[Fri Sep 23 13:02:13 2011] Detection parameters:
  Position = (236.1, 676.8) = 14 48 57.05 9 1 21.9
  Extent = 0.5" x 0.5", rotation angle = 4 degrees
  Source counts = 57.1 +/- 7.6
  Background counts = 0.9
  Rate = 0.002 +/- 0.0003

[Fri Sep 23 13:02:13 2011] Off-axis axis estimate = 2.72'
[Fri Sep 23 13:03:16 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:16 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Fri Sep 23 13:03:16 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.910
[Fri Sep 23 13:03:16 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.53"
[Fri Sep 23 13:03:18 2011] fullrun_ccd0_acisf05032_pi14-548_cl_pass0_src10.ximg exists
[Fri Sep 23 13:03:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05032_pi14-548_cl_pass0_src10.csv
[Fri Sep 23 13:03:18 2011] fullrun_ccd0_acisf05032_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Sep 23 13:03:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05032_pi14-548_cl_pass0_src10.csv
[Fri Sep 23 13:03:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05032_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05032_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:03:18 2011] fullrun_ccd0_acisf05032_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 23 13:03:18 2011] fullrun_ccd0_acisf05032_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 23 13:03:18 2011] Fit fullrun_ccd0_acisf05032_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Sep 23 13:03:28 2011] Spatial fit model total counts = 60.251400, observed total counts = 59.000000
[Fri Sep 23 13:03:28 2011] Offset between fit and detection position for source 21 = 0.646936 pixels
[Fri Sep 23 13:03:28 2011] 60.751450 total counts/ 6.770750 bgd. counts: snr = 20.745319
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.646936 pixels
  Position = (236.6, 677.2) = 14 48 57.05 9 1 21.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 54.0 +/- 7.8
  Background counts = 6.8
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 13:03:28 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:03:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:03:28 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:03:28 2011] Source does appear to be extended
[Fri Sep 23 13:03:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:03:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:56 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Sep 23 13:03:56 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.935
[Fri Sep 23 13:03:56 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.52"
[Fri Sep 23 13:03:56 2011] fullrun_ccd0_acisf05032_pi14-548_cl_pass1_src10.ximg exists
[Fri Sep 23 13:03:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05032_pi14-548_cl_pass1_src10.csv
[Fri Sep 23 13:03:56 2011] fullrun_ccd0_acisf05032_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Sep 23 13:03:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf05032_pi14-548_cl_pass1_src10.csv
[Fri Sep 23 13:03:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf05032_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf05032_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:03:57 2011] fullrun_ccd0_acisf05032_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 23 13:03:57 2011] fullrun_ccd0_acisf05032_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 23 13:03:57 2011] Fit fullrun_ccd0_acisf05032_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 23 13:04:07 2011] Spatial fit model total counts = 58.917400, observed total counts = 59.000000
[Fri Sep 23 13:04:07 2011] Offset between fit and detection position for source 21 = 0.006994 pixels
[Fri Sep 23 13:04:07 2011] 59.422060 total counts/ 6.687860 bgd. counts: snr = 20.391481
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.006994 pixels
  Position = (236.6, 677.2) = 14 48 57.05 9 1 21.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 52.7 +/- 7.7
  Background counts = 6.7
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 13:04:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:04:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:04:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:04:07 2011] Source does appear to be extended
[Fri Sep 23 13:04:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:04:36 2011] Not overwriting source region fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_src.reg
[Fri Sep 23 13:04:36 2011] Extracting stamp from image fullrun_ccd0_acisf05032_pi14-548_cl_sm2.00.img.gz, (213, 654) - (260, 701)
[Fri Sep 23 13:04:36 2011] Writing fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21.gif
[Fri Sep 23 13:05:34 2011] ../../acisf05032/products/events/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_src.evt and ../../acisf05032/products/events/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Fri Sep 23 13:05:34 2011] Size of ../../acisf05032/products/events/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_src.evt.gz[events] = 55 counts
[Fri Sep 23 13:05:34 2011] Mean chipx,y = (879.93, 822.36)
[Fri Sep 23 13:05:34 2011] Mean tdetx,y = (3883.36, 4252.07)
[Fri Sep 23 13:05:34 2011] chipx,y range = (862.00-900.00, 804.00-839.00)
[Fri Sep 23 13:05:34 2011] Size of ../../acisf05032/products/events/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 5 counts
[Fri Sep 23 13:05:34 2011] ../../acisf05032/products/images/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_src.img and ../../acisf05032/products/images/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Fri Sep 23 13:05:34 2011] ../../acisf05032/products/spectra/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_src.pi and ../../acisf05032/products/spectra/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Fri Sep 23 13:05:34 2011] Not generating rmf since there are only 52 counts
[Fri Sep 23 13:05:41 2011] ../../acisf05032/products/lightcurves/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_src.lc and ../../acisf05032/products/lightcurves/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Fri Sep 23 13:05:48 2011] 201.317
[Fri Sep 23 13:10:48 2011] Updating aperture counts using extracted products
[Fri Sep 23 13:10:48 2011] Error reading totcts from fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_src.pi.gz
[Fri Sep 23 13:10:48 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:10:48 2011] Using photon index=1.80, rate=0.00183, arf fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21.arf
[Fri Sep 23 13:10:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:10:48 2011] Updating source flux to 2.1e-14
[Fri Sep 23 13:10:55 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 13:10:56 2011] acisf05032/analysis//spectral/fullrun_ccd0_acisf05032_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete