18 2011] fullrun_ccd1_acisf05032_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 23 13:03:18 2011] fullrun_ccd1_acisf05032_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 23 13:03:18 2011] Fit fullrun_ccd1_acisf05032_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 23 13:03:29 2011] Spatial fit model total counts = 67.075500, observed total counts = 68.000000
[Fri Sep 23 13:03:29 2011] Offset between fit and detection position for source 1 = 0.718391 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.718391 pixels
  Position = (751.1, 212.0) = 14 49 4.51 9 3 38.5
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 66.8 +/- 8.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 13:03:29 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:03:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:03:29 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:03:29 2011] Source does appear to be extended
[Fri Sep 23 13:03:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:03:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 13:03:57 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Sep 23 13:03:57 2011] source mask rpix=1.1, npix_max = 9, mask sum = 16, frac = 1.632
[Fri Sep 23 13:03:57 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.52"
[Fri Sep 23 13:03:59 2011] fullrun_ccd1_acisf05032_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 23 13:03:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05032_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 13:03:59 2011] fullrun_ccd1_acisf05032_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 23 13:03:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf05032_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 13:03:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf05032_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf05032_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:03:59 2011] fullrun_ccd1_acisf05032_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 23 13:03:59 2011] fullrun_ccd1_acisf05032_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 23 13:03:59 2011] Fit fullrun_ccd1_acisf05032_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 23 13:04:09 2011] Spatial fit model total counts = 68.641100, observed total counts = 69.000000
[Fri Sep 23 13:04:09 2011] Offset between fit and detection position for source 1 = 0.021681 pixels
[Fri Sep 23 13:04:09 2011] 68.443280 total counts/ 2.234580 bgd. counts: snr = 44.291165
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021681 pixels
  Position = (751.1, 212.0) = 14 49 4.51 9 3 38.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 66.2 +/- 8.3
  Background counts = 2.2
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 13:04:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:04:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:04:09 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:04:09 2011] Source does appear to be extended
[Fri Sep 23 13:04:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:05:48 2011] Not overwriting source region fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 13:05:48 2011] Extracting stamp from image fullrun_ccd1_acisf05032_pi14-548_cl_sm2.00.img.gz, (728, 189) - (774, 235)
[Fri Sep 23 13:05:48 2011] Writing fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 13:06:00 2011] ../../acisf05032/products/events/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_src.evt and ../../acisf05032/products/events/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 13:06:00 2011] Size of ../../acisf05032/products/events/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_src.evt.gz[events] = 67 counts
[Fri Sep 23 13:06:00 2011] Mean chipx,y = (176.18, 897.10)
[Fri Sep 23 13:06:00 2011] Mean tdetx,y = (4234.90, 4283.18)
[Fri Sep 23 13:06:00 2011] chipx,y range = (161.00-196.00, 879.00-913.00)
[Fri Sep 23 13:06:00 2011] Size of ../../acisf05032/products/events/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 5 counts
[Fri Sep 23 13:06:00 2011] ../../acisf05032/products/images/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_src.img and ../../acisf05032/products/images/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 13:06:00 2011] ../../acisf05032/products/spectra/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_src.pi and ../../acisf05032/products/spectra/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 23 13:06:00 2011] Not generating rmf since there are only 66 counts
[Fri Sep 23 13:06:03 2011] ../../acisf05032/products/lightcurves/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_src.lc and ../../acisf05032/products/lightcurves/fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 13:07:59 2011] 202.987
[Fri Sep 23 13:10:48 2011] Updating aperture counts using extracted products
[Fri Sep 23 13:10:48 2011] Error reading totcts from fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 23 13:10:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:10:49 2011] Using photon index=1.80, rate=0.0023, arf fullrun_ccd1_acisf05032_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 13:10:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:10:49 2011] Updating source flux to 2.6e-14
[Fri Sep 23 13:10:57 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting